Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹24.6 L+₹83,036 (3.49%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹24.7 L+₹89,935 (3.78%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹25.5 L+₹1.7 L (7.13%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹25.7 L+₹1.9 L (7.94%)Rejected-Finance 401 SHRINAT HEIGHTS HADAPSAR ROAD SURVEY NO 97 MANJARI BK HAVELI PUNE 412307 | PUNE | MAHARASHTRA | 412307 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹37.1 L
EMD Value
₹74,200
Closing Date
26 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN-87 OF 2023-24 SPL REPAIRS TO BLDG NO. 19/A SHIVAJI MARG OF SC IS GRP AND MW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE
2024_MES_640011_1
GE(N) P/TOKEN-96 OF 2023-24
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹74,200
Yes
4 Apr 2024
31 Jan 2024
2 Mar 2024
31 Jan 2024
26 Feb 2024
13 Feb 2024
1 Feb 2024 - 6 Feb 2024
Amount
Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.
Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as directed.
Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as directed.
Demolition of Brickwork or stone / block masonry, built in cement mortar dressed stonework and precast concrete articles complete all as specified and directed
Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.
M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6
M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.
Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.
Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc with end of bars shouldered and / or riveted or forged into spike framed guard bars, barred iron doors and similar work conforming to Fe 410-0 or Fe 310-O.
Supply and fix for rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed. .
Mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the othere, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L preparation of old painted wooden surfaces plain or moulded surface of any description over 10 cm girth or width, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and as directed.
Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as directed.
M&L For suspended false ceiling system using T – grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38x24x3600mm cross T 25 x 24 x 60mm/ 25 x 24 x 1200mm and wall angle24 x 24 x 2540mm (thickness of the material of 0.30mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS – 2095, part – I- 1996, fixed in the grid of T – grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specified and directed by Engr-in-charge. Make – Gyproc/ Armstrong
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified
M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base.
M&L for vitrified colour ceramic light shade(double charged) tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for vitrified colour ceramic light shade(double charged) tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in Skirting /dado set & jointed in neat cement slurry & pointed in coloured cement to match including 10 mm thick back coat in CM 1:3 complete all as specified and directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.
M&L glazed ceramic coloured tiles of size 600 x 300 x 7mm / 450 x 300 x 7mm / 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified.
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.
M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge..
M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and directed
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. all as specified.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.
S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. Make : Cera/Prayag/Johnson Pedder.
S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified. Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.
S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified.Make: Jaquar Cat No.VGP-81021N
S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.
S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff.
S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified.
S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as directed by Engr-in-Charge
S&F in repairs hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat No ALE-ESS-585 or of equivalent make as per Appx 'A' as approved by GE
S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE
S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE
S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..
S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified..
S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified..
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..
S&F PVC (SWR) vent cowl of size 110mm bore.
S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fan complete all as specified and directed by Engineer-in-Charge.
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc. 1.5 sq. m but n exc 4 sqm each complete anf refxing again in same opening after complete all as specified and directed
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 65 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S/F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive s/s wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed
S & F Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.
S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.
Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.
S/F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive s/s wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed
S &F in repair Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.
S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F Stainless steel Hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge
S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S & F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S & F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scrapped surface with putty and preparation of surface for further treatment and then applying two coats of Oil bound distemper white or tinted over a coat of primer complete all as specified and dircted by Engr-in -Charge
S&F in repair Drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified.
M&L 75mm thick cement concrete 1:4:8 type D-2 (40mm stone agg) as in Subbase
Material and labour for designer coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description laid in cement mortar complete all as specified and as directed.
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.
Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation.
M&L for Hardcore of stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm size stone agreegate in sub-base of floor.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils.
Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point.
M/L for 15mm thick plaster in CM 1:6 on fair faces of concrete surfaces finished even and smooth w/o using extra cement on internal surfaces of walls preparation of new surfaces of walls and apply two coat of OBD over a coat of primer complete.
S&F for mild steel hollow mild steel section for structural work in round or rectangular tube section as in main and cross beams, hip and jack rafters purlins, colum post where connected to common rafters including MS flat iron wind tiles drilled for fixing , angle cleats or other connecting plates as per IS 4923-1968 complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.
S&F Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat No AEC-1121 or of equivalent make as per Appx 'A' as approved by GE
S&F Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No FUS-29041 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S & F Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx 'A' as approved by GE
Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.
S & F brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE
S/F stainless steel butt hinges 100mm complete all as specified and directed. NOTE:- all screws shall be self tapping chrome plated and length of screws not less 38mm coplete all as directed and specified.
M&L GI tubing 15mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.
M&L GI tubing 20mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.
S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing .
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.
S/F PVC (SWR)vent cowl of size 110mm bore
S/F for glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.
S/F PVC connection 15mm bore with two nuts and washers of PTMT of length 450mm all as specified.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.
M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).
S&F white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.
S&F 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR or equivalent in Plumber/Ess Ess]
S&F Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder.
Supply and fix in repair for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.
Material and labour for cutting into existing manhloes for connecting new drains,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in PCC (1:2:4) type-B-1 , Smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under the haunching against the sides of pipes after they are laid comptete.
S/F for 150mm dia reinforced concrete pipes,class NP-2 laid and jointed complete
S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non-toxic effect, algea formation protection ( made from virgin grade of polyethylene material which is duly stabilized with anti -oxidant plastic) of capacity 1000 litres,(cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth ,clean and free from any hidden internal defects, hoisted and fixed in position incl S&F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples , checknuts & washer , 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high- density plastic ball (Minimum weight 210gms) and 20mm bore brass stop cock , high pressure with crutch or butterfly handle etc all as specified and directed.
18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board etc complete all as specified and directed.
S&F Shelves made of HDHMR board 18 mm thick water proof with life time warranty for anti-termite shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed.
S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed.
Supply and fix for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
Supply and fix for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
Supply and fix for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S/F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe
Supply and fix vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE
Excavation in post holes in soft/ loose soil n.exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm complete all as specified and as directed
M&L for cement concrete in foundation fillingand mass concrete type B- 2 1:2:4 using 40 mm graded aggregate as in foundation
S&F 1 mm thick steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hesp and staple and one shop coat of primer ercted in position as indicated complete push pull or manual type complete all as specified and as directed.
S&F safety lever locks mild steel with 4 lever for rolling shutter complete all as specified and as directed
S&F ball bearing for rolling shutter.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair and provn of sagol finish with two coats of oil bound distemper of any tint over a coat of red oxide including taking down existing plaster all as specified and as directed
S&F for steel door inclunding projecting type hinges, steel handle complete with glazing bars, dovetailed or welded complete all as as specified and as directed
S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock/ strike plate complete as per ISI mark all as specified and as directed
M&L for framed work such as grills, grantings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars barred iron doors ladders, framed balusters walk ways,railings frame work of water tanks and similar works conforming to Fe- 290. Gde E- 165.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.
One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
Description all as per 143 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.
S & F in Repair for Decorative wall mounted luminaire with opal glass with nickle finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , HALONIX HLWB-05-E27 or its equivalent in Philips.
S/F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.
Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.
S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
Supply and fix garden light 20 Watts with all connections all as directed by Engineer in charge
Supply and fix Gate light 40 Watts with all connections all as directed by Engineer in charge
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
M&L for taking down indoor unit of split AC 1.5 TR/ 2 TR carefully including disconnecting all electrical connections & removal of copper tubing and refixing the same after completetion of painting of walls including topping up F-22 or R-134(a) gas as required quantity all as specified and as directed by Engr-In-Charge.
Supply and fix for sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER
Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of 20 mm size.
M&L for straight plain brass ferrule (or connecting screw) screwed both ends and fixed suitable for 20 mm bore GI water tubing for tapping on line existing pipe line complete all as specified and directed
Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.
Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size.10 Sq mm 2 Core
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/S Eknath agencies
Gauri Associates
R k construction
GS Associates
Sai Construction
AJINKYA VIKRAM GAIKWAD
THE SAIRAM CONSTRUCTIONS
K.K.Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .