REPAIR TO LEAKAGE, SEEPAGE IN TOILETS AND TILING ,TRAVERSE WALL AND MISC ITEMS IN TECHNICAL AREA AT AF STN JAISALMER

Amount

Dismantling floor, hearth or wall tiling or stone partitions including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises complete all as specified and directed.

Glazed coloured ceramic tiles in dado/skirting 300x450x6-7mm / 350mm x250mm x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile 400 x 400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 20mm thick black granite slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for 20mm thick black granite slabs/Tiles laid in Wall surfaceover 15mm thick rendering in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified and directed.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement mortar 1:6 complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

PCC (1:3:6) TYPE C1 (using 20mm graded stone aggregate) as in coping and other similar bands incl weathering, slightly rounded or chamfered, angles and waste of form work throating as directed incl necessary form work complete all as specified and directed.

Hammer dressing to face stones with maximum depression on face from a straight edge n exc 20 mm and dressing face beds and joints as specified to rubble walling Jodhpur Type brought up to squared course complete all as specified and directed.

Key pointing to squared rubble masonry brought upto courses in CM (1:4) complete all as specified and directed.

Dismantling of existing water proofing roof treatment any type, and in any location up to existing RCC Slab by Chiesling, drilling, scraping and any description and in any position all as specified and directed by Engineer-in-Charge .

M&L Cutting grooves in brick / stone masonary wall, for inserting APP membrane 75mm wide and 65mm deep and making good / shaping horizontal face of groove with cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.

M&L for Cement concrete 1:2:4 as in padding etc complete all as specified and directed.

M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over bituminious primer complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified.

Dismantling water tanks, capacity exc 250 & n.exc 500 ltrs complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage triple layer white tanks (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 20 mm dia ball valve ,high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium wt-210 gms) complete all as specified and directed.

Demolition and beaking up drain pipes upto 100mm internal dia of pipe (SGSW,AC or RCC) set in cement mortor etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any lenghts with rubber vring joints, laid in trenches or in floors etc complete all as specified and directed.

Ditto all as in Sl Item No 24 above but fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any lenghts with rubber vring joints, laid in trenches or in floors etc complete all as specified and directed.

Ditto all as in Sl Item No 26 above but fixed to walls complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius etc complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius provided with access door etc complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius etc complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) junction single(Single T) equal or unequal provided with access door etc complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) vent cowl etc complete all as specified and directed.

S&F in repair 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement & jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etccomplete all as specified and directed.

S&F SFRC manhole covers with rectangular frame of size 44'' x 26'' M-10 fixed at site upto satisfaction of Engr-in-charge and including dismentling of old manhole cover slab complete all as specified and directed.

S&F SFRC manhole covers with rectangular frame of size 22'' x 28'' M-10 fixed at site upto satisfaction of Engr-in-charge and including dismentling of old manhole cover slab complete all as specified and directed.

S & F in repair vitreous China wash basin white flat back size 550x400mm including 40x40x5mm angle iron brackets with paint including cutting for and pinning in ends of brackets , CP pillar tap fancy type copper alloy wiith capsten handil scrubbed down high pressure screbbed shanks and fly nuts screwed for iron pipe15mm dia, PVC conection 450mm long with PTMT nuts high presure , brass PTMT waste coupling 32 mm dia with long dcrewrd shanks and fly nuts etc complete all as specified and directed.

S&F in repair vitreous china EWC, with `P' trap, colour white, with 10ltr low level cisten (LLC) including internal fitting (including fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) with 40mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flange end bedded in red lead complete all as specified and directed.

S&F in repair 32mm bore of pipe low density polythylene pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 40mm bore of pipe low density polythylene pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 88mm over head shower premium quality square with 225mm SS arm & glange etc as specified by Engineer-in-Charge.

M&L for 20mm thick green marble both sides polished as in urinal partitions of sizes as approved inluding cutting chases in walls and setting in neat cement paste etc complete all as specified and directed.

Taking down GI Pipe any grade 15mm bore of pipe etccomplete all as specified and directed.

Taking down GI Pipe any grade 20mm bore of pipe etc complete all as specified and directed.

S&F 15mm bore of tube steel water tubing medium grade galvanized with all fittings and fixtures fixed complete to walls, ceilings or laid on floors etc complete all as specified and directed.

S&F 20mm bore of tube steel water tubing medium grade galvanized with all fittings and fixtures fixed complete to walls, ceilings or laid on floors etc complete all as specified and directed.

S & F in repairs 15mm bore of pipe fancy type premium quality chromium plated stop cock cast copper alloy, screwed doen, high pressure, screwed bith ends for iron pipe or for unions ,with long shank and cup (concealed type) etc complete all as specified and directed.

S&F in repair 15mm bore of pipe fancy premium quality type chromium plated bib taps 1cast copper alloy with crutch or butterfly handle, screwed down etc complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc.complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on stone masonry or other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 10mm thick on Wall & bottom of SWT of any description in cement mortar (1:6) using WPT & to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finiched even and smooth with out using extra cement complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall surface complete all as specified and directed.

M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified and directed.

M&L for preparation of new treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying two of exterior emulsion paint (weather coat) over one coat primer 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified and directed.

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified and directed.

M&L for prepration of new surface plastered and applying three coats of White washing on walls of SWT, ceiling,soffits of chajjas/drop & roof projection facia etc complete all as specified and directed.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer as approved complete all as specified and directed.

M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified and directed.

M&L for preparation of old treated/decorated external wall surfaces of any storeys / height upto 10m and applying one coat of cement based paint in different tints in sigma/camouflage pattern as approved complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube 19mmx19mmx19 gauge & PDM rubber gasket wealther seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15x15mmx15 gaughe MS square tube inside the 19mmx15mm MS square tube and suitably screwed complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified and directed.

S&F 30mm th flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F wood grain printed 1mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other sectionwith gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W (Gde E-250 Quality B) complete all as specified and directed.

S&F 100 mm long stainless steel Butt hinges complete all as specified and directed.

S&F aluminium alloy, anodised, 250mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded msections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 125mm size complete all as specified and directed.

Easing and adjusting of steel door/ window/ventilators incl removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.

Easing and adjusting of wooden door/ windows complete all as specified and directed.

Easing and adjusting of aluminium door/window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.

Demolition of reinforced cement concrete of any descrpritpion and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L RCC (NOMINAL MIX) Type B1 1:2:4 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L RCC (NOMINAL MIX) Type B1 1:2:4 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC (NOMINAL MIX) Type B1 1:2:4 using 20mm graded stone aggregate as in chajjas, fins, fascias, louvers, parapets and railing etc and the like complete all as specified and directed.

Galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat surfaces (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed.

M&L for mild steel deforming bar 10 mm dia and over cut to shape required including cranking bending spirally for hooking end and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item above but 6 to 8 mm dia complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5m high from base including supply of approved earth obtained from Air Force campus or from with Air Force station if approved including excavation and carrying to work site and including surface dressing not exceeding 15cm deep and cleaning away all grass, vegetation, saplings, shrubs, bush wood under growth roots, soft/loose soil etc and removing the same etc complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., exceeding 1.5m but not exceeding 3.00m high from base including supply of approved earth obtained from outside MD land/Air Force campus or from with Air Force station if approved including excavation and carrying to work site and including surface dressing not exceeding 15cm deep and cleaning away all grass, vegetation, saplings, shrubs, bush wood under growth roots, soft/loose soil etc and removing the same etc complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., exceeding 3m but not exceeding 4.5m high from base including supply of approved earth obtained from outside MD land/Air Force campus or from with Air Force station if approved including excavation and carrying to work site and including surface dressing not exceeding 15cm deep and cleaning away all grass, vegetation, saplings, shrubs, bush wood under growth roots, soft/loose soil etc and removing the same etc complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., exceeding 4.5 but not exceeding 6.00m high from base including supply of approved earth obtained from outside MD land/Air Force campus or from with Air Force station if approved including excavation and carrying to work site and including surface dressing not exceeding 15cm deep and cleaning away all grass, vegetation, saplings, shrubs, bush wood under growth roots, soft/loose soil etc and removing the same etc complete all as specified and directed.

Removing the demolished material / rubish & cleaning of site etc as directed by Engineer-in -Charge.

M/s Sati Jasnath Enterprises

M/S MAYA CONSTRUCTION COMPANY

MARUDHARA CONSTRUCTION COMPANY

deepaktraders

M/S R B CONSTRUCTIONS

M/S VISHNOI ENTERPRISES