E-TENDER FOR REPAIRS FOR REPLACEMENT OF BER LIFTS AT NS 88 SARASWATI AND NS 122 SABARMATI AT NAVAL PARK GHATKOPAR UNDER GE NW BHANDUP

Amount

Dismantling of existing BER 08 passenger lift (554KG) lifts to serve (G+05) upper floor of any make complete with all accessories such as Machine doors, guide rails, counter weight car, rope, wiring & control panel etc dismantling under item No 1 & 2 have declared BER and deposited to MES store yard for further disposal action complete all as specified and directed. All damaged RCC/PCC / brick wall shall be making good with existing. Note: Building Number NS-88 and NS-122at MOORA at MO(MB) Ghatkopar. Notes: (a) Before carrying out dismantling work of a particular lifts the contractor shall first procure the entire material required for installation of new lift. There after the contractor shall obtain permission from Engr-in-Charge to carry out dismantling of the existing lift. (b) Storage facilities for storing the lift material procured by the contractor for installation of new shall will be arranged by the contractor at MO(MB) Ghatkopar. (c) Old u/s lift including all comonents be deosited to AGE E/M yard as directed by Engr-in Charge.

Supply, install, testing & Commissioning 08 passenger lifts suitable to serve G+05 upper floors with AC variable voltage & Variable frequency (VVVF) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with/without attendant, automatic center opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device(ARD) system, 2D infra red sensor in full height of door & built in announcing system without hand set (02Nos, one each car & near Ground floor landing door) all as specified below:-Note:- Lift OEM submit detailed specification/design parameters, construction drawing of all components of lifts as per IS-14665 for approval of accepting officer before execution of work.(one at Saraswati ) Make of Lift : Makes of lift as per list of makes attached with tender.Type of Lifts : Traction gearless passenger Load Capacity : 544 KG (08 Passenger), Speed : 1.0 Mtr/Sec with single speed motor, Power Supply : 415 Volt, 3 phase AC 50Hz, Type of drive : AC Variable voltage & Variable Frequency drive, Type of machine : Traction earless Permanent Magnet MotorCar Size(Inside) : 1300 mm x 1100 mm (minimum)Car door & landing door at all floors : Center opening with VVVF drive opening size 800 mm x 2000mm, sliding type fabricated by stainless steel sheet not less than 1.2mm thick having hairline finish(N-304).Car Enclosure: Standard manufacturing with MS frame & stainless steel sheet not less than 1.5mm thick with hair line finish(N-304) having stainless steel false ceiling with hair line finish, internal lighting arrangement with LED light fittings complete, internal ventilation system provided with concealed arial flow/cross flow fan with auto cut off system & stainless steel/wire mesh for protection.

Signals:-Combined luminous hall buttons with LCD/LED hall position indicators at all floor.LED for car position indicator to be fitted in COP made of stainless steel. One No car operating panel with luminious buttons in car(Stainless steel)Car direction indicator in car & landing Battery operated alarm bell & emergency light (recharchable) along with suitable maintenance free battery. Overload warning feature in car cabin(Display & audio buzzer type both).Fire mans switch one No per lift to be installed at ground floor near landing door. All signals fixture & car operating panel on stainless steel face plate with hair line finish. Infra red sensor safety edge of door for entire height. Built in announcing system without hand set-02 Nos(one for lift car & ground floor landing door & one announcing system, press & speak type 3 way communication with machine room).The interior of the car should be provided with a device that audibly indicates the floor position of lift car has reached and indicates that car entrance/exit door is open or closed. Stainless steel hand rail 32 mm dia all around 3 inside the car cabin Stops & Opening :06-06 (All opening on same side)Safety Device: (i) As per OEM design automatic rescue device (ARD) /automatic landing device to be operating with maintenance free batteries for landing as specified. Make: As per OEM specification & approved drawings.(ii) Safety governor against over speed car cabin as per norms laid down by PWD(lift) Bombay with dual safety system including mechanical & electrical.Operation:Simplex full collective automatic operation with/without attendant.Machine Room : Located above the hoist way.Hoist-way construction: RCC wall construction as existing at site internal dimension 2000mm x 2070mm availableAC-VVVF drive shall be of as per list of Make : Microprocessor based with VVVF drive close loop Door Shall have AC-VVVF controlled close loop operated.Face plate shape shall be rectangular and stainless steel in hairline finish.Counter weight: Made of cast iron or MS profile cut.One number wall mounted type telephone instrument of make Crompton Greaves/Beetel installed inside of car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with trailing cable. The telephone instrument shall be connected in the telephone DB installed in the machine room.One number electrically operated siren operating voltage 240 volts having audible range of 0.3 KM including independent switch inside of car cabin and connecting cables from car cabin to machine room. The siren shall be installed at appropriate place.(i) One toughened looking mirror (of best quality) of size 1100mmx 1100mm x 4 mm thick with silvered sheet frame. (ii) One number LED light to be connected with UPS for emergency lighting purpose.

M&L for 15 thick mirror polished black granite slab, machine cut mirror polished cladding with chamfered/rounded edges, approved decorative design including necessary PCC work, granite slab set & jointing in cement slurry or in CM 1:3 plastering as required & pointed in white cement mixed with pigment to match with shade of granite for lifts architrave at all floors complete all as specified and directed.

Supply, install, testing & Commissioning 884 kg 13 passenger lifts suitable to serve G+05 upper floors with AC variable voltage & Variable frequency (VVVF drive) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with/without attendant, automatic center opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device(ARD) system, 2D infra red sensor in full height of door & built in announcing system without hand set(02Nos, one each car & near Ground floor landing door) all as specified below:-Note:- Lift OEM submit detailed specification/design parameters, construction drawing of all components of lifts as per IS-14665 for approval of accepting officer before execution of work. Make of lift as per list of makes attached with tender. Location Sabarmati. : 13 Passengers Load Capacity : 884 KG (13 Passenger)Speed : 1.0 Mtr/Sec with single speed motor Power Supply : 415 Volt, 3 phase AC 50HzType of drive : AC Variable voltage & Variable Frequency drive Type of machine : Gearless & directly coupled Horizontal traction machine Car Size(Inside) : 2000mm x 1100mm (minimum) Car door & landing door at all floors : Center opening with VVVF drive opening size 900 mm x 2000mm, sliding type fabricated by stainless steel sheet not less than 1.2mm thick having hairline finish(N-304).Car Enclosure: Standard manufacturing with MS frame & stainless steel sheet not less than 1.5mm thick with hair line finish(N-304) having stainless steel false ceiling with hair line finish, internal lighting arrangement with LED light fittings complete, internal ventilation system provided with concealed arial flow/cross flow fan with auto cut off system & stainless steel/wire mesh for protection. Terminal buffers: Metal special spring buffers as per manufacturer specification. Door Opening(inside): Protected by centre opening stainless steel doors with hairline finish doors with clear opening size about 900mm x 2000mm.Car & counter weight Guide: Guide rails of 'T' section mild steel as per OEM design counter weight shall be cast iron as recommended by OEM. Flooring: Aluminium chequered plate 5mm thick

Signals:-Combined luminous hall buttons with LCD/LED hall position indicators at all floor. LCD for car position indicator to be fitted in COP made of stainless steel. One No car operating panel with luminous buttons in car(Stainless steel face plate) Car direction indicator in car & landing, Battery operated alarm bell & emergency light (researchable) along with suitable maintenance free battery.Overload warning feature in car cabin(Display & audo buzzer type both). Fire mans switch one No per lift to be installed at ground floor near landing door. All signals fixture & car operating panel on stainless steel face plate with hair line finish. Infra red sensor safety edge of door for entire height. Built in announcing system without hand set-02 Nos(one for lift car & ground floor landing door & one announcing system, press & speak type 3 way communication with machine room). The interior of the car should be provided with a device that audibly indicates the floor position of lift car has reached and indicates that car entrance/exit door is open or closed. Stainless steel hand rail 32 mm dia all around 3 inside the car cabinStops & Opening :06-06 (All opening on same side)Safety Device: (i) As per OEM design automatic rescue device (ARD) /automatic landing device to be operating with maintenance free batteries for landing as specified. Make: As per OEM specification & approved drawings.(ii) Safety governer against over speed car cabin as per norms laid down by PWD(lift) Bombay with dual safety system including mechanical & electrical. Operation : Simplex full collective automatic operation with/without attendant. Machine Room: Located above the hoist way. Hoist-way construction: RCC wall construction as existing at site internal dimension 2500 mm x 1900 mm available AC-VVVF drive shall be of as per list of Make : Microprocessor based with VVVF drive close loop type Door Shall have AC-VVVF controlled close loop operated. Face plate shape shall be rectangular and stainless steel in hairline finish. Counter weight: Made of cast iron or MS profile cut. One number wall mounted type telephone instrument of make crompton Greaves/ Beetel installed inside of car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with trailing cable. The telephone instrument shall be connected in the telephone DB installed in the machine room. One number electrically operated siren operating voltage 240 volts having audible range of 0.3 KM including independent switch inside of car cabin and connecting cables from car cabin to machine room. The siren shall be installed at appropriate place.(i) One toughened looking mirror (of best quality) of size 1100mmx 1100mm x 4 mm thick with silvered sheet frame.(ii) One number LED light to be connected with UPS for emergency lighting purpose.

Comprehensive maintenance (Routine , preventive , breakdown) (Daily, weekly, fortnightly, monthly, qtrly, half yearly, yearly maintenance) , during all type of weather/climatic condition for the any make,capacity of lifts type (geared or gearless, Auto or manual operated with or without VVVF drive system, with or without ARD system etc), maintaining the lift and connected equipments and accessories etc in serviceable condition round the clock (on all days including holidays), also maintaining the necessary documents and repair of fully automatic electriclly operated passenger lift of any make & 08 / 13 passanger capacity installed against Sch 'A' item Nos 02 and 04 here in before in building No NS-88(Sarawati) NS-122 (Sabarmati) respectively comprising of all devices and accessories through out 12 months on all days including sundays and holidays for period of four years after expiry of defect liability period as shown below NOTE : Cost of all the maintenance,repairs and including replacement of components and parts that too for the specific lifts as indicated therein to keep the lifts in perfect serviceable condition shall be deemed to be included in the quoted rate of the contractor. The contractor shall be responsible for handing over the lifts in serviceable condition at the time of completion of works. The payment for replacement of parts/components expenditure upto Rs 1500/ is deemed to be included in the quoted rate

First year (twelve months after expiry of defect liability period)

Second year ( twelve months after comnpletion of 5.01 above)

Third year ( twelve months after comnpletion of 5.02 above).

Fourth year ( twelve months after comnpletion of 5.03 above).

Manning & Operation of fully automatic electrically operated passenger lift of any make 08 and 13 passeger capacity installed against Sch 'A' item Nos 02 &04 here in before in building No NS-88(Saraswati) NS-122 (Sabarmati) respectively in two shifts of 08 hours duration each operator per shift for each lift i.e from 0600 hrs to 1400 hrs & 1400 Hrs to 2200Hrs throughout 11 months on all days including holidays with providing rescue to the trapped person, maintaining the lift and connected equipments and accessories including lift room in clean and tidy condition during the operation period and also Manning & Operation of Lift in case of failure of commercial supply by running of DG Set installed within the vicinity meant for lift supply.complete all as specified and directed by GE. Notes : (a) Quoted Rate shall be deemed to include to provide one alternative employee (reliever) to provide the services, so that the other employee can avail the facility of weekly leave etc. (b) Cost of all the maintenance,repairs and including replacement of components and parts upto Rs 1500/- that too for the specific lift as indicated therein to keep the lifts in perfect serviceable condition shall be deemed to be included in the quoted rate of the contractor. The contractor shall be responsible for handing over the lifts in serviceable condition at the time of completion of works.

First eleven Months after completion of work.

Eleven Months after completion of 6.01 above

Eleven Months after completion of 6.02 above

Eleven Months after completion of 6.03 above

Eleven Months after completion of 6.04 above

FIVE Months after completion of 6.05 above . Notes for item No 5.0 to 6.06 : (i) The work covered under this schedule will be ordered on the contractor by the GE every year through a separate work order at the rates quoted by the contractor. (ii) The comnprehensive maintenance shall be for a period of 48 months wef satisfactory completion of defects liability period for the equipments installed and manning and operation shall be for a period of 60 months including defect liability period. (iii) The contractor shall be responsible for periodical maintenance, including renewal/ replacement of parts, etc required for smooth functioning of the system as per OEM instructions (iv) Any increases in wages of labour during this period shall be incluuded in quoted rates , tenderer shall consider their own assuptions for labour rates of this periods . Nothing is extra admmissible on this accounts

Escon Elevators Pvt Ltd

Veer High Tech Solution