Construction of Building and allied Infrastructure Facilities for AODAD office at Factory area, HAL Nasik.

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turnover during the last 3 years, ending 31.03.2025 should be at least 30% of the approximate estimated amount put to tender. (i.e ₹ In Lakhs)

Turn over (Rs. In Lakhs)

Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year.

Solvency : The solvency required will be 40% of the approximate estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 Months from the final date of submission of the tender i.e ₹ In Lakhs

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience Experience of having successfully completed similar works(Refer NIT "Work Details") during last 7 years ending on the previous day of last day of submission of tender should be either of the following: [Latest work experience certificate may be uploaded] a) Three similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender against each work in the tender notice. (Or) b) Two similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender against each work in the tender notice. (Or) c) One similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender against each work in the tender notice.

80% (One Work)

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GST No Registration Number.

ESIC Registration Number

EPF Registration Number

Earnest Money Deposit (EMD) details in ₹

License: License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies.

Documents to be uploaded along with tender

Constitution, legal status along with attested copies of Deeds / Articles and Memorandum of Association, etc., as applicable.

Power of Attorney in case of Pvt. Limited/limited companies

Details of person holding the power of Attorney.

Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)

Registration with HAL/ Other organization if any.

Copy of PAN card issued by Income tax authority

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of ECS viz.,where payments are to be credited along with the scan copy of Blank Cheque leaf

Blank Cheque leaf to be Uploaded in eProcurement Portal.

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal.

Udertaking Annexure-K

Address for correspondence:

Contact details

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to 175) including price bid do hereby accept all the terms and conditions laid down.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches, drains, Cable trench or like (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts , including getting out the excavated soil and disposal of surplus excavated soil , within a lead of 50 m all complete and as directed by EIC. Note: Soil, if any, which is required for refilling shall be stacked at site as per the directions of EIC.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m

Excavating, supplying and filling of local earth / Murrum within HAL Factory Premises (including royalty if any) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) all as directed by EIC.

Centering and shuttering including strutting, propping etc. and removal of form for

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above. TMT bars Fe 500D or More

Providing and constructing brick masonry in subclass 'B' Bricks , straight or curved on plan to any radius built in CM 1:4 above or below ground at any height and level including necessary scaffolding, curing , providing reinforcement, if required, all complete as specified and as directed by the EIC. (Brick of class designation 35kgf/cm2)(MS reinforcement will be paid separately under respective item).

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm to 300 mm thick with Grade-I AAC blocks of density 551 to 650 Kg/Cum. conforming to IS2185(Part 3) in super structure above plinth level upto floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and fixing M.S. grills of approved/required pattern in frames of windows, ventilators, etc. with M.S. flats, square or round bars, etc. including priming coat with approved steel primer all complete as specified and as directed. Fixed to openings with rawl plugs screws etc.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and applying 18 mm cement plaster on brick/AAC/concrete surface in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 fine sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) finished rough with sponge at any height and level including scaffolding, curing, etc. all complete as specified and as directed by EIC.

Providing and applying 15 mm thick cement plaster finished with a floating coat of neat cement of mix : 1:6 (1 cement: 6 fine sand) with neeru finish to concrete/AAC/ brick surfaces, in all positions and level including scaffolding, curing etc. complete as specified and as directed.

Providing and applying 6mm thick cement plaster on ceiling in cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and neeru finsih all complete as specified and as directed by EIC.

Providing and applying white cement based putty of 1 mm thickness over plastered surface of approved brand and manufacturer to prepare the surface even and smooth complete as diected by EIC.

Providing, applying and Finishing exterior walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shades with Two or more coats (applying additional coats wherever required, to achieve even shade and colour) applied @ 1.43 ltr/10 sqm of approved quality, brand having VOC content less than 50 grams / Litre (Asian -Apex Ultima Protek Duralife/ Nerolac - Excel Everlast 12 / Berger – Weathercoat Long Life 15 or equivalent) over and including priming coat of acrylic water based exterior alkali resistant primer with silicon additive or equivalent of approved quality, brand & applying with roller for fair finish as approved by EIC

Providing and applying two coats of acrylic emulsion paint on walls or ceiling of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including priming coat with water thinnable cement primer having VOC content less than 50grams/litre all complete as specified and as diected by EIC.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be as specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily as specified and as directed by EIC.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar 1:3 For the purpose of measurement the entire treated surface will be measured. Note: Defect liability period for this item will be 5 years from actual date of completion of work has a Whole.

Providing and laying gola in 75x75 mmdeep chase in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design

Supplying, stacking, laying, spreading & compacting stone aggregate of specified sizes to WBM specification in uniform thickness, hand picking, Compaction with Mechanical vibrator/ rolling with 3 wheeled road / vibratory roller 8-10 tonne vcapacity in stages to proper grade and camber applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering and compacting to required density complete all as specified and as directed.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing various accessories for doors, windows, partitions etc. complete all as directed and specified.

Providing and fixing with float glass of panes 5.0 mm thickness (weight not less than 12.50 Kgs/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decoarative type, core of block board construction with 30mm thick plywood face panels commercial type on bothside including ISI marked stainless steel butt hinges with necessary screws. all complete as specified and as directed by EIC.

Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish as approved with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality all complete as specified and as directed by EIC.

Extra for providing lipping and fixing with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing aluminium sliding door bolts/Adrop, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300X16MM

Providing and fixing aluminium tower bolts of 250x10 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI marked of 125 mm anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Providing and fixing 15 mm nominal bore CP brass stop/angle cock of approved quality conforming to IS 8931 as spcified and as directed.

Providing and fixing PTMT pillar cock of approved quality and colour .

Providing and fixing 15mm nominal bore and 300mm long unplasticised PVC connection with brass unions/nuts complete as directed.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work , including cutting chases and making good the walls,etc.

Providing and fixing in position approved and ISI brand PVC SWR drainage pipes in floors/ trenches or wall including connecting to drainage lines and sanitary wares, clamping with necessary fasteners or laying in trenches. The drainage lines are required to be tested for leakages all complete as specified and as directed. Earth work wherever required will be paid seperately.

Providing and fixing in position approved and ISI brand PVC SWR fittings to drainage pipes as below:

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing P.V.C. long arm Nahani Trap of 100mm diameter including SS grating, bend and connecting piece upto the outside face of the walls making good damaged surface, testing etc. complete as directed by Engineer in charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Providing and placing on terrace polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank all complete as specified and as directed.(Capacity of each Tank may be 1000lit as required and directed.)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with same brand solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required all complete as specified and as directed.

Providing and fixing white vitreous China Wash basin of size 550x400 mm with necessary brackets/anchor bolts including providing and fixing 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, including cutting and making good the walls wherever require complete as specified and as directed.

Providing and fixing 8mm dia CP/SS jet with flexible tube upto 1 meter long with SS triangular plate to EWC of approved brand and quality complete as specified and directed by EIC.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Power Distribution Board for Power : Supply , Installation , Testing and Commissioning of 8 Way VTPN, Double door Protection IP 43 Power Distribution Board Sheet Steel, 415 V, 3 Phase MCB Distribution Board for power distribution on Surface Mounted complete with 200 A tinned copper bus bar, common neutral link , earth bar, din bar for mounting MCBs, inter connections, powder painted including earthing etc. as required. The Distribution Board should be suitable for 125 A 4P MCCB - 1 No as Incomer. The rates includes installation of the 8 Way VTPN Distribution Board on wall with all supporting accessories etc. Make of VTPN Distributin Board - L&T/ Siemens/ Legrand/ Havells

Supply Installation Testing and Commissioning of Surface/Concealed Light Distribution Board ( LDB) 8 Way for Lighting/Fans , Three Phase 415 V AC Supply , 50 Hz, including Neutral Bus Bar and Earth terminal complete with Metal Double Door Protection IP 43 complete. The LDB should be suitable for 63A 4P -1 No as Incomer. The Distribution Board will be installed Surface/Concealed in wall. The installation rate includes of all supporting accessories and hardware required for concealed/surface installation of the Distribution Board in wall. Make of LDB - L&T/ Siemens/ Legrand/ Havells

Supply and Installation and Testing of Incomer for VTPN of Rating 125 A MCCB, 4 Pole, 36 kA in 8 Way VTPN Distribution Board with connections complete. Make of MCCB - Siemens/L&T/Legrand/Havells

Supply and Installation of 20A SP MCB, 10KA, D -Curve in Power VTPN Distribution Boards. Make: Siemens / Legrand / L & T

Supply and Installation and Testing of Incomer of Rating 63A MCB 4 Pole, 10 kA ,C Curve in the TPN Distribution Board with connections complete . Make of MCB - Siemens/L&T/Legrand/Havells

Supply and Installation of 10 A to 32 A SP MCB , 10 kA, C Curve suitable to install in Light Distribution Boards. Make: Siemens/L&T/Legrand/Havells

Blanking Plates for the Distribution Boards

Supply and Installation of 40A, DP (30mA) RCCB in Light Distribution Boards . Make of RCCB : Siemens / Legrand / L & T/Havells.

Supply and Laying and Testing of LT cable from Main LT Panel to 8 Way VTPN of 1.1 kV Grade, XLPE Insulated , of size 3.5 Core x 95 sqmm XLPE Aluminium Armoured Cable laid in excavated cable trench, built up cable trench, through RCC full round hume pipes, cleated on walls and on cables trays(indoor/outdoor) with all hardware materials, saddles etc complete required for installation of the cable.Make of Cable : Polycab/ Finolex/ Gloster

Supply and Laying and Testing of LT cable from Main LT Panel to 8 Way TPN LDB a of 1.1 kV Grade, XLPE Insulated , of size 4 Core x 25 sqmm XLPE Aluminium Armoured Cable laid in excavated cable trench, built up cable trench, through RCC full round hume pipes, cleated on walls and on cables trays(indoor/outdoor) with all l hardware materials, saddles etc complete required for installation of the cable.Make of Cable : Polycab/ Finolex/ Gloster

Supply and Termination of 3.5 Core x 95 Sqmm XLPE insulated Aluminium armoured cable with double compression type gland, heavy duty aluminium lugs , insulation tape, identification tags etc., including earthing of gland etc. Make of Cable Gland : Dowell/HMI, Make of Lug : Dowell/Reputed approved by EIC

Supply and Termination of 4 Core x 25 Sqmm XLPE insulated Aluminium armoured cable with double compression type gland, heavy duty aluminium lugs , insulation tape, identification tags etc., including earthing of gland etc. Make of Cable Gland : Dowell/HMI Make of Lug : Dowell/ Reputed Make approved by EIC

Supply & Drawing Copper Wires through Concealed FRLS PVC Conduit/ PVC Casing -n-Capping) in surface for Sub Main Wiring for MDS, and 16 A Switch Socket - 2 runs (Phase and Neutral) of 1100V grade FRLS PVC insulated multi strand copper conductor wires of size 4 sqmm for Phase and Neutral and 1 run for Earth of 1100V grade FRLS PVC insulated multi strand copper conductor wires of size 4 sqmm with all fiixng accessories etc completeas per site condition. Make of FRLS PVC Copper wire: Polycab/Finolex/Havells.

Supply & Drawing Copper Wires through Concealed FRLS PVC Conduit/PVC casing -n-capping) in surface for Sub Main Wiring for Computer Boards and Light Switch Boards and for Looping - 2 runs (Phase and Neutral) of 1100V grade FRLS PVC insulated multi strand copper conductor wires of size 2.5 sqmm for Phase and Neutral and 1 run for Earth of 1100V grade FRLS PVC insulated multi strand copper conductor wires of size 2.5 sqmm with all fiixng accessories etc completeas per site condition. Make of FRLS PVC Copper wire: Polycab/Finolex/Havells.

HMS FRLS ROUND CONDUIT PVC PIPE/PVC CASING-n-CAPPING FOR SUB MAINS :Supply And Installation of Concealed ( Recessed) Heavy Mechanical Stress ( HMS) FRLS Rigid Non Metallic PVC Conduit Pipe of 25 mm diameter concealed in wall / PVC Casing -n-Capping) in surface from Power Distribution Board (PDB) to Power Boards , Light Switch Boards including all junction boxes ( 1 to 4 way), tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts, saddles, pipe hooks etc complete concealed ( recess) in wall.Make of PVC Conduit/ PVC Casing -n-Capping: Precision / Modi / Finolex/ Polycab / Pressfit/VIP

Supply, Installation and Testing of Concealed/Surface Mounted Power Board consisting of prewired bank of 3 Nos of 6/16 Amps , 2/3 pin combined (250 Volts) single phase modualr Socket controlled by 3 Nos of 16 Amps single pole modular Switch with modular indication lamp mounted on 12 module modular flush mounted GI box covered by 12 module modular white color plate with frame, flush in the wall with all fixing accessories etc. Make of Modular Switch, Modular Socket, Modular Plate with Frame, Modular Metal Box : Anchor Roma/MK.

Supply, Installation and Testing of Concealed( Recessed Mounted)/Surface Mounted combined SS Board consisting of 1 No of 6/16 Amps, 2/3 pin combined (250 Volts) single phase modular socket controlled by 1 No of 16 Amps single pole modular switch with 3 module flush mounted modualr GI box and 3 module face plate with frame flush mounted in the wall with all fixing accessories etc. Make of Modular Switch , Modular Socket, Modular Plate with Frame, Modular Metal Box : Anchor Roma/MK. Note : Sub Main Wiring not included in this item

Supply and Installation of Concelaled ( Recessed)/Surface Mounted 20 Amps, 3-pin Single Phase Metal Clad Industrial Metal Clad Socket, controlled by 20 Amps SP MCB D Curve enclosed in a powder coated MS box flush mounted in wall with all fixing accessories etc. Make of Metal Clad Box with MCB and Socket : Siemens/ Legrand / L & T/Legrand Note : Sub Main Wiring not included in this item

Supply, Installation and Testing of Concealed( Recessed Mounted)/Surface Mounted of Modular Socket Board for Wall Fan consisting of 1 No of 6 Amps, 2/3 pin combined (250 Volts) 2 module Socket with 2 module flush mounted modualr GI box and 2 module face plate with frame flush mounted in the wall with all fixing accessories etc. Make of Modular Socket, Modular Plate with Frame, Modular Metal Box : Anchor Roma/MK.

Supply, Installation, Testing of Concealed ( Recessed) Point Wiring/ Surface Mounted for Light/ Ceiling Fan/ Exhaust fan & 6A independent socket with 2 runs of 2.5 sqmm for Phase and Neutral + 1 run of 1.5 sqmm FRLS PVC insulated 1100V grade multistrand copper conductor wires including and through Concealed Heavy Mechanical Stress FRLS PVC conduit of size 20 mm in wall / ceiling/PVC Casing -n -Capping on Surface including all junction boxes ( 1 to 4 way) , tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts, saddles, pipe hooks etc complete up to first point with 6 A Modular Switch with indicator , 6A Modular Socket- 2/3 pin combined 2 module, Modualr white cover plate with frame, Modular metal flush GI box along with all necessary fixing accessories like mounting screws etc..The wiring should confirm to 732 :1982. Make of Modular Switch ,Modular Socket, Modular Plate with Frame, Modular Metal Box : Anchor Roma/MK. Make of FRLS copper wire : Polycab /Finolex / Havells. Make of PVC Conduit/PVC Casing-n-Capping : Precision / Modi / Finolex/ Polycab / Pressfit/VIP. Note : The measurement will be counted point wise. One Switch controlling one light/Ceiling Fan/Exhaust Fan will be counted as one point. The Switch & Socket installed on same board will be treated as half point. Sub Main Wiring not included in this item

Supply, Installation, Testing of Concealed ( Recessed) Point Wiring for Added Light Point with 2 runs of 1.5 sqmm for Phase and Neutral + 1 run of 1.5 sqmm FRLS PVC insulated 1100V grade multistrand copper conductor wires including and through Concealed Heavy Mechanical Stress FRLS PVC conduit in wall / ceiling/ PVC Casing -n -Capping on Surface including all junction boxes ( 1 to 4 way), tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts, saddles, pipe hooks etc complete controlled from existing switch . The wiring should confirm to 732 :1982. Make of Modular Switch , Modular Plate with Frame, Modular Metal Box : Anchor Roma/MK. Make of FRLS copper wire: Polycab/Finolex/Havells. Make of PVC Conduit : Precision / Modi / Finolex/ Polycab / Pressfit/VIP.Note : Sub Main Wiring not included in this item

Supply , Installation and Testing of Recessed Mounted LED luminaire of size 600 mm x 600 mm of rating 36 Watt, 220 V AC, CRCA white powder coating housing, with lumious lux 3600 lm , luminous efficiacy 100lm/W, Coreelated colour temperature 5700K ± 300 K , color rendering index > 80, operating temperature range -5 deg C to +50 deg C, Input Volatge - 175 to 270 V AC ,THD <20%, Built in surge protection - 3 kV suitable for false ceiling i.The rate includes insatllation of the LED Luminarie with all accessories, steel chain/support etc required on false ceiling complete. Make : Bajaj/ Philips/ Havells/Wipro

Supply , Installation and Testing of Recessed Mounted LED aethetically design Round Type Downlight luminaire of rating 24 Watt, 220 V AC with aluminium housing and heat sink recessed mounted with high efficiency of > 100 lm/W ,die cast aluminium housing and high efficient acrylic diffuser including connecting up with driver complete. The rate includes insatllation of the LED Luminarie with all accessories , steel chain/support etc required on false ceiling complete. Make : Bajaj/ Philips/ Havells/Wipro

Supply, Installation and Testing of aethetically design Surface mounted square type luminaire of rating 12 Watt, 220 V AC with aluminium housing and heat sink. The rate includes installation of the LED Luminarie with all accessories, support etc required ceiling complete. Make : Bajaj/ Philips/ Havells/Wipro

Supply and installation of Mirror Light 12W Natural / warm white as directed by Engineer-Incharge. Make. CG/ Havells/ Orient Electric / surya / GR.

Supply and Installation of 1200 mm Sweep 5 Star Rated Ceiling Fans with BLDC Motor. Class of Insulation B , 3 Nos of Blade, , with minimum 300 mtrs length down rod 2 nos of canopies, power factor not less than 0.9, Service Value not less than 6 CM/M/W, Air Delivery Minimum 210Cum/Min, THD less than 10% , Remote unit for speed control and all remaining accessories complete electronic modular fan step regulator 2 module , 230 V, 1400 mm swep. Min air delivery 210 CFM with all necessary accessories for installation on ceiling , steel structure etc. Make : Bajaj/Usha/Havells

Supply and Installation of Two Module Stepped Electronic Fan Regulator mounted on Modular GI box with Modular White Cover Plate with Frame along with all necessary fixing accessories like mounting screws etc complete for Ceiling Fan

Supply and Installaiton and Testing of 400 mm Sweep Wall Mounted Office Fan complete with all necessary bracket and other accessories complete for installation on Wall, Steel Structure etc. Make : Bajaj/Havell/Crompton

Supply and Installation and Testing of Exhaust fan, steel body AC single phase 230V, of size 225 mm sweep with, blades, and frame with all necessary bracket for installation on wall, steel structure etc. Make : Almonard/Bajaj/Crompton

Supply and Installation of 230 V, Exhaust Fan 6/9 inch, Louvers type with all necessary bracket and accessories for installation on wall etc. Make : Almonard/Crompton/Bajaj

Supply and Installation and Testing of 20 pair krone Connectors Terminal Box with including krone connectors ,locking arrangements etc complete. Make : Standard as approved by EIC

Supply , Installation and Testing of Concealed (Recessed)/Surface Mounted Telephone Information outlet (RJ11) modular type jack with including Synergy Face Plate, with level holders Including modular white color frame plate ,modular flush GI box including all the accessories required complete for the installation of the Telephone socket in wall. Make : Havell/Tyco/D-Link. Note : This is concealed ( recessed) telephone point.

Supply, Laying and Testing and Termination of Telephone wire of size 2P x 0.5 sq.mm through Concealed Heavy Mechanical Stress FRLS PVC conduit of size 20 mm in wall / ceiling/PVC Casing-n-Capping on Surface etc complete from Telephone Junction Box to each telephone point including all accessories complete required for laying of the telephone wire.The installation rate also incudes End Termination of the 2P Telephone Cable in to the Telephone Socket as well as in 20 Pair Telephone Conenctor Termial Box complete. Make of telephone wire : Polycab/Delton/Finolex/Havells.

Supply and Laying of Concealed (Recessed) Heavy Duty Non Metallic FRLS PVC Conduit Pipe of size 20 mm/PVC Casing-n-Capping from telephone junction box to each telephone box complete with ncluding all junction boxes ( 1 to 4 way) , tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts, saddles, pipe hooks etc complete. Make of PVC Conduit/PVC Casing-n-Capping- Precision / Modi / Finolex/ Polycab / Pressfit/VIP

Supply and installation of GI strip of Size 25 x 6 sq.mm inside the building in wall and in floor and in excavated trench outside the building including all fixing accessories such as saddles etc complete required for laying of the earthing strip.

Rupees Sixty Five Lakh Ninety One Thousand Nine Hundred Twenty Two and Thirty Two Paise Only

Approximate Basic Amount Put to Tender

Rupees Eleven Lakh Eighty Six Thousand Five Hundred Forty Six and One Paise Only

Rupees Seventy Seven Lakh Seventy Eight Thousand Four Hundred Sixty Eight and Thirty Four Paise Only