Providing Street Lights Poles With LED Light fitting At Aircraft Division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

PAN No.:

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs:

Please Enter Turn over in Rupees for all the 3 years

Details of Registered Contractor

ESI No.:

GST Detail:

Please Enter GST Details

Related Document to be uploaded in ePortal

Contact details

Please Enter Contact person Name

Please Enter Mobile No

Valid Electrical contractor license of appropriate voltage (Minimum 650V) issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.

Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II

work done

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III

Details of person holding the power of Attorney :

Related Document to be Uploaded to eProcurement Portal

Please Enter Details for Person holding Power of Attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

Subject tender has been called on item rate basis. Basic Rate to be quoted for each item.

Subject work is a Works contract and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Specification of item

Supply, fixing on existing foundation, installation, testing and commissioning of 7 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter with single arm bracket of 1500mm. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement inside the pole to terminate incoming and outgoing cable of size 2runs of 4C x 10sq.mm Aluminium cable and 3Cx1.5Sqmm flexible copper cable for fitting connection . Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:1)Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2)Civil works for the Foundation will be measured seperately at BOQ Sl.No.12. 3) All cables will be measured separately.

Supply, fixing on existing pole using suitable fixing hardwares and testing & commissioning of Street light LED light fixture of wattage not exceeding 70watts and lumens output not less than 7700lumens with necessary interconnections consisting of pressure die cast aluminum housing with powder coated paint, optical lenses suitable for heat resistance polycarbonate/ PMMA with IP66, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K+5%, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-chage. The luminaire shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.9. The fitting shall have internal surge protection of 4KV and external surge protection of 10KV. LM 79 certification for luminare & LM80 certificate for LED shall be produced. LED used in the luminaire should be one of approved make as per approved make list of HAL. Make/model of Street light LED fixture: Bajaj ENXT P 84L WH PO PC SD or Equivalent model of other approved makes.

Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 4Cx10 Sqmm PVC/XLPE, insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed and as per technical specification.

Supply and connecting indoor type cable end joints suitable for 4Cx10Sqmm LT cable of 1.1 KV gr., Aluminum conductor PVC/XLPE insulated armoured LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects.

Supply, drawing inside the Pole of 3Cx1.5 sqmm 1100V gr. PVC insulated unarmoured copper Cable and connecting from connector using necessary lugs, upto the light fixture complete in all respects. (for connecting the light fixtures from connector inside pole).

Carrying out Mechanized Horizontal directional drilling of soil under the existing road/gate way for drawing 1run of 50mm dia HDPE pipe including supply and drawing 1 run of 50mm dia PE100 PN08 HDPE pipes ,ISI marked conforming to IS 4984:1995 including suitable jointing using welding as required, providing pull tapes in the laid HDPE pipe, ends brought out, the brought out ends shall be sealed with suitable material to prevent soil and water entry and buried under soil. A cement concrete route marker shall be grouted in the soil above both the end of pipes with mark "End of pipes 1Rx50mm". The work includes making suitable access pits, closing the pits and making good damages as original etc complete as directed by Engineer in charge.

Supply and laying of 50mm dia, PE-100, PN8 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge.

TIMER PANEL

1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.

1No- 32A 230V gr.10KA 4P MCB with overload and short circuit protection.

1No-25A, ML1.5 contactor of L&T Cat.No.SS91851 with contactor coil suitable for 230V Single phase supply.

3Nos, 6-32A, 230V Gr, 10KA SP MCB with overload and shortcircuit protection.

Excavation in all types of soil for Cable trench & refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge.

Concrete cutting/Chipping the existing 1:2:4 cement concrete road /pavements/Bitumen Road / flooring including removing debris from the work site as directed by the Engineer-in-charge.

Re-concreting the cut portion with 1:2:4 cement concrete by employing 20mm graded aggregate granite, smooth finish including curing, complete in all respects and as directed.

Supply & providing of 1:2:4 cement concrete pedestal for erection of pole of minimum size 600X600X1400MM (200mm above the ground level) using 8mm &12mm TMT bars, suitable for fixing of J-bolts and base plate of the octagonal pole including supply and embedding of 2 Nos. of 500mm length 40mm dia HDPE pipe with suitable bends at the ends for encasing incomming and outgoing cables complete in all respects as directed by engineer in charge. Notes: (1) Refer foundation drawing.(2) J-Bolts/nuts/base plate are included in BOQ Sl.Nos.1. (3) Concrete cutting and excavation will be measured separately.