Construction of link road from Bhaloh to Bhalola on Takka Dathwara road Abadi Jhingra i/c 4Nos. Bridges

Amount

Earth work in excavation for foundation of bridge structure in all type of classification of soil comprising of ordinary rock, hard rock, chiseling/ wedging out of rocks (where blasting in prohibited) as per drawing and technical specification MORD 2014 Clause 304 upto any depth and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto all leads and lift, including dressing of sides and bottom including shoring and strutting and pumping , bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Earth work in excavation for all type of bridge structure and in R/Wall etc. in all classificationof soil as per drawings technical specification MORD 2014 and as per direction of the Engineer- in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth such as pick work Jumper work blasting work and any quantam of water including cleaning of slush which may arrise out during dewatering Mechanical Means as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 meter and a lead upto 20 m as per Technical Specification MORD 2014 Clause 1603.1and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of un useful material for filling in road ways, camber, embankments for grade improvements and disposal of all unuseful material to required width of the road or on approved dumping sites by Engineer-in-Charge through all modes of transportation including head load or animal transport or mechanical means along with its levelling, fine dressing and carriage of machineries, materials, tools, equipements and safety measures and incidentals necessary to complete the work by mechanical means and or /labour if required. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per the direction of Engineer- in- charge including carriage of material with in all leads and lifts.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. A recovery of useful stones for 14.07(Fourteen decimal zero seven) cubic metre at the rate of Rs 300/- (Rupees three hundred ) per cubic metre shall be effected on prorata basis in each running bill for this item.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. 2014 technical specification clause 305.1 and as per direction of the Engineer- in- Charge including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Construction of embankment with approved materials obtained from borrow pits deposited at site from road way, excavation of other road structures or other sources laid in layers of suitable thickness not exceeding 200mm( two hundred millimeter) and compacted with 80-100 (eighty-hundred)KN.static/ vibratory road roller to meet the requirements of Techanical specifications MORD 2014 clouse 301 to lines,grades,level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including handling of materials for construction of embankment within all leads and lifts.The rate shall include carriage of machineries, equipment, tools and materials and safety measures, as per direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentials.The rate including octori, royality, malkana, toll tax, Goods Service tax ,Labour cess ,or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated Cement concrete for plain/ reinforced Cement concrete in foundation of bridge structure or toe walls of Box Cell etc. complete (M-10) design mix crushed stone aggregate 40mm ( forty millimeter nominal size) on ground or under water and curing for 14 (fourteen) days complete with in minimum Cemant Content not less than 230 kg. per Cubic meter (Two hundred yhirty kilograme per cubic metre) including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated Cement concrete for plain/ reinforced concrete in Sub Structure of bridge complete of plain concrete mix designed mix to obtain minimum compressive strength of grade M-20 ( M twenty ) as per MORD 2014 technical specification vide section 800 & 1200 with minimum cement content not less than 350 kg. per cubic meter (Three hundred fifty kilograme per cubic meter) on ground or under water including curing complete including pumping or bailing out water , dewatering, removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in abutments etc. as per drawings and technical specification and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing Furnishing and placing mechanically mixed and vibrated concrete for plain/ reinforced concrete in super structure/any height of bridge structure complete of plain/ reinforced concrete designed mix as per MORD 2014 technical specification section 800 & 1400 to obtain minimum compressive strength of grade M-30 ( M thirty ) with minimum cement contents of 407 kg.(four hundred seven kilogram) and curing complete for all heights/ depths including the cost of form work in deck slab etc. as per drawings and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive octori ,royality, malkana, toll tax, Goods Service tax ,Labour cess, or other taxes imposed by the Govrnment.

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and MORD 2014 technical specification clouse 1001, including cutting ,bending, binding and placing in position complete in all respect including cost of binding wire upto all heights as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MORD 2014 technical specification clouse 1001, including cutting ,bending, binding and placing in position complete in all respect including cost of binding wire upto all heights as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work 1:4:8 ( one cement: four sand: eight graded crushed stone aggregate) 40mm (forty millimetre) nominal size crushed stone aggregate in open foundation mechanically mixed and vibrated including curing complete, including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. 2014 technical specification Clause 802,803,1202 and 1203 as per the direction of the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidential . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Back filling with granular material behind return wall, abutment, wing wall and retaining walls complete as per drawing and MORD 2014 technical specifications clause 1204.3.8 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing weepholes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeters) dia PVC pipeOF MAKE D-PLAST/ POLY.having pressure of 4.0 kg per square meter extending through the full width of the structures with slope of 1(V):20(H) (one vertical : twenty horizontal) towards drawing face complete as per drawing and MORD 2014 technical specification clauses 614, 709, 1204.3.7 as per direction of Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate including octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications as per direction of Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate including octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Furnishing and placing mechanically mixed and vibrated concrete for plain/ reinforced concrete in sub structure/any height of bridge structure complete of plain/ reinforced concrete designed mix as per MORD 2014 technical specification Section 800 & 1200 to obtain minimum compressive strength of grade M-30 ( M thirty ) with minimum cement contents of 407 kg.(four hundred seven kilogram) and curing complete for all heights/ depths including the cost of form work in abutments and piers cap , Bed Plate , dirt wall etcetera as per drawings and MORTH specification clause 1500,1700,2200 and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive octori ,royality, malkana, toll tax, Goods Service tax ,Labour cess, or other taxes imposed by the Govrnment.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in approach slab as per drawing and MORD 2014technical specification Section 800 & 1400 grade M-30 (M-thirty) standard design mix to obtain the minimum crushing strength of 30N/mm2 (thirty Newton per millimetre square) with cement contents should not be less than 407 Kg (four hundred seven kilogram) per cubic metre and curing complete including cost of form work and reinforcement complete as per drawings, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete wearing coat in cement concrete grade M-30 (M-thirty) standard concrete design mix to obtain the minimum crushing strength of 30N/mm2 (thirty Newton per millimetre square) with cement contents should not be less than 407 Kg (four hundred seven kilogram) per cubic metre and curing complete, including cost of form work and reinforcement complete as per drawing and as per MORD 2014 technical specification clouse 1404.2.2 to 1404.2.5 and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Construction of reinforced cement concrete precast railing of cement concrete mix designed to obtain the minimum compressive strength of grade M-30 (M-thirty) with aggregate size not exceeding 12mm (twelve millimetres) and curing complete, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 ( one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm ( two thousand millimeter) resuming adequate space between vertical post for expansion, including the cost of reinforcement and form work as per drawing and technical specifications MORD 2014 clouse 1404.3 including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing MORD 2014.5 technical specifications MORD 2014 clouse 1404.5 and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Providing and laying of an elastomeric slab steel expansion joint, catering to right or skew (less than 20 deg., moderately curved with maximum horizontal movement upto 50 mm, complete as per approved drawings and standard MORD 2014 specifications vide Section 1403 to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation and clause 2606 of MoRTH specifications for road & bridge works. as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Providing and filling joint sealing compound as per drawings and MORD 2014 technical specifications Section 1403 with coarse sand and 6 per cent bitumen by weight as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 square meter. as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Providing Wire Crates with 4mm dia GI Wire conforming to MORD 2014 technical specification clouse 1301 vide table 1300.1 IS :280 and IS:4826 in 100mm x 100mm mesh (woven diagonally) including 10 percent extra laps and joints laid.with stone boulders weighing not less than 40 kg. (Forty kilogramm) each as directed by the Engineer- in- Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all lifts and leads ,transporting to site, spreading grading to required slope and compacted to meet requirement of table 300.2 with in all lead and lift as per MORD 2014 technical specification clause 303.1 including carriage of materials within all leads and lifts and other incidential . The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Construction of gravel/soil aggergate sub base/base by providing well graded material of nominal maximum size grading 80mm & MORD 2014 technical specification 401 vide table no. 400.1-A, 400.1-B, 400.1-C as per table 2.3 of IRC SP 77-2008, Spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount approriate rotavator attachment and compaction with three wheel 80-100 KN Static roller capacity to achieve the desired density complete as per specifications contained in Para 2.2,3.6 and 3.7 of IRC SP 77-2008 including carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , goods service tax, labour cess or other taxes imposed by the Government.

Providing ,laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/ base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100KN (Eighty to one hundred kilo newton) weight to achieve the desired density including lighting barricading and maintenance of diversion etc. MORD 2014 technical specification clause 406 as per table 400.11 & 400.12.including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and applying evenly a primer coat with bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg (zero point eighty five kilogram) per square metre using mechanical means as per MORD 2014 technical specification clause 502 and as per direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.275 kg.per sqm (Zero point two hundred seventy five kilogram) per square metre.on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per MORD 2014 technical specification .clause 503 including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimetre) thickness composed of 13.2mm ( thirteen decimal two millimetre) to 5.6mm ( five decimal six millimetre) size aggregate at the rate of 0.27 cum(zero point two seven cubic metre)mixed with penetration grade bitumen binder VG-30 at the rate of 14.6 kg. per ten square metre and laying with paver finisher to required line grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a three wheel 80-100 ( eighty to one hundred )KN static road roller capacity finished to required level and grade to be followed by seal coat of either typeA or type B or type C mechanically as per MORD 2014 technical specifications clause No. 506 (Bitumen VG-30 ) as per the entire satisfaction and direction of Engineer – in- Charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using type B at the rate of 6.8 kg (six point eight kilogram)per ten square metre mixed with crushed sand defined as passing 2.36mm sieve at the rate 0.06 cum (zero decimal zero six cubic metre) per ten square metre as per MORD 2014 technical specification clause 508 By mechanical means type B Bitumen (VG-30) as per the entire satisfaction and direction of Engineer – in- Charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Construction of un-reinforced dowel jointed at expansion and construction joint only plain cement concrete pavement thickness as per design over a prepared sub base with 43(forty three ) grade cement or any other type as per clause 1501.2.2 M-30(grade) cement contents not less than 400 ( four hundred kilogram) kg per cubic metre coarse and fine aggregate confirming to IS 383 (three hundred eighty three ) in ready mix cement concrete weigh batching plant of capacity 15 to 20 cubic metre and transportation through transit mixer using approved mix design,laid in approved fixed form work (Steel channel laying and fixing of 125 (one hundred twenty five ) micron thick polyhene film wedges ,steel plates including levelling the form work as per drawing) spreading the concrete with shovels rakes compacted using needle screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , construction joint applying debonding strips ,primer,sealant dowels bars near approaches to bridge/ culvert and construction joints admixtures as approved curring of concrete slabs 14(fourteen) days using compound (where specified) and water finishing to lines and grade as per drawing and technical specifications clause 1501 including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and erecting precast reinforced cement concrete M-15 (M-fifteen )grade 200 mtr (two hundred metre ) stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and MORD 2014 technical specification clause 1703 including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and erecting precast reinforced cement concrete M-15 (M-fifteen) grade boundary pillars/ local stone of standard design as per IRC:25, fixed in position including finishing and letttering but excluding painting as per drawing and MORD 2014 technical specification clause 1704 including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax, octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing of retro- reflective cautionary , mandatory and informatory sign board tringular as per IRC :67 made of encapsulated lens type refective sheeting 1.5mm( one point five millimetre ) thick MS sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimetre ) width and required letters and figures with reflective tape engineering grade as per MORD 2014technical specification clouse 1701 vide table 1700.1 & 1700.2 for rural roads of required shade and colour supported and welded on 47mmx47mmx12SWG (forty seven millimetre into forty seven millimetre into twelve SWG) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600mm ,(four hundred fifty into four hundred fifty into six hundered millimetre ) below ground level as per approved drawing clause 1701.2.2- including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

a) Retro- reflectrorised Traffic Signs 900x900 x 900mm ( nine hundred into nine hundred into nine millimetre ) tringular

b) Speed Limit Sign 600mm dia Circular

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide MORD 2014 technical specification Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD 2014 Technical Specification Clause 1701. Direction and Place Identification signs with size 900x600mm (nine hundred into six hundred millimetre ) including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide MORD 2014 technical specificationClause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD 2014 Technical Specification Clause 1701. Direction and Place Identification signs with size 1200x900mm (one thousand two hundred into nine hundred millimetre ) including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre )thick including reflectorising glass beads @ 250 gms ( at the rate of two hundred fifty gram per square metre )per sqm area, thickness of 2.5 mm(two point five millimetre ) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.including carriage of materail within all leads and lifts The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing cat eye make)(3M) of size 100x20mm made of heavy duty body shall be moulded dual shank ASA /Acyclic styrene acyloretrite ) or HIP/High impact polystyrene) or ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm. of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-873 part 4:1973 The stud shall be fixed to the road surface using adhesive conforming to IS as per procedure recommeded by the manufature complete.including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.The rate are excluding GST.

Providing and fixing of road stud 100 x 100 mm ( one hundred into one hundred nillimetre) die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm ( thirty millimetre) upto a depth of 600 mm ( six hundred millimetre) and bedded in a suitable bituminous grout or epoxy mortar, all & MORD 2014 technical specification clouse 1707 vide table 1700.6 & 1700.7 as per BS:873 (Part 4) 1973., including carriage of materials with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Provision of 15No,s rumble strips covered with premix bituminous carpet , 15 - 20mm (fifteen - twenty millimeter) hight at center, 250mm (two hundred fifty millimeter) wide placed at 1.00 meter center to center at approved locations to control speed , marked with white strips of road marking paint. Taking output 100 square meter ( including gaps) including carriage of materials with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Parapet with PCC M-10 (M-Ten)for Nominal mix 1:3:6(one Cement three sand six stone aggregate )40mm nominal size Design mix as per drawing & MORD 2014 technical specifications clauses 800 and 1208.4including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

umesh sharma

PRG INFRASTRUCTURE