SPL REPAIR TO BLDG NO P43 MD ACCN AT OLD AMRITSAR CANTT

Amount

Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

Taking down chowkhats or frame without taking of shutter and removing from site exc 1.5sqm but not n.exe 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame without taking of shutter and removing from site n.exc 1.5sqm each complete all as specified and directed.

Taking down cement plaster of any thickness from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries of the premises where directed complete all as specified and directed.

Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris of the premises where directed complete all as specified and directed.

Demolition of RCC in any position not otherwise specifically provided and dispose off debris of the premises where directed complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified and as directed.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris,rubbish of the premises complete all as specified and directed.

Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for brick work with sub Class 'B' old size bricks, except bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified and as directed. Note: Old bricks obtained from Item no 8 above shall be used after cleaning etc.

Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan to any radius, in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

Material and Labour for 12 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement.

Material and Labour for 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement.

Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even with water proofing compound Complete all as specified and directed. (Note: Supply of water proofing compound will be measured and paid separately)

Material and Labour for preparing newly plastered or pointed surface of wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and as directed.

Material and Labour for preparation of old decorated plastered surfaces, filling nail holes or patches with wall care putty to make surface smooth and applying two coats of oil bound distemper on walls complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces and applying one coat on old surface filling holes or patches as on ceiling complete all as specified and as directed.

Material and Labour for Preparing of new plastered surface and applying two coats cement base paints on walls complete as specified

Material and Labour for complete removal of existing treament including preparation of surfaces and applying two coats of cement base paint on old walls all as specified and as directed.

Supply and Fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening complete all as specified and as directed.

Supply and Fixing factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below complete, all as specified and directed. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid seperately.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete, all as specified and directed. Note-Sheet glass and painting shall be measured and paid Separately.

Supply and Fixing 30 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified and as directed.

Supply and Fixing 30 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters complete all as specified and as directed.

Material and Labour for 16-18mm thick PVC board in cup board shelve including matching Iron-on hot melt glue PVC edge band as in kitchen complete all as specified (Make / shade / design / size as approved by GE)

Material and Labour for 20 mm thick PVC shutter, printed one side with one coating of ultra violet chemical, glossymat finish, 100% termite/water proof, fire retardant, . Weight not less than 12 kg per sqm including Steel piano hinges, steel magnet catcher,aluminium handle 100 mm long ,aluminium hasp & staple ( shade / design / size as approved by GE) complete all as specified and as directed.

Hacking out old broken glass any thickness, size, quality or description from steel frames with oil glazing pin, glazed with putty or fixed with beads Complete all as specified

Supply and Fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and as directed.

Supply and Fixing 300 mm size, aluminium alloy,anodized sliding door bolt, clip type, and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw complete all as specified and as directed.

Supply and fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw complete all as specified and directed

Supply and fixing in 150 mm size aluminium anodized barrel tower bolt of extruded section fixed with stainless steel screw complete all as specified and as directed.

Supply and fixing in repairs 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

Supply and Fixing in repairs 125 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified and as directed.

Supply and Fixing in repairs mild steel curtain rod with brackets,finnial and fixed with stainless steel screw complete all as specified and as directed.

Material and Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and Labour for applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified and as directed. Note :- The quoted rates shall include for necessary excavation and earth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 20mm complete all as specified and as directed. Note :- The quoted rates shall include for necessary excavation and earth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed

Supply and Fixing 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and Fixing 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing Grating round 125mm size of PTMT ( minimum weight 50gms) complete all as specified and as directed.

Supply and fixing in repairs PVC connection 450mm long of 15mm size with PTMT nuts on both sides complete all as specified and as directed.

Supply and fixing in repairs bib tap cast copper alloy chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified and as directed.

Supply and fixing in repairs pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.

Supply and Fixing stop cock 15mm bore dia, chromium plated fancy type, cast copper alloy,screwed down,high pressure, with crutch orbutterfly handle,screwed both ends for ironpipe or for unions complete fixed in repairs.

Supply and Fixing angle valve 15mm bore dia, chromium plated fancy type, cast copper alloy,screwed down,high pressure, with crutch orbutterfly handle,screwed both ends for ironpipe or for unions complete fixed in repairs.

Supply and Fixing in repairs for 15mm bore stop valves, cast copper alloy, concealed type, chromium plated with long shank and cup ,screwed down,handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply & fixing in replacement vitreous China squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rests including lime concrete for fixing the trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified and as directed.

Supplying and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle including pipe 32mm dia of PVC(Heavy duty) flush pipe including brackets and taking down/dismantling old unserviceable cistern complete all as specified and as directed.

Supply and Fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and as directed.

Supply and fixing rotational moulded polythelene water storage tanks(multi layer) capacity 500 litres(cylindrical vertical with closed top), with and including 20mm dia PTMT ball valve with epoxy coated aluminium rod ( minium weight 210gms ) hoisted, fixed in position and making connection including dismantling of existing unserviceable tank Exc 250 Ltr & not Exc 500 Ltr complete all as specified and as directed.

Supply and fixing in repairs stainless steel kitchen plate rack size 75cm X75cm ,25cm deep made of 1mm stainless weight not less than 7.5 kg sheet fixed to wall complete all as specified and as directed.

Supply and fixing sink with drainage board made of stain less steel 1mm thick with plugs, washers and wastes pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm including two coats of synthetic enamel paint over coat of primer and connecting union to pipe over all minimum size 915mm x460mm bowel size 410mm x 330mm x160mm complete all as specified and as directed.

Supply and fixing Brass chromium plated shower rose 125mm fixed in repairs complete all as specified and as directed.

Supply and Fixing in repairs brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete.

Supply and fixing PVC shelf 12cm wide and 42 cm long fixed with screws complete all as specified and as directed.

Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.complete all as specified and as directed.

Material and Labour for roughening of surface of old concrete floor, sweeping, clean and washing with water to remove dust complete all as specified and as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for Non skid cerermic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and Labour for Non skid cerermic coloured tiles in skirtings/dado, 7 to 8 mm thick (Square /rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over 10mm thick screed bed in cement mortar (1:3) complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such skriting /dado and over 10mm thick in cement mortar 1:3 as in backing plaster complete all as specified and directed.

Material and Labour for 50 mm thick cement concrete 1:3:6, type C-1,(using 20mm graded crushed stone aggregate) as in plinth protection, path finished even and fair without using extra cement complete all as speciified and as directed.

Dismantling of PVC pipe of 75/100mm dia fixed with cement joint complete all as specified and as directed.

Supply and Fixing PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and Fixing PVC (SWR) 110mm dia mtr bends any radius complete all as specified and as directed.

Supply and Fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Material and Labour for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

Material and Labour for cement concrete type D-2 (1:4:8) with 40mm graded aggregate complete all as specified and as directed.

Material and Labour for cement concrete type E-2 (1:5:10) with 40 mm graded aggregate as in lean concrete complete all as specified and as directed.

Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified and as directed.

Demoliton of mud in roof any thickness including mud plastering and removing debries of the premises where directed complete.

Material and Labour for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified and as directed.

Material and Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to either side including applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all specified and as directed.

Material and Labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM 1:3 complete all as specified and as directed.

All as per Srl item No 80 above /here-in-before but except tiles.Note : (i) Serviceable brick tiles obtained from item No 76 shall be reused after cleaning etc..

Material and Labour for udaipur green marble 16-18mm thick confirming to sample kept in GE 's office ( table rubbed and polished inslab, stair case, step and like jointed with grey cement slurry mixed with pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.

Material and Labour for Rolled Mild Steel in framed work Fe-290 Gde E-165 as in chowkhats, doors of angle or other section etc,complete, drilled for fixing of sheeting to be prepared for hanging/sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed.

Material and Labour for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS-2645 complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete all as directed

Material and Labour for point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed

Item No 87 contd.../- NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately under relevant item.

All as per ser item No. 87 above but for One fan point controlled by one switch & regulator

All as per ser item No. 87 above but for One bell point controlled by one bell push

All as per ser item No. 87 above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for One 5 Amps socket outlet point on same board with other switches/sockets

All as per ser item No. 87 above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for One 3 pin 5 Amps socket outlet on independent board.

All as per ser item No. 87 in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed

Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed

Supply and Fixing Modular bell switch 6 Amp 1 module size complete all as specified and as directed

Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed

Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and as directed.

Supply and Fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as specified and as directed

Supply and Fixing buzzer, Ding Dong, AC, 240 Volts, single pole, fixed over & including pressed steel sunk box of size 175 x 100 mm duly covered with 3mm thick bakelite sheet complete all as specified and as directed

Supply and Fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including 10cm x 10cm presto plastic board for resting to holder including Supply and Fixing 01 x 10/12 watts LED lamp, 230 volts complete all as specified and directed

Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI> 80, PF>95%, THD<10%, Lumen>2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete all as specified and directed.

Supply and Fixing Dusk & dawn roadway luminaries 45 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet of make: Havells or equivalent make of Philips/Crompton, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF>95%, THD<10%, Lumen>4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.

Taking down carefully existing serviceable Ceiling fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose to fan complete all as directed

Supply and Fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, fan hook, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan complete all as specified and directed

Supply and Fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 300mm sweep, with blades and frame and louvers complete of make Havells/Crompton/Orient, fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete all as specified and directed

Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete of make Havells/Crompton/Orient, fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete all as specified and directed

Supply and Fixing of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings (such as elbow, socket, union, male/female threaded socket, etc.) conforming to IS: 15778, having pressure bearing capacity @ 23°C is 28.12kg/cm² & at @ 82°C 7.03kg/cm² complete fixed on walls/ceiling or laying in floors complete all as specified.

Supply and Fixing stop valves of bore dia 20mm, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/CPCV pipe or for unions and fixed complete all as specified and directed.

Supply and Fixing Bib taps, of bore dia 20mm, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified an directed

Supply and Fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed

Item No 111 Contd.../- NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate

Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as directed NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing sub main wiring with 2 runs of 2.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 2.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as directed NOTE: Two runs of 2.5 sqmm copper cable and one run of 2.5 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Material and Labour for loadline distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, complete incl taking down old unsv one from site complete all as directed NOTE: (i) MCB DB & MCBs should be of same make as mentioned above. (ii) Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Supply and Fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 kA including making incoming and outgoing connections complete incl taking down old unsv one from site complete all as specified and as directed

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete all as specified and as directed

Supply and Fixing MCB SPN 32 Amps Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete all as specified and as directed

Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm.

Item no 119 contd..../- PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

Supply and Laying in trenches/drawn through pipes or in road crossings/paths/drains/ ducts/floors/along poles/equipments etc., of LT cable under ground, heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of 25 Sqmm ½ core cross sectional areas including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed. NOTE: Excavation, earthwork, cable protection pipe shall be measured and paid separately

Supply & laying double wall corrugated (DWC) high density poly ethylene (HDPE) of size 40mm dia including all necessary fittings, PN-4 rating, pressure 6 Kgf/cm², conforming to IS-16205 (Part-24) with high ring stiffness & cursh resistance capacity, etc., laid in trench for protection of submersible flat cable complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in soft/loose soil and in road cutting all as specified and as directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil all as specified and as directed

Removing excavated material/surplus soil not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above starting point

ESS KAY BUILDER (BID ID -3303680)

S S CONSTRUCTION COMPANY (BID ID -3309188)

M/s. M Company (BID ID -3309175)

m/s. gopal krishan (BID ID -3303634)

RAJ KAMAL BUILDERS (BID ID -3308967)