Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.6 LAccepted-AOC 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹16.7 L+₹9,812.50 (0.59%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹19.2 L+₹2.6 L (15.7%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹19.8 L+₹3.2 L (19.2%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹20.6 L+₹4.0 L (24.3%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
18 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
REPAIR TO MISC WORKS TO OTM/ MARRIED ACCN IN NEW PINTO PARK (BASANT NAGAR) AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_590482_1
GENP-13/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹50,000
Yes
9 Aug 2023
20 Apr 2023
19 May 2023
20 Apr 2023
18 May 2023
5 May 2023
Amount
Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land.
Demolition of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any cement mortar including removing the debris from site to outside MoD land.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removing the debris from site to outside MoD land.
Taking down cement or cement lime plaster on brick/ stone or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc upto 4th storey building including removing the debris from site to outside MoD land.
M & L for gunniting work to RCC beam, column, lintel, pardi, railing, slabs, side walls etc by removing loose, disturbed or disintegrated old concrete surfaces, cleaning thoroughly exposed reinforcement by sand blasting using suitable pump and applying one coat of anti corrosive paint to the exposed reinforcement, S&F welded wire mesh fabric or wire net of size 100mm x 100 mm x 3 mm dia of weight not less than 1.37 Kg/Sqm and tied to existing reinforcement with 22 guage mild steel (annealed) binding wire and applying gunniting pressure 2.00/ 2.50 Kg/Sqm with admixture 1 part of cement and 3 part of sand with average thickness 40mm and making the surface even including rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound @2% by weight of cement on concrete surface including finishing the surfaces even and smooth without using extra cement upto G+3 storey building and providing necessary scaffolding and safety arrangement including removing the debris from site to outside MoD land complete all as specified and directed. (Note :- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately as supply only).
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but with water proofing compound by weight as per manufacturer's instructions for bldgs upto 24 mtrs height including necessary scaffolding and safety arrangements. (Note : WPC will be measured and paid separately).
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing surface even and smooth without using extra cement .
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 including finishing surface even and smooth without using extra cement .
M&L for preparing plastered or unplastered new surfaces in ceiling and applying three coats of white wash complete.
M&L for preparing plastered or unplastered old surfaces in ceiling including brooming down or steel wire brushing, scraping down etc and applying two coats of white wash all as specified.
M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkalic resistent primer all as specified.
M & L for two coats of cement base paint of approved colour and shade after preparation of newly plastered surfaces of wall complete.
M&L for complete removal of existing treatment on plastered or unplastered old decorated surface of walls and applying two coats of oil bound distemper over a coat of wall primer over 1 mm thick wall care putty all as specified and directed.
M&L for preparation of old decorated surface of walls by brooming down or with steel wire brushing, scrapping down smoke, soot's moulds, moss efflorescent salts and trading oil, greasy spots and filling cracks/holes by wall care putty and applying one coat cement base paint all as specified and directed.
M&L for cleaning of PVC over head service tank of capacity exc 500 ltrs but not exc1000 ltrs by brooming ,removing all dirt ,vegetation grown on roof ,around tank if any, washing the tank with approved bleaching powder rendering it clean to store potable water after applying two coats lime wash internally including writing the date of cleaning and capacity of tank with white synthetic enamel paint (letters not exc 30 cm height) on the outlet surface directly visible all as specified and as directed.
All as per Item No. 16 above but tank of capacity exc 250 and not exc 500 liters.
M & L for machine cut Kota stone slab flooring 20 to 25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing laid on 20 mm thick screed bed in cement moratr 1:4 all as specified and as directed.
M&L for 18-20mm thick granite work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement moratr 1:4 and making exposed edges to half round complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing including removing the debris from site to outside MoD land.
M&L for joint free non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile not exc 0.11sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:6.
M&L for joint free non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:6.
All as per item No 22 above but in skirtings laid over 10mm thick cement plaster in CM 1:4.
M&L for joint free coloured glazed ceramic tiles as in vertical surfaces of size 300x200x7mm/ 450x300x7mm thick first quality, set and jointed in cement slurry and pointed in white or coloured cement to match the tiles laid over & including 15mm thick rendering in cement mortar 1:4 all as directed and specified.
M&L for vitrified tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6.
All as per item No 25 above but on vertical surface of wall, dado, skirting etc including 10 mm thick rendering in cement mortar 1: 4.
S& F for factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over 50 mm thick sand cushioning.
S& F for factory made pre-polished chequered cement concrete tiles 300mm x300mm x 25 mm thick, set jointed and pointed in neat cement slurry with gray cement and pigment as in floors including 20 mm thick screed bed in cement mortar 1:4 complete.
Demolition of cement concrete (un reinforced) in roof, staircase landing ,floors (other than ground floor) including removing the debris from site to outside MoD land.
Taking down existing tarfelt including plaster complete all as specified and directed.
M&L for 50mm thick (average thickness) cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in roof padding to maintain slope all as specified and directed by Engineer-in-Charge.
M&L for preparation of surface including cleaning of all dirt and providing the following water proofing treatment as in RCC roof, narrow width over the roof gutter of stores, chajjah/canopy/parapet wall etc for G+3 storied buildings accessible / non accessible roof .:- (a) Cement plaster/ screed bed 10mm thick in cement mortar 1:4 on concrete surfaces using WPC @3% by weight of cement including finished even and smooth surface without using extra cement. (b) Cleaning of surface throughly by wire brushed, washed, dried up properly etc and applying evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over plastered surface. (c) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (d) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (e) Membrane bonded completely to the substrate & overlaps are then scaled/fused by flame all as directed. (Note : (i) Water ponding test atleast for 72 Hours shall be carried out after final layer of roof treatment by the contractor. (ii) The contractor shall submit 10 years warranty against the roof treatment and security deposit @ 2% for 10 years from the date of completion of work. (iii) The contractor shall submit test certificate of APP Membrane (iv) The work shall be carried out by authorised applicator of manufacturer.)
M&L for factory made cement concrete tiles 250mm x 250mm x 25mm thick, machine pressed, set & pointed in neat cement slurry with grey cement and no pigment on roof over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified
Taking down shutter of any discription area exc 1 Sqm but not exc 2 Sqm each.
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area not exceeding 1.5 Sqm each.
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area exc 1.5 Sqm but not exc 4 Sqm each.
S&F for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to grade Fe-290 Gde-E-165 including welding hold fast, hinges etc to frame all as specified.
S&F for 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete.
S&F for 35 mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats of second class hard wood.
M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
S&F for butt hinges, stainless steel, ISI Marked 100mm size.
S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or steel frames complete.
S&F for aluminium sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long.
S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size.
S&F for extruded aluminium alloy handles, fabricated type, 100 mm size.
S&F aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size.
S&F for stainless steel door stopper 150mm long with double legged rubber bushes at the end complete.
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey all as specified and as directed.
S&F for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey building.
S&F for figured glass, pin head type, 3mm thick glazing with oil putty in square not exc 0.50 Sqm each panes upto 4th storey building.
S&F in repair mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames.
S & F for steel window with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed
M&L for rubber beading of 50x15mm size for fixing as in door cills and similar situation including necessary drilling/cutting complete.
S&F in repair 20mm dia aluminium drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete.
M&L for preparation of newly surfaces of wood and wood based material of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of newly surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
M&L for 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Taking down of aluminium doors of any type and description and re-fixing in same opening after necessary repairing such as floor spring, locks, hinges, glass, rubber beading, handles, tower bolts etc complete all as specified and as directed. (Note : Cost of screws, misc items shall be included in the quoted rate).
Taking down carefully existing aluminium sliding/openable window shutters, taking out of existing broken glass including existing rubber gasket complete and S&F 4 mm thick plain sheet glass with provision of new rubber gasket and re-fixing the shutters in existing position complete all as specified.
Taking down carefully existing aluminium sliding /openable window shutters, taking out of existing unserveciable stainless steel wire mesh complete and S&F stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of "U" clip and then re-fixing the shutters in existing position complete all as specified and directed.
Taking down carefully aluminium sliding window shutters from the frames and S&F new locking arrangement in place of old one and then re-fixing the same shuters in existing position etc complete all as specified and directed
M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base including use of necessary form work.
M&L for hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.
Demolition of cement concrete (un reinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) including removing the debris from site to outside MoD land.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding and safety arrangements. (Note : WPC will be measured and paid separately).
M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm including cleaning surfaces complete all as specified.
M&L for cement concrete 1:5:10 type E-2 (40mm graded crushed stone aggregate) as in foundations, mass concrete and filling in sunken floor all as specified.
M&L for 25mm thick cement concrete 1:2:4, type B-1, (20mm graded stone aggregate) as in sub floor all as specified and directed.
S&F in repairs vitreous china squatting pan 'Orissa' pattern, size 580mm X 440mm, white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper including flush pipe complete all as specified and directed
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete.
S&F in repair cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete.
M&L for preparation of old painted surfaces of wood & wood based surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint.
M&L for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint.
Taking up or down 15mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified.
Taking up or down 20mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified
M&L for GI tubing 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
M&L for GI tubing 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
Refixing old 15 mm bore GI steel tubing and connections in new or old position (walls, ceiling, floors, etc),including necessary new fittings complete.
Refixing old steel tubing and connections 20 mm bore, in new or old position (walls, ceiling, floors, etc),including necessary new fittings complete.
S& F in repair 15 mm dia stop valve, cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for union and fixed .
S&F in repair 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all specified.
S&F in repair 15 mm dia bib tap, chromium plated, fancy type, long body screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair stainless steel kitchen sink made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 495X420mm bowl size 410X330X160mm all as specified..
S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed Cat Part-No : 563 of Jaquar or its equivalent in kohler/ Marc.
S/F in repair 15 mm angle valve, chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange all as specified. Make: CON-059KN of Jaquar or its equivalent in kohler/ Marc.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm.
Dismantling water tank of capacity exc. 250 ltr and not exc. 500 ltrs complete.
M &L for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified.
Dismantling water tank of capacity exc. 500 ltr and not exc. 1000 ltrs complete.
M &L for 1000 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified.
S&F for ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight-142 gms)
S&F for ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight-210 gms)
S&F in repair wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer complete to walls all specified.
S&F in replacement of 75mm bore cast iron (sand cast) waste and vent pipe in any length with or without ears fixed to walls with cement joints including suitable clamps after every one mtr of interval all as specified.
S&F in replacement of 100mm bore cast iron (sand cast) waste and vent pipe in any length with or without ears fixed to walls with cement joints including suitable clamps after every one mtr of interval all as specified.
S & F in repair cast iron bends (any radius ), diminishing pieces or tapers of 100 mm bore fitted with oval access door complete.
S&F in repair 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 75mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair cast iron cowl of 100 mm bore.
S&F in repair for cast iron 'P' trap 100mm bore.
S&F in repair cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete all as specified.
S&F in repair aluminium (die cast body) hydraulically door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg.
S&F in replacement of 40mm thick precast cement concrete louvres and jallies type B-0, 1:2:4 (12.5mm graded stone aggregate) including all mouldings but excluding frame and set in cement mortar 1:6 including removing the debris from site to outside MoD land.
Demolition of reinforced concrete in shelves, slabs etc not exc 15 cm thickness of any description and in any position including removing the debris from site to outside MoD land.
Dismantling wrought iron or mild steel works of any description all as specified and directed.
M&L for precast cement concrete 1:2:4, type B-1 (20mm graded stone aggregates) as in landing, cover slab,shelves troughs and the like including weathering, slightly, rounded or chamfered angles and throating as directed.
M& L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Suppy only integral water proofing compound.
Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth for foundation, manhole etc or not exc 10 Sqm on plan and not exc 1.5 metre in depth and getting out in soft/loose soil,
Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified.
Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point.
M&L for cleaning of salt glazed stone ware pipe lines of 150 mm bore pipe and removing the blockage by means of rodding with and including bamboo splits/flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to manhole, rendering the system clear and flushing the delogged line with sufficient quantity of water and removing sludge/waste material etc from site to outside MoD land all as specified and directed by the Engr-in-Charge
All as per item No 120 above but line of 200 mm bore.
M&L for cleaning of manholes not exc 1.0 mtr deep and removing sludge/waste materials etc from site to outside MoD land all as specified and directed by the Engr-in-Charge
All as per item No 123 above but exceeding 1.0 Mtr and not exc 1.5m depth.
All as per item No 123 above but exceeding 1.5 Mtr and not exc 2.5m depth.
Cleaning of blocked floor/Nahani trap and CI pipe upto 1st manhole and removing all silt, residue sludge both organic and in organic nature including any type of foreign materials and removing waste materials/ sludge etc to a distance exceeding 50 mtr and sealing the sides of traps in bath room/kitchen using Aqua TS of Aqua shield water proofing or equivalent, any damage caused during cleaning shall be made good by contractor to the entire satisfaction of Enginner-in-Charge.
Cleaning of blocked WC trap and CI pipe upto 1st manhole and removing all silt, residdue sludge both organic and in organic nature including any type of foreign materials and removing waste materials/ sludge etcfrom site to outside MoD land all as specified and directed by the Engr-in-Charge
Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar of 150 mm internal dia all as specified and as directed.
All as per item No 127 above but 200 mm bore.
M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars.
M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars.
M&L for concrete bed to drain pipes of 150mm bore in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested.
M&L for concrete bed to drain pipes of 200mm bore in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain and manholes complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching, coping including necessary form work complete all as specified and as directed.
GIR RAJ BUILDERS
JAIPAL AND BROTHERS
M/S Parshant Associates
Mahesh Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .