PERIDICAL SERVICES AND OTHER B/R REPAIRS TO EM INSTALLATION AND OTHER MISC WORKS AT AFS CHAKERI KANPUR AND 7 AFH KANPUR CANTT

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed .

M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engineer in Charge.

M&L for Brick work using old sub class 'B' bricks straight or curved on plan not exc 6.0 mtr mean radius built in cement mortar (1:6) , including necessary cleaning of bricks as obtained old serviceable brick obtained from item no-01 complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key scrubbing down with water etc. complete all as directed by the Engineer-in-Charge

M&L for rendering 5 mm thick in cement mortar (1:3) on ceiling of brick or concrete surface, finished even and smooth without using extra cement complete all as directed by the Engr-in-Charge.

M & L for rendering 15mm thick in cement plaster (1:6) on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as directed by the Engr-in-Charge.

M & L for rendering 15mm thick in cement plaster (1:4) mixed with integeral water proofing compound on external / exposed surface of fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as directed by the Engr-in-Charge. (Note: Water proofing compound shall be measured & paid seperetely)

M&L for preparing the newly plastered surfaces of wall and applying two coats of cement base paint on walls complete all as specified and direcrted.

M&L for three coats of white wash on new plastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing old plastered surfaces and applying one coats of cement base paint on walls all as specified and direcrted by Engineer in Charge.

M&L one coat of white wash on old decorated / plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed Engineer in Charge.

Complete removal of existing old treatment and preparation of old surface of walls complete all as specified and directed.

M&L for applying 2mm thick (average thickness) wall care (water proof ) putty on wall to have surface even and smooth complete all as specified and directed.

M & L for applying two coat of oil bound distemper (1st quality) over a coat of primer on wall complete all as specified and directed.

M&L preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper (1st quality) complete all as specified and directed .

M&L for treating of ground surface around the installation by spraying weed / grass / bush removal chemical (ISI mark) of dose 1.30 ml /sqm with require water chemical ratio as per instruction given by brand manual complete all as specified and as directed.

M&L for preparing the surface by removing old paint from complete exposed surface of LT panels by paint remover, cleaning by scrapping and applying two coats of 1st quality synthetic enamel paint of approved shade over one coat of red oxide primer and writing work as per existing pattern complete all as specified and as directed.( Note- Shutdown provided by the concern subdivision (AGE E/M I and AGE E/M-II) pertains to his area as and when execution required at site by the contractor.)

M&L for painting to LT street light pole sizes 9/11 mtr long pole with bracket and connected cable GI protection pipe upto terminal box by one coat of high glow aluminium paint ( by using of hardner and thinner) with brush paining after preparation of surface by rubbing of scale and dust through regmar (80 GSM) and using of cloth including writing numbering and alphabetical code on pole and three number alternative circular strip bend prepare in sky colour in 50 mm width at the base of pole complete all as specified and directed.( Note- Shutdown shall be provided by the concern subdivision (AGE E/M I and AGE E/M-II) pertains to his area as and when execution required at site by the contractor)

Cutting/trimming of tree creepers/branches upto 30 cm girth which are touching of overhead line/pole,transformer,DG sets and other E/M installation equipments and disposal of timber complete all as specified and as directed.(Note- Shutdown shall be provided by the concern subdivision (AGE E/M I and AGE E/M-II) pertains to his area as and when execution required at site by the contractor.)

M & L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as directed and specified by Engr-in-Charge.

M & L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described all as directed.

Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors,aprons etc. all as directed by Engineer in Charge.

M&L for 20-25 mm thick machine cut kota stone slab in floors ,set and jointed in neat cement slurry and pointed in coloured cement including 20 mm thick Screed bed or bedding layer in CM (1:6) for laying , including half granite grinding and polishing the exposed surface to have mirror polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engineer in Charge.

M&L for 1st quality Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick(1:6) screed bed or bedding layer for laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L for 1st quality glazed coloured ceramic tiles size 300 x450 x 7mm in vertical surfaces or as required at site in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) on brick work/concrete surfaces complete all as specified and dierected

Demolition of plain cement concrete of any description over roof slab complete all as specified and as directed by Engr-in-Charge.

M & L for 25mm thick cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate mixed with water proofing compound @ 3 % by weight of cement or as recommanded by manufecturer's , surface finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge (Note:-Water proofing compound shall be measured & paid separately).

Supply only integral water proofing compound complete all as specified and as directed by the Engineer-in-Charge

Demolition of cement concrete (Unreinforced) n exe 15 cm thickness (below or above ground level) complete all as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection/sub base , finish even & smooth without using extra cement all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for sand cushioning not exc 25mm thick as filling under floors including watering and consolidation complete all as specied and as directed.

M&L for machine pressed coloured interlocking pavor block, 60mm thick PCC, M-35 grade, any shape and size confirming to IS-15658-2006 using with grey cement and pigment all as specified and directed.

S&F in repair of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fitted with cut and mitred wooden beads complete all as speficied & directed.

S & F in repair of 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads to store complete all as speficied & directed

M&L for taking up/removal plants or vegetation/debris including cleaning away all grass vegetation sapling,bush,wood under grouting,roots & tree and removing rubbish etc. from ground surface, and disposal to a distance as directed and clearing site complete all as specified and directed.

M&L for taking up/removal plants or vegetation growth on wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 5.0 sqm superfical area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coats of cement base paint to match the existing surfaces upto 5 mtr height complete all as specified and directed.

M&L for reparing of RCC chhajja, roof projection, facias and exposed reinforcement portion area n.exc 1.5 sqm each and thickness of RCC n.exc 75mm applying one coat of cement slurry reinforced with welded mesh of weight exc. 2kg per Sqm but n.exc 3kg per Sqm & filling the cement concrete (1:2:4) type B0, 12.5 mm graded stone aggregate at damaged concrete surface and finish the surface with 5mm thick cement sand mortar (1:3) & applying two coats of cement base paint on finished surface complete all as specified and directed

Taking down rolling shutters of any description not exceeding 10 Sq.m area straightening of certain springs, guide channel hood cover, etc and refixing the same to the original position including greasing/oiling i.e. complete servicing to make the shutter fully functional to the entire satisfaction of Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of Steel rolling shutters gear operated type with bevel gear box and crank handle , thickness of laths in 1.25 mm with safety lever locks mild steel with 4 levers ,ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer ,erected in position as indicated, complete all as specified and as directed.

M&L for framed work as in doors or gates,fencing of angle ,or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

Fixed in repair of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

S&F for expanded metal not exceeding 4 kg per sqm , cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing upto height 12 m height with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

Dismantling expanded metal not exceeding 4 kg per sqm , any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed.

S & F for mild steel angles , bars , flats, etc as in posts and struts in fencing including cutting tops to shape as supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting welding, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of fencing post or struts (wood, steel, RCC) any section , post embedded in concrete , brick work, masonry etc , including taking out embedded portion and making good distrubed ground complete all as specified and directed..

M & L for excavating in post holes each not exceeding 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to distance not exceeding 50m and making good surface complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 (40 mm graded aggregate) in post holes etc.complete all as specified & directed by Engineer in Charge.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Supply only MS chainlink fencing of dia of wire is 4 mm complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as directed by Engineer in Charge.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

S & F Pre-painted galvaume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified as in roof covering all as specified and directed.

Taking down steel /PVC chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc. complete all as specified and directed.

S&F single side prelaminated solid PVC door frame of size 50x 47 mm made out of 5 mm colour PVC sheet reinforced with MS tube , fixed in opening complete all as specified and directed .

S&F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) considting of frame made out of M.S tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail &bottom rail on either side & as gap insiert for top rail& bottom rail, panelling of double side prealm PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-charge.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed by Engr-in-charge.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and as directed by Engr-in-charge.

S&F Aluminium handles extruded type ,anodised of 150 mm size complete all as specified and as directed by Engr-in-charge.

S&F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with or without glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed

S&F 3.5 mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed

S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Taking down Shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as directed by Engineer in charge

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as directed by Engineer in charge.

S&F IInd class hard wood plain solid straight chowkhats and frames wrought frmed rebated on solid rounded or chamfered put together with glue pinned at joints,complete all as specified and as directed by Engr-in-charge.

S&F for flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed at site all as specified & directed by Engineer in charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/lintel, hold fast, PCC Bed blocks including finished all exposed surfaces of concrete incl necessary form work etc,complete all as specified and as directed by Engr-in-charge.

M&L for MS work such as hold fast etc with end of bars shouldered and/ or reveted or forged in to spikes framed guard bars barred iron doors ; ladders; framed balusters, walk ways railing, framework of water tanks and simillars works conforming to Fe-290 complete all as specified and directed.

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel , ISI and fixed complete all as specified and directed.

S&F 200 mm mild steel barrel tower bolts, stove enamelled black, ISI marked with bright bolt and fixed complete all as specified and directed.

S&F 150 mm Mild steel pressed handles, oval type, stove enamelled blackcomplete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, ISI marked clip type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

M&L for preparation of new wooden/ wood base surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for refixing and removal to store all as directed by Engineer in Charge.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for refixing and removal to store all as directed by Engineer in Charge.

S & F 15 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealed complete all as specified and directed by EIC.

S & F 20 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc any position i.e concealed complete all as specified and directed by EIC.

Refixing old steel tubing of 15mm bore and connections in new or old position (walls,cellings, floors etc.) complete all as specified and directed by EIC.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, cellings, floors etc.) complete all as specified and directed by EIC.

S&F in repair gun globe or gate valve for 15 mm bore pipe with iron wheel and screwed both ends for iron pipes all as specified and as directed.

S&F in repair gun globe or gate valve for 20 mm bore pipe with iron wheel and screwed both ends for iron pipes all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC low level dual flush cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. Make Prayag cat Part No 502 DUO or equivalent

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor excluding flushing cistern and flush pipes complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600/900 mm long all as specified and directed by Engr-in-charge.

S&F in repair 32 mm waste coupling of PTMT half or full threaded min wt 45 gm all all as specified and directed .

S&F in repairs PVC waste pipe 32/40 mm dia, 800 mm long, complete all as specified, Cat No 3271, Make Prayag or equivalent make as specified and directed by Engr-in-charge.

S&F in repair 125mm/ 150mm dia PTMT grating with or without waste hole fixed on floor trap / nahni trap with white cement all as specified and directed

S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minmum weight 210 gms). complete all as specified and as directed

S&F in repair 500 ltr rotatational moulded polyethylene white colour water storage tanks(cylindrical vertical with closed top) triple layer construction, arrangement to screwed the lid cover, ISI mark hoisted& fixed in position complete all as specified and as directed.

Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes, etc capacity exe 250 lt but nexe 500 lt,complete all as specified.Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint.

S& F in repairs pillar taps 15 mm dia of PTMT any colour scewed for iron pipe ans fixed (Min Wt 110 Gms).complete all as specified and as directed.

S&F in repairs Bib taps standard of PTMT,15 mm dia any colour screwed for iron pipes (Min Wt 90Gms),directed.

S&F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms).

M/S UNIQUE ENTERPRISES (BID ID -3105319)

M/S KALI CHARAN PANDEY AND CO. (BID ID -3100387)

shanti trading company (BID ID -3120394)

DHARM ENTERPRISES (BID ID -3108893)