Karnataka

Active

Works

Buildings

Repair of room in Govt. High School at Baganakatte village Baganakatte GP Shikaripura tq Shivamogga Dist (Reserved for CAT-2A))

Rural Development and Panchayat Raj Department

RDPR Division Office Sagara | Karnataka

Amount: ₹8.5 LCloses: 3 Oct 20266d left

Timeline

Published25 Sept 2026
Closes3 Oct 2026

Tender Value

₹8.5 L

EMD Value

₹12,500

Closing Date

3 Oct 2026, 5:00 pm6d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

RAVINDRANATH M R

Office Number

Mobile Number

Work Description

Repair of room in Govt. High School at Baganakatte village Baganakatte GP Shikaripura tq Shivamogga Dist (Reserved for CAT-2A))

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28612

Reference Number

RDPR/2026-27/BD/WORK_INDENT28612

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Sagara

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredRegistration Certificate

RequiredAnnual Turnover Certificate

RequiredReserved Category Certificate

RequiredDomicile / Residential Certificate

RequiredGST Registration certificate

RequiredWorkdone Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenders from Joint ventures are not acceptable.

Conditional Tenders will not be accepted.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Contractor Belonging to the Scheduled Castes/Scheduled Tribes, CAT-1 and CAT-2A Casts Shall be Valid Domicile/Residential Certificate of The State of Karnataka For More Than Ten Years

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee (Min Rs.500/- and Max Rs.7500/-) and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. The tender processing fee is not refundable.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal.

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division, Sagar, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module. Contract Management Module For All Bills are Mandatory.

The successful bidder shall pay 500/- for a work value up to 10 lakh, and an additional 500/- for every additional 10 lakh of the work value, subject to a maximum Stamp Duty of 10 lakh.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme

The Employer reserves the right to reject any or all tenders without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderer own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work.

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

As Per Govt Order No: DMG/SG/BUD/KRIDE/2025-26 Dt: 12.11.2025. All the works executing departments shall make it mandatory in their tender document for their contractors to obtain Mineral Dispatch Permit (MDP) from Mines & Geology Department For the use of minor minerals in Government Works. And accordingly, the Additional Chief Secretary/ Principal Secretary / Scretary to the Government of all the Departments shall issue direction to all the Govennment works excuting departments under them . And The same MDP shall be submitted by the contractors along with the bills to the work executing department for proving the payment of Royalty and other fees.

Annual Turnover Certificate From Last Five Years (2021-22-2025-26) For General Works Minimum Two Year Equal To ECV

Annual Turnover Certificate From Last Five Years (2021-22-2025-26) for Category Works Should be Minimum One Year Equal to ECV

For Works Casting Above 20 Lakh, The Bidder Must Submitt Any Nature of Workdone Certificate From Last Five Years (2021-22-2025-26) Equal to 25% of ECV For Category Works

For Works Casting Above 20 Lakh, The Bidder Must Submitt Simillar Nature of of Workdone Certificate From Last Five Years (2021-22-2025-26)Equal to 50% of ECV For General Works

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,500

Important Dates

Last Activity

25 Sept 2026

Published

25 Sept 2026

Download Ends

3 Oct 2026

BOQ Preview

•

Repair of room in Govt. High School at Baganakatte village Baganakatte GP Shikaripura tq Shivamogga Dist (Reserved for CAT-2A))

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing precoated galvanised steel sheet roofing accessories

•

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...

•

Providing and fixing precoated galvanised steel sheet roofing accessories

•

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Floor painting with floor enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remov...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GENERAL CONDITION ENGLISH.docx

Tender Document • 0.02 MB

KW1 BID DOCUMENT Below 20 lakh.docx

Tender Document • 0.07 MB

GENERAL CONDITION KANNADA.docx

Tender Document • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

Repair of room in Govt. High School at Baganakatte village Baganakatte GP Shikaripura tq Shivamogga Dist (Reserved for CAT-2A))

Rural Development and Panchayat Raj Department

RDPR Division Office Sagara | Karnataka

Amount: ₹8.5 LCloses: 3 Oct 20266d left

Timeline

Published25 Sept 2026
Closes3 Oct 2026