SPECIAL REPAIR TO STANDBY GDCC AND TECH GATE, PROVISION OF SERVANT QTRS AT OMQ NO.128/4 AND PROVISION OF PRACTICE CRICKET PITCH AT STATION SPORT GROUND AT AF STN GWALIOR

Amount

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material upto 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L, for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair complete all as specified and directed..

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

M&L, vitrified ceramic coloued tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1 :6 complete all as specified and directed..

All as per sl item No.6 but, on vertical surfaces over and incld 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed by the Engineer-in-Charge.

M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed.

M & L for Rendering 10mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and fair as backing coat for receving tiles complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying one coat of primer two coats of oil bound distemper, over 3mm thick wall care putty on walls complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and pplying two coat weather proof (ACE paint from Asian paint /Berger paint /Shalimar paint) exterior emulsion paint over one coat of suitable primer on external wall surfaces, complete all as specified and directed.

complete removal of existing treatment from old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying two coat of oil emulsion distemper on old decorated surface of wall over 3mm thick wall care putty etc, complete all as specified and directed.

M&L for removal of complete existing treatment from old deoreted surfaces of walls and applying JK/Birla white wall care putty over a coat of suitable primer on old surface of wall to make the surface even and smooth inculding cutting of groves in putty at its old position, rubbing//sanding of the to the entire satisfaction of Engineer in Charge. with sand paper and applying two coat weather proof (ACE paint from Asian paint /Berger paint /Shalimar paint ) exterior emulsion paint over one coat of suitable primer on external wall surfaces complete all as specified & directed

Demolition of stone slab and tiles laid bedded and pointed in any mortar or any description or thickness in floor and aprons etc complete all as specified and as directed.

M&L in repairs Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provideed etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zince coating GI based semi corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engineer-in Charge.

S&F Pre-painted galvalume aluminium zince coating GI based semi plain steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in ridge, fixed with self tapping screws all as specified and directed by Engineer-in Charge.

S&F mild steel as in Roof trusses (framed), trussed,purlins, rafter, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,gusset and bearing plates etc complete all as specified and directed.

M&L preparation of new steel surfaces exc 10 cm width or girth and applyinjg two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE complete all as specified and directed.

Supply only 6.3 mm thick sheet glass ordinary quality frosted on one sid for aluminium doors and fully glass partition in squares exceeding 0.50 Sqm in each pane etc, complete all as specified and directed.

S&F powder coated anodised Aluminium grills with aluminium frame fixed with stainless steel screws in windows/ventilator, openings etc, complete all as specified and directed.

S&F 2.5 to 3 mm thick composite panel fixed to mild steel frame work with screws as in wall cladding. The joints of all panels around the frame work shall be made seamless from all side with the use of silicon or as per manufacturers instructions complete all as specified and directed. Make: M/S Alstone International, Noida (UP) or equivalent as approved by GE.

S&F fancy type decorated PVC sheathed GI curtain hanging rods 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.

S&F in repairs vitreous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor incld Seat linced cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed by Engr-in-charge.

S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

All as per item No 36 above but 20mm bore.

M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

All as per item No 38 above but 20mm bore.

S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

All as per item No 40 above but 20mm bore.

S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed.

S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F , fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F, rotational mounded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed.

Taking down chowkhat or frames not exe 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work & removing from site etc complete all as specified and directed by Engineer-in Charge.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F in repairs of fancy type overhead shower with arm swivel joint chromium plated screwed down 15mm bore complete all as specified and directed. Make- Plumber/ Jaquar (ESSCO) or requivalent as approved by GE.

S&F corner galss shelf 8mm thick (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F high quality plastic bathroom cabinet of size 550 x 342 x 125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

Excavation in trenches, not exceeding 1.5 M wide and not exc 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L Brick work with old size bricks with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:6 complete all as specified and directed.

Returning, filling in including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exc 500.00 M but n exc 1.50 Km and depositing where directed at a level n exc 1.50 KM above starting point complete all as specified and directed by the Engineer -in-charge.

S&F HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified and directed.

S&F suspended false ceiling grid system 600 x 600 mm with main runner 32 x 24 x 0.8 mm, cross tee 26 x 24x 0.80 mm and wall angle 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Hard soil etc complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm broken stone , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation. etc complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kersbs, bedblocks and like etc compelet all as specified and directed

M&L for Plain cement concrete 100 mm thick, 1:2:4, type B-2(using 20 mm graded stone aggregate) and finishing the surface even and smooth without using extra cement as in flooring/hard standing/paving complete all as specified and as directed.

M&L PCC 1:2:4 type B-1using 20 mm graded stone aggregate in drains and surface channels and finishing complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends complete all as specified and directed.

M&L TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars 10 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for precast RCC 1:1.5:3 type A 1 as in cover slab and like for manhole/ drains and like with plane faces complete all as specified and directed by Engineer-in-Charge.

M&L for chequred tiles of approved design,colour &of ( size 200mmx200mmx25mm) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 Completed all as sepcified and directed.

Reinforcement cement concrete (Nominal mix) Type B1 1:1.5:3 (using 20 mm graded aggregate) as in columns, footing and plinth beam complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) Type B1 1:1.5:3 (using 20 mm graded aggregate) in beams,lintel over 1.5m span complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) Type B1 1:1.5:3 (using 20 mm graded aggregate) in slabs complete all as specified and directed.

Reinforcement cement concrete (Nominal mix) Type B1 1:1.5:3 (using 20 mm graded aggregate) in chajjas complete all as specified and directed.

TMT Bars 8mm dia, cut to length, bent to shape as required including cranking, bending, hooking ends and binding with MS Wire (annealed) not less than 0.9 mm dia, as in stirrups for column, plinth beam, beam and lilten spaces and binders complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, plinth beam, lilten and similar work with flat rough finished surfaces of concrete complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall and finished fair & even in CM 1:4 complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

S&F 2nd class hard wood as plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of llnd class hard wood complete all as specified and directed.

S&F factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified and directed.

S&F 100mm stainless steel, but hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long complete all as specified and directed.

S&F aluminum handles cast type anodized 150 mm size complete all as specified and directed.

Supply and fixing of steel door spring of size 200mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

Supply and fixing Sheet Glass ordinary quality, 3.00 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Frame, Window, complete all as specified and as directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Unplasticised PVC pipes of 32 mm bore pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc as specified in SSR and complete all as specified and directed.

S&F Sink of Stainless Steel 1.0mm thick Kitchen or Laboratory Overall size 495mm x 420 mm Bowl size 410x330x 160mm with Plugs, Washers and Wastes, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs complete all as specified and as directed

S & F fixed in repais Vitreous china wash basin , white , flat back, size 580 x 450 mm, including 15 mm CP pillar taps, waste ,chain and plug and porcelain stopper but incluing 32mm bore PVC waste cupling and waste pipe up to 80 cm length, brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S & F angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F Bib taps, 15 mm dia, cast copper alloy, chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F grating doom with hole or without hole 100mm dia size with PTMT complete all as specified and directed.

S & F in repair 75mm dia cast iron floor trap including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) . complete all as specified and directed.

S & F 75mm dia cast iron gully trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) . complete all as specified and directed.

S & F in repair 75 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F in repair bends of 75 mm Bore PVC (SWR) bends complete as all specified and as directed.

S7 F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40 gms) complete all as specified and as directed

M&L cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S & F 100mm cast iron sanitary connection socket to fit AWC outlet. complete all as specified and directed

M & L for preparation of new wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel work as in small ariticles as band, strap, hold fast and smiliar articles complete all as specified and directed.

S&F salt glazed stoneware pipe of 150mm dia grade 'A' laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

M&L for cement concrete bed (1:3:6) type C-2, using 40 mm graded to drain pipe including packing under and haunching against the side of pipe after they are laid and tested for bore of pipe 150 mm complete all as specified and directed.

M&L providing Precast Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in cover slab (for manholes, drain etc)set in cement mortar (1:4) complete all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out soft/loose soil etc all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor/hardstanding finishingcement concrete surface even and smooth without using extra cement etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, retturning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in soft/loose soil etc complete all as specified and directed.

S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using FRSLH1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits /Casing caping (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

Description same as per Srl item No 125 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.complete all as specified and directed..

Description all as per item No 125 above but point wiring for one 5 pin socket outlet, on same board .

One 3 pin socket 15 Amp independent with PVC insulated and unshethed copper stranded conductor of size 2.5 Sqmm including 1.5 Sqmm PVC insulated and unsheathed copper conductor for continuous eathing complete all as specified and directed.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified and directed.

M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified and as approved

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and as approved

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified and directed.

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

M&L for switch/socket combination 2 in 1, 3 pin 5 & 16 Amps flush type universal complete all as specified and directed.

Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt complete all as specified and as approved

Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge

S&F LED bulk head fitting 10 watt energy saving new generation IP 65 luminatre with opel diffuser complete with lamp all as specified and directed by Engr - in Charge.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal magnet in multipal optics and equiped with IP66 protection with impact and corrission resistant complete with driver and lamp all as specified and directd.

Dismaintling & Taking out MCB DBs VTPN with all MCB's/Isolator & metal clade box any size , any type and capacity complete all as specified and directed.

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed.

Supply and fixing of sheet metal enclosure Double door for DB’s 12 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43-IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar neutral bar, strandard DIN rail. earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one TPN-MCCB 100/125 Amps as incomer and 12 SP MCBs (or any combination of SP/TP MCBs) outgoing complete all as specified and directed.

Dismaintling & Taking out MCB's/Isolator/MCCB any size , any type and capacity complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps, 10 KA ,240 Volts complete all as specified and directed.

S&F MCB Single pole and neutral 63 Amps, 240 Volts complete all as specified and directed.

S &F MCCB, 3 pole. 125 Amps, 50Hz. 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified & directed.

Disconnecting & taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. (NOTE: Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.)

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled /casing caping PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4.00 Sqmm as earth continuity conductor all as specified and directed.(NOTE : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface complete all as specified and directed.

All as per item No 148 as above but 6 Sqmm and 6 Sqmm earth wire with PVC conduit 25 mm dia med grade

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers taking down of AC box all as required and directed by Engineer-in-Charge.

Taking down carefully from existing place for ceiling fan/ Exhaust fan and removing to MES store yard Scraping,cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site complete incl electric connection with three core flxible wire 1.5 sqmm all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

S&F LED mirror light 2 feet 10 watt complete with lamp all as specified and directed by Engr - in Charge.

S&F in replacement 34W LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal. Fixture size 595x595x70mm complete with LED tube with driver and all accessories specified and directed by Engr -in- Charge.

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

RADHA MADHAV CONSTRUCTIONS