SPECIAL REPAIRS TO BUILDING NO P 171 COOK HOUSE OF 4 PARA SF UNDER GE SOUTH UDHAMPUR

Amount

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down chowkat or frame with shutters n.exe 1.50 sqm (without taking off shutter from frame) each complete all as specified and as directed.

Taking down chowkator frame with shutters.exe 1.50 sqm and n exe 4 sqm (without taking off shutter from the frame) each complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Demolition of reinforced cement conrete (reinforcement cut as required to facilitate demoletion) of roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.

Dismantling water tanks and removing to store exc 1000 & n.exc 2000 ltrs of capacity complete all as specified and as directed.

M & L for brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

All as per item No 10 above but except bricks complete all as specified and as directed.

Removing of cement mortar frome bricks and cleaning bricks, stacking for measurement ncluding all extra handling and removal and disposing off rubbish complete all as specified and as directed.

All as per item No 12 above but as in half brick thick wall built in Cement mortar 1:4 complete all as specified and directed.

M&L (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintel over 1.5m span etc complete all as specified and as directed.

M&L mild steel TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 15 aove but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-I using 20 mm graded stone aggregate as in cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and as directed.

Use and waste of formwork to soffits of floor or roof beams, beam haunching, grider, bressumber, lintels, cantilever, sleves including supports, over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and as directed.

M & L Providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and as directed

M&L 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and as directed

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and as directed

Material and labour for Providing cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates as in filling of pressed steel door frame all as specified and as directed.

Material and labour for plain cement concrete type E-2, 1:5:10 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge/GE.

Rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and as directed

Rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in CM 1:4 and second coat to be applied with WPC and recrone polyster fibre including fair finishing (WPC will be measured and paid separately) complete all as specified and as directed

Supply only liquid water proofing compound complete all as specified and as directed

Material and labour for sand filling as a cushioning/ bedding complete all as specified and as directed by Engr-in-charge/GE.

M & L vitrified ceramic tiles (dark shade) 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed

M & L vitrified ceramic tiles (dark shade) 10 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqm, in skirting or dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick rendering in cement mortar 1:4 all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M & L for non skid coloured digital tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 20mm thick cement screed bed of CM (1:6) complete all as specified and directed. Make : Johnson/Kajaria/Orient

M&L for glazed ceramic digital tiles 450x350x7mm / 300X600X7 MM thick coloured/printed in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade as in skirting/dado over and including 15mm thick cement screed bed (rendering) in CM (1:4) complete all as specified and directed. Make : Johson/Kajaria/Orient.

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps jambs pillers , window-cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 gradewith grey cement and no pigment complete all as specified and as directed by Engr-in-charge.

M & L for Stone kerb of roughly squared stones of size 20cm x 30cm,dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar1:6 and struckflush

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations

M & L for preparation of new /old decorated distempered surfaces of walls and apply two coat of oil emulsion distemper to walls complete all as directed.

M & L for 3mm thick wall care putty on wall surfaces complete all as specified and directed

M & L for preparation of complete removal of new /old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots and applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed

M & L for Mirror polishing on marble/ granite/ Kota stone/ any type of stone work where ever required to give high gloss finish complete all as specified and as directed

M&L for 2nd class hard wood fillets of area exceeding 13 and not exceeding 25 sq Cm as clean sawn, fixed complete all as specified and directed.

S&F ply wood board 18/19mm thick intirior grade laminated one side with mica shed as approved by EIC complete all as directed.

S&F cupboard locks 4 lever brass grade -I , 75mm complete all as specified and directed.

S&F for Powder Coating anodised aluminum frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F for Powder Coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc.complete all as specified and as directed

S&F for Powder Coating anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg /m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and as directed

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair 150 mm long aluminium handles, cast type anodised, complete all as specified and as directed

S&F in repair Butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pins, anodised and fixed, type B-21 complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F10 mm thick sheet Toughned glass as in hinged door ,partition automatic doors and similar work including cutting to shape,drilling holes required ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames complete all as specified and directed.

S&F as in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F aluminium grill of mesh size 50 mm x 50 mm fixed to aluminum window frame complete all as specified and direceted.

M&L in repair for 9mm thick prelaminated particle board, interior grade, prelaminated both sides decorative choice lamination fixed with aluminum beading and gaskit to aluminum frame work complete all as specified and directed.

S/F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet rainforced with MS square tabe fixed in opening as per drg and complete all as specified and as directed

S&F Factory with partical board core Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for 35 mm thick factory made, 2nd class hard wood , plain framed, panelled shutters (two or more panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b).

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item as above here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note :- i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed

Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm complete all as specified and as directed

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed.

S&F for 250 mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F for 150 mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for 150 mm Aluminium anodised,handle, cast type anodised complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed

M&L solid PVC wall panelling with 5mm thickness and size of each pannel 200mm wide with wood grain printed PVC Sheet complete including locking beading and PVC Sheet filet of wiudth 35mm for wall paneling inclusive of of fixing on to wall surface complete all as directed and specified

Taking up or down, steel tubing 15mm bore, and connection, in cluding cleaning complete all as specified and as directed

Taking up or down, steel tubing 20mm bore, and connection, in cluding cleaning complete all as specified and as directed.

Re-fixing 15 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and as directed.

Re-fixing 20 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and as directed.

Supply and fix galvanized steel tubing, medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and directed.

Supply and fix galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to laid in trenches all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and as directed.

S&F brass CP mixture unit 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and direcetd.

S&F 15 mm dia angle valve fancy type chromium plated cast copper alloy high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S&F as in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.

S&F 15mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and as directed.

S&F PVC connection 15mm size PTMT nuts of length450mm complete all as specified and as directed.

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F as in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

S&F in repairs toilet paper holder stainless steel chromium plated rod size 75 mm complete all as specified and direcetd.

Disconnecting existing tanks of capacity exc. 250 & n exc. 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with thread closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 2000 liters including all accessories complete all as specified and as directed.

S&F Vitreous china Urinal, Half stall type white match with urinal fittings all as specified and as directed.

S&F waste coupling 32mm dia CP Brass for WHB complete all as specified and as directed.

Supply and fix for 110mm dia PVC (SWR) pipes double socketed in any length with rubbing ring joints fixed to walls complete all as specified and as directed.

Supply and fixing of 110mm dia PVC (SWR) bends for any radius complete all as specified and as directed.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR), junction double, (single T), equal or unequal with access door complete all as specified and as directed.

S&F 110mm PVC (SWR) branch piece, single Y piece equal or unequal complete all as specified and as directed.

S&F soap dish CP brass complete all as specefied and as directed

S & F in rep Vitreous China wash basin, white, flat back, size 550x400 including taps, but fixing 15mm size CP pillar tap, 32mm dia PVC waste coupling, fixing over existing brackets but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair PVC valveless syphonic capacity 10 ltr low level with inlet, ball valve, float and handle including brackets action type flushing cistern as fixed in repair.

S&F in repairs drapery rod of 25mm dia stainless steel 304 grade along with brackets and end caps of quality as approved by GE.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.5 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails,frame works as in door frame and fastenings and heavy bracket framing (Beam,coloum, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Supply and fix Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix table top vitreous china wash hand basin white of size 650 x 420 x 110mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge/GE.

S&F vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified.

Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all as specified and as directed by the Engineer-in-Charge/GE.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and as directed by the Engineer-in-Charge/GE.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 119 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per srl item No 119 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per Srl item No 119 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE.

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge/GE.

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge/GE.

S&F fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically complete all as specified and directed.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge/GE.

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge/GE.

S&F in replacement single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge/GE.

S&F in replacement 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engineer-in-Charge/GE.

S&F in replacement Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F replacement MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed.

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 4 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification make-Indo asian/Havells/ Legrand/Indoasian Elvira/ Schneider complete all as specified and directed.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and as directed.

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection all as specified and direceted by Engr-in-charge/GE.

Supply and fix ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection all as specified and direceted by Engr-in-charge/GE.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Material and labour for Fixing & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 4 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately.

Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in any type of soil and getting out all as specified and as directed.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified and as directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete as specified. Note : for payment purpose punned thickness shall be measured

M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

jyoti parkash sharma (BID ID -3173989)

M/s ARJUN SINGH (BID ID -3162971)

M/s AKHIL SHARMA (BID ID -3168547)

anil construction co. (BID ID -3165828)