Himachal

Financial Eval

Works

Civil Works - Buildings

Balance Work for the Construction of 2 No Type-II Quarter Veterinary Department at Purthi

New Financial Bid Opening Date Corrigendum corrigendum available.

Public Works Department

Killar | Chamba, Himachal Pradesh

Amount: ₹63.4 LCloses: 20 Apr 2026Closed

Timeline

Published14 Apr 2026
Closed20 Apr 2026
Technical Evaluation22 Jun 2026
Financial Evaluation10 Jul 2026
Award—

Bids

Percentage

4 Bids10 Jul 2026

#	Company	Amount	Rank	Status
1	Deepak Sharma L1₹53.3 LAccepted-Finance HIMACHAL PRADESH HP	₹53.3 L	L1	Accepted-Finance L1
2	DEENA NATH L2₹55.5 L+₹2.3 L (4.29%)Rejected-Finance R O VILLAGE AJOG P O PURTHI TEHSIL PANGI DISTT CHAMBA HP \| CHAMBA \| HIMACHAL PRADESH \| 176207	₹55.5 L+₹2.3 L (4.29%)	L2	Rejected-Finance L2
3	Sajjal Negi L3₹61.4 L+₹8.1 L (15.2%)Rejected-Finance	₹61.4 L+₹8.1 L (15.2%)	L3	Rejected-Finance L3
4	SATISH KUMAR SHARMA Rejected-Technical HOUSE NO 114 WARD NO 1 KRISHNA NAGAR TEH AND DISTT HAMIRPUR H P	-	-	Rejected-Technical NON RESPONSIVE

Tender Value

₹63.4 L

EMD Value

₹1.3 L

Closing Date

20 Apr 2026, 11:00 amClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER KILLAR DIVISION HPPWD KILLAR

Address

EXECUTIVE ENGINEER KILLAR DIVISION HPPWD KILLAR

Work Description

Construction of Building Portion, Water Supply and Sanitary Installation, C/O Septic Tank and Soak Pit and C/O Boundary Wall and Gate and Side Wall in Random Rubble Masonry

Tender Information

Tender ID

2026_PWD_134289_1

Reference Number

KILLAR DIVISION

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

547 days

Location

Killar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredCost of Online receipt of EMD and cost of form under general rule 24.1 (.pdf)

RequiredScanned copy of Registration/Enlistment Employee Provident fund Number registration. (.pdf)

RequiredScanned copy of work done certificate in last five years under general rule 26.2 (.pdf)

RequiredScanned copy of Permanent account number, GST Registration, GST clearance certificate. and Income T (.pdf)

RequiredLIST OF MACHINERY TOOL and PLANT (only if required in tender document) and staff under general rule (.pdf)

RequiredReport of charted Accountant showing total annual volume in last five year (Ref. General Rule 26.2a (.pdf)

RequiredForm of bid as specified in Section-7/8 duly signed by contractor (.pdf)

RequiredAn affidavit that information furnished with the bid (Name of work) is correct in all respect and wo (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

10 Jul 2026

Published

14 Apr 2026

Bid Opening

20 Apr 2026

Download Starts

14 Apr 2026

Download Ends

20 Apr 2026

Submission Starts

14 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (165 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1.01	Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.	-	Per Cubic metre	-	-
1.02	Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.	-	Per square Metre	-	-
1.03	Centering and shuttering including strutting, propping etc. and removal of form for foundation, footing, basis of columns etcetra and mass concrete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.	-	Per square Metre	-	-
1.04	Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.	-	Per square Metre	-	-
1.05	Centering and shuttering including strutting, propping etc. and removal of form for stair cases with slopping or stepped soffit including riser and stringers excluding landing floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.	-	Per square Metre	-	-
1.06	Centering and shuttering including strutting, propping etc. and removal of form for Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.	-	Per square Metre	-	-
1.07	Centering and shuttering including strutting, propping etc. and removal of form for vertical and horizontal fins individually or forming box louvers band, facias and eaves board including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.	-	Per square Metre	-	-
1.08	Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls upto all width and heights including all taxes,GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.	-	Per Running metre	-	-
1.09	Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.	-	Per Cubic metre	-	-
1.1	Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm(Teenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement for RCC work in:- Foundation footings bases of columns and the like and mass concrete including all leads and lifts.as per HPPWD specifications,approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.	-	Per Cubic metre	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.16 MB

Work Item Documents

DNIT.pdf

Tender Documents • 3.39 MB

BOQ_198583.xls

BOQ • 0.46 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Deepak Sharma

L1₹53.3 LAccepted-Finance

HIMACHAL PRADESH HP

DEENA NATH

L2₹55.5 L+₹2.3 L (4.29%)Rejected-Finance

R O VILLAGE AJOG P O PURTHI TEHSIL PANGI DISTT CHAMBA HP | CHAMBA | HIMACHAL PRADESH | 176207

Sajjal Negi

L3₹61.4 L+₹8.1 L (15.2%)Rejected-Finance

SATISH KUMAR SHARMA

Rejected-Technical

HOUSE NO 114 WARD NO 1 KRISHNA NAGAR TEH AND DISTT HAMIRPUR H P

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1.01

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Per Cubic metre

1.02

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Per square Metre

1.03

Centering and shuttering including strutting, propping etc. and removal of form for foundation, footing, basis of columns etcetra and mass concrete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Per square Metre

1.04

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Per square Metre

1.05

Centering and shuttering including strutting, propping etc. and removal of form for stair cases with slopping or stepped soffit including riser and stringers excluding landing floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Per square Metre

1.06

Centering and shuttering including strutting, propping etc. and removal of form for Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Per square Metre

1.07

Centering and shuttering including strutting, propping etc. and removal of form for vertical and horizontal fins individually or forming box louvers band, facias and eaves board including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Per square Metre

1.08

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls upto all width and heights including all taxes,GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Per Running metre

1.09

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Per Cubic metre

1.1

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm(Teenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement for RCC work in:- Foundation footings bases of columns and the like and mass concrete including all leads and lifts.as per HPPWD specifications,approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Per Cubic metre