Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.4 L+₹3.0 L (8.13%)Rejected-Finance RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹41.5 L+₹4.1 L (11.0%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹42.2 L+₹4.8 L (12.8%)Rejected-Finance | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹43.9 L+₹6.5 L (17.3%)Rejected-Finance | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT10
GE WEST DELHI CANTT10
ADDN ALTN OF BLDG NO T71 T72 T73 T 74 NEAR SEKHAWATI LINE UNDER GE WEST DELHI CANTT10
2023_MES_587093_1
GE/DW-66/2023-24
Open Tender
Civil Works
Item Rate
90 days
DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST DELHI CANTT
₹87,360
13 Jul 2023
3 Jun 2023
24 Jun 2023
3 Jun 2023
22 Jun 2023
17 Jun 2023
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as spd & directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed.
Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) all as spd & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd & directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as spd & directed.
Complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface and raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as spd & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed.
All as per item No. 7 above but n. exc 1.5 sq. m each.
S&F pre-painted galvatume aluminium zinc coated GI based corrugated(150 GSM) steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed.
S&F Pre-painted galvatume aluminium zinc coated GI based(150GSM) plain machine moulded profile ridge steel sheet ridge 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws complete all as spd and directed.
S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type complete all as spd & directed..
M&L for brick work with sub class 'B' old size bricks in CM 1:6, straight or curved on plan exc 6 m mean radius complete all as spd & directed.
M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates in roof parapet coping, roof kerb or mud slops and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as spd and directed.
M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed.
M&L for 15mm thick screed bedding layer in CM 1:6 for laying floor finishes complete all as spd & directed.
M&L for 9 to 10mm thick Virified Ceramic tiles (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd & directed.
M&L for 7 to 8mm thick Glazed ceramic coloured tiles in vertical surface area of each tiles exceeding 0.11 sqm but not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing in CM 1:4 complete all as specified and as directed.
M&L for rendering 12-15mm thick ready mixed plaster on any type brick work or concrete surfaces complete all as spd & directed.
M&L for providing not exceeding 1mm thick wall care putty on wall surface exterior/interior grade complete all as spd & directed.
M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed.
Material & Labour for applying and finishing walls surface with two or more coats of Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer complete all as spd & directed.
M&L for Finishing walls with textured exterior paint of required shade : (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as spd & directed.
Dismantling framed timber scantlings any size in section, in any position (as in purlins etc) complete all as spd & directed.
M&L for Steel work in tubular trusses of squar/rectangular hollow section including special shaped washer, cleats, plates etc. complete conforming to I.S complete all as spd & directed.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spd & directed.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as spd & directed.
M&L for preparation of old steel surface and applying two coat of synthetic enamel paint on roof truss surface and similar work complete all as specified and directed.
M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,(handles 2 Nos in each door, 15mm aluminium hinges-3 Nos each door, 15mm Aluminium tower bolt 02 Nos each door), anodised aluminum snap beading screws etc. complete all as specified.
S&F powder coated (minium thickness of powder coating 50 micron) aluminium section for shutters suitable for three/four track window and aluminium section weighting more than 0.5 kg/m of sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.
M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.
S&F aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as spd & directed.
S&F for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd & directed.
Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.
Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-(a) One light/fan/Exhaust fan/bell point controlled by one switch.
(b) All as per item No. 37 (a) here in before but for One 5 Amp socket out let independent.
(c) All as per item No. 37 (a) here in before but for One 5 Amp socket out let on same board
Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board
S&F switch Piano flush type SP, one way 5 Amps complete all as specified and directed.
S&F switch Piano flush type SP, one way 15 Amps complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5 Amps. complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type complete all as specified and directed.
S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed.
Supply and fixing LED FLAT PANAL Aesthetically designed 2x2 for surface mounting which provides soft-light and glare free symmetrical illumination 34 W complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete complete all as specified and directed.
S&F single pole MCB 6 to 32Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.
S&F of SPN 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 all as specified.
S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. Make: Legrand cat part No:507758
S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.
S&F Exhaust fan metallic type ventilating single phase 230/240V of 300mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.
Supply and fixing PVC Fresh Air exhaust fan 250 mm single phase, 230/240 V With Louvre including cutting of holes in a round shape (Precast piece to be incorporated for smooth and ever finish) complete all as specified.
S&F of electric storage water heater of capacity 25 ltr BEE 5 star with vtreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing after repair work, including new down rods of suitable length as required at site, complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
Deduct Credit: for demolished/dismantled material of (-) Rs 140704.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
HANUMAN BUILDERS
Vipul Construction
M/S Davinder Kumar
M/S Yamin
CHOPRA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .