Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹40.8 L+₹3.0 L (7.82%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹46.4 L+₹8.6 L (22.8%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹49.5 L
EMD Value
₹99,900
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-64/2022-2023 SPL REPAIR TO BATHROOM CHAJJA INTERNAL FINISHES AND OTHER SANCTIONED WORKS UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_553874_1
GE/CHM-64/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹99,900
Yes
13 Dec 2022
23 Sept 2022
7 Nov 2022
23 Sept 2022
31 Oct 2022
17 Oct 2022
Amount
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, complete all as specified & directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, complete all as specified & directed.
Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, complete all as specified and directed.
40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and fair complete all as specified and directed.
Glass dividing strips, 3mm thick, 38mm wide complete all as specified and directed
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters (without taking off shutters from the frame), complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each , all as specified & directed.
Taking down shutters of any description, area exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete ,all as specified and directed.
Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete, all as specified & directed.
Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 as grating over drain etc, complete all as specified & directed
Factory made flush shutters 25mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, ISI marked,complete all as specified.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 125 mm long, ISI marked,complete all as specified.
Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed with screws or with welding , ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Door stopper of aluminium alloy body and tongues anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.
Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed as in repair to wooden shutter or steel windows with necessary fittings complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, all as specified and directed.
Steel window as in repair, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 31 hereinbefore but without glazing bar.
Steel ventilator factory made with top hung shutter including hinges, steel peg stay, fixed as in repair complete all as specified and directed.
Machine cut Kota Stone Slab flooring, 18 to 22mm thick, best quality (minimum size 55cm x 55cm) over and including cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.
Machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified.
Demolition of cement concrete on any description and in any position (in sunken portion) or not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m form the sie and depositing where directed complete all as specified and directed.
Steel water tubes, 50mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors or as in spouts, complete all as specified and directed.
Providing cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in roof kerbs rounded or chamfered mixed with and including Fosroc Conplast WL @ 125ml per 50 Kg cement bag complete all as specified and directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface . (b) Applying cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and allowing the surface to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and allowing the surface to air cure for 4 hours. (d) Curing the sunken portion with water minimum for 48 hours by ponding. (e)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound .
Lime concrete with 40mm graded brick aggregate with lime mortar 1:3 depostied spread and levelled in layers n.exc 25cm watered & rammed to a true surface complete all as specified and directed.
Plain cement concrete 1:2:4 type B-1 uisng 20mm graded stone aggregate 75mm thick for floor, admixing Fosroc Conplast WL @ 125ml per 50Kg cement bag including top coating using Fosroc Nitobond SBR, mix ratio 1:1½ all in complete as per manufactures specifications complete all as specified & directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the MOD land,complete as specified and directed.
Glazed coloured ceramic tiles in vertical surface 450mm x 300mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.
25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
Non skid ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Coloured vitrified ceramic tiles, light shade, jointless, 10mm thick (square ) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), compound complete all as specified.
Supply only liquid water proofing compound (ISI Marked) complete all as specified & directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directed. NOTE : Rates deemed to be included all necessary scaffolding arrangement for upto 03 storey bldg
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, including complete removal of existing treatment complete all as specified and directed.
Preparation of new plastered surfaces of walls, applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified.
Two coats of white wash on ceiling / chajja surfaces including preparation of old plastered or unplastered surfaces complete all as specified and directed
Three coats of white wash on ceiling / chajja surfaces including preparation of new surfaces complete all as specified and directed
Two coats of white wash on Wall surfaces including preparation of old plastered or unplastered surfaces complete all as specified and directed
Three coats of white wash on new plastered surfaces of walls including preparation of surfaces complete, all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Preparation of old steel and iron surfaces and applying two coats of synthetic enameled paint , complete all as specified & directed.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Steel water tubes, 15mm dia bore, concealed, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.
All as per item No. 70 hereinbefore but except GI pipe 15mm bore
Steel water tubes, 20mm dia bore, concealed, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.
All as per item No. 72 hereinbefore but except GI pipe 20mm bore
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 25mm bore pipe (minimum weight 455gms ), fixed as in repair complete all as specified and directed.
20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Bib cock short body, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Bib cock short body, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Stop valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Towel rail, 20mm dia, 60cm long cast copper alloy chromium plated , fixed in repairs, complete all as specified and directed.
15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.
32mm dia waste coupling / waste fitting of PTMT any colour (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
PVC waste pipe suitable for 32mm dia waste coupling ,fixed as in repair, complete all as specified & directed by Engineer-in-charge.
swivel shower of PTMT any colour with 15mm pipe (minimum weight 40gm), with shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT (Minimum weight 40gm ) fixed as in repair complete all as specified and directed.
shelf of PTMT 450mm x 124mm, any colour (minimum weight 300gm) fixed with and including chromium plated brass screws and wooden / plastic cleats fixed in repair complete all as specified and directed
Soap dish, vitreous china, white, approximate size 160mm x 160mm x 90mm complete all as specified and directed.
PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.
PVC connection 450mm long for cold / hot water heavy duty made out of double layer Nylon & wire fabric at pressure 6 Kg /cm both side, CP brass 15mm bore coupling or nuts complete all a specified and directed.
Dismantling of 100mm cast iron pipes with all fitting and fiixing acessories, jointed in cement mortar complete all as specified and directed.
PVC (SWR) pipe, Type B, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.
PVC (SWR) pipe, Type B, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.
110mm bore PVC (SWR) bends any radius, with or without door acces complete all as specified and directed
75mm bore PVC (SWR) bend any radius, fixed as in repair complete all as specified and directed
110mm bore PVC (SWR) vent cowl complete all as specified and directed.
110mm bore PVC (SWR) WC connector bent type complete all as specified and directed
110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
Demolition and breaking up AC rain water pipes 100mm dia in cement mortar complete all as specified and directed
50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete
PVC (SWR) floor trap of 75mm bore, plain with grating including jointing with solvent cement, fixed in repairs, all as specified and directed.
Grating round 100 mm with or without hole of PTMT (Minimum weight 25 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, fixed as in repair, complete all as specified and directed.
Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor ,fixed in repairs, complete all as specified & directed by Engineer-in-charge.
Wash down water closet pan, Pedestal pattern, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set, fixed as in repair, complete all as specified and directed.
Hand shower (health faucet), chromium plated for 15mm bore with fittings and 1 metre long flexible tube and wall hook, fixed as in repair complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC flush pipe (long type for squatting pan), fixed as in repair, complete all as specified & directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including angle brackets, fixed as in repair, complete all as specified and directed.
Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.
Reinforced cement concrete (1:1.5:3), nominal mix, type A-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately
Reinforced cement concrete 1:1½:3 (nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, all as specified and directed . Note : Reinforcement and form work shall be measured and paid separately
Reinforced cement concrete type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed Note : Reinforcement and form work shall be measured and paid separately
Mild steel high strength deformed TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
Mild steel TMT bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips as in stirrups, spacers and binders , all as specified.
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.
Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintels etcrough finished surface of concrete flat complete all as specified and directed.
15-18mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on cooking platform, counter slab etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:6 including cutting / rounding of edges where requried complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.
Viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified & directed by Engineer-in-charge.
Cleaning removing of all waste material, sludge, silt , mud and garbage and vegitation etc from shafts of toilet block sewerage shaft and removing of all waste materials exc 250 Mtrs but not exc 500 Mtrs and repair of plaster, flooring, pointing brick work ad plumbing work etc in shaft in fowl condition as directed . NOTE : Plumbing, flooring, plastering etc will be measured and paid separately in respective items)
Dubbing out average 10mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 inclduing taking down loose plaster complete all as specified and directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Plain cement concrete 1:3:6 type C-1 as in roof padding, terraces and in other similar locations as per site requirement , complete all as specified and directed.
Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing not less than 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions complete all as specified & directed.
40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.
All as per item No 134 here-in-before but except tiles.
100mm thik plain cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
75mm thik plain cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Preparation of old decorated plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed.
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates (wall thickness of aluminium section not less than 2mm) including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.
Powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium partition/ door /window/ventilator shutters made of aluminium sections (wall thickness of aluminium section not less than 2mm) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and panels shall be measured & paid separately under respective items as "Supply only" . Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
12mm thick pre laminated particle board (ISI Marked), exterior grade, pre laminated both side with decorative choice lamination and other side balancing white lamination, fixed with beading to aluminium frame work as in panel of shutter / built in locker after taking out old board, complete all as specified and directed .
Toilet paper holder, cast copper alloy, chromium plated, fixed in position in repairs, complete all as specified and directed.
Urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Counter top basin (Premium Quality), size 600mm x 400mm x 175mm, complete all as specified and directed . MAKE : JAQUAR Cat Part No SLS-WHT-6601 or equivalent as per appx 'C'
Urinal pot (Premium Quality), size 355mm x340mm x 535mm, complete all as specified and directed . MAKE : JAQUAR Cat Part No URS-WHT-13261 or equivalent as per appx 'C'
Auto closing Concealed Urinal flush valve with wall flange, complete all as specified and directed . MAKE : JAQUAR Cat Part No PRS-073 or equivalent as per appx 'C'
Curved shaped urinal partition with frosted glass 8mm thick chrome finish size 909 x 450mm , complete all as specified and directed . MAKE : JAQUAR Model No. 1810-UC / 1110UC Cat Part No JSE-CHR-810UC450X or equivalent as per appx 'C'
Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 25 cm watered & rammed to a true surface with broken stone or boulders complete all as specified.
Providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Surface excavation not exceeding 30 cm deep and averaging 20 cm deep and getting out in hard/dense soil, complete all as specified and directed.
100mm thick PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep but not exceeding 3.00m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified.
CI floor trap 100mm dia with CP grating including jointing to waste pipe in cement mortar 1:2:4 complete and making good the disturbed surface to match the existing surface, complete all as specified and directed
Plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
Salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed. (excavation, earthwork and PCC shall be measured and paid for separately)
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit 20mm bore, terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
All as per serial item 165 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed
All as per serial item 165 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 165 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Sockets outlet multipurpose 2 in 1 pin, 6 Amps flush type ISI marked all as specified and directed
Sockets outlet multipurpose 2 in 1 pin, 6/16 Amps flush type ISI marked all as specified and directed
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting including complete all as specified and direted.
9 watts LED lamp complete all as specified and directed.
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed .
MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed.
MCB, SPN, 240 volt, 40Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB, SP , 240 volt, 6Amps to 32Amps, 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete , all as specified and directed.
LED CRCA batten with decorative end cap complete with and including retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed.
Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed.
Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separtely
25 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, Complete all as specified and directed .
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed .
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.
Metalic body exhaust fan 225mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 1350 to 1400 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan
Cutting openings, through brick walls in round shape , for 225mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.
Electric water storage heater (vertical type geyser) 25 ltr 230 volts AC single phase with and including stainless steel tank, heating element upto 2 KW heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt etc as per site requirement, making necessary inlet / outlet water connection and electric connection, testing on load for full satisfaction of Engineer-in-Charge
Non return valve (brass) 15mm bore size fixing in inlet waster pipe of geyser complete all as specified and directed
Premier Constructions
KUNDRA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .