Loading
Loading…
Loading…
Tender Value
₹69.4 L
EMD Value
₹1.4 L
Closing Date
15 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
ELECTRICAL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Tenderer should have satisfactorily executed any one or combination work of a)Erection & commissioning of 11 KV overhead lines. b)Erection & commissioning of 33 KV overhead lines. c)Installation & commissioning of 11 KV substations. d)Installation & commissioning of 33 KV substations. e)Commissioning & laying of electrical cabling works of 11 KV. f)Commissioning of laying of electrical cabling works of 33 KV.
32 conditions · 10 needing a document upload
Form-12A, Sheet 1 to 5: Have you submitted Form-12A, Sheet 1 to 5 i.e. Tenderer's Credentials with details for OHE
Form-24: Have you submitted Form-24 i.e. Bank details in the proforma to facilitate e-payment via NEFT/RTGS etc
Form-28: Have you submitted Form-28 i.e. format for Affidavit in case of Two Packet System of tendering
Have you attached the digitally signed copy of tender document
Upload Scanned receipt copy of payment of Bid Security. Full details para 5.0 of GCC-April 2022.
Furnish the Audited balance sheet duly certified by the Chartered Accountant for last three years.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Modification of existing 33 KV OH Power Line Track Crossings (4-nos) by replacing with HT Cable running over OHE structures at different locations in between GDRA- NPML stations of PDPL-LPJL sections (Group 206) of South Central Railway under Railway Electrification Project/Secunderabad.
RESC-EL-PLC-206-26-27-06~CORE
RESC-EL-PLC-206-26-27-06
Open
Works - General
4 Months
Hyderabad, Telangana
₹0
₹1.4 L
11 Aug 2026
11 Aug 2026
1 Sept 2026
62 items across 4 schedules · ₹69,43,732.59 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Excavation of pits of size 700 mm X 700 mm X 1500 mm deep and supply of Double pole structure by pre- stressed cement concrete poles of 9.1 meters long 200 KG working load of each with top section 115 mm X 105 mm and bottom section 315mm X 105mm with cement concrete mixture, coping and including pin/disc insulators with channels, angles, clamps, bolts, nuts etc., as per approved drawing etc. Material rate | Numbers | 8.00 | 12,267 | 98,136 |
| 2 | Excavation of pits of size 700 mm X 700 mm X 1500 mm deep and erection of Double pole structure by pre- stressed cement concrete poles of 9.1 meters long 200 KG working load of each with top section 115 mm X 105 mm and bottom section 315mm X 105mm with cement concrete mixture, coping and including pin/disc insulators with channels, angles, clamps, bolts, nuts etc., as per approved drawing etc. Erection rate | Numbers | 8.00 | 1,673 | 13,384 |
| 3 | Excavation of pit of size 700mm X 700mm X 1500mm deep and supply of strut with pre- stressed cement concrete pole of 8.0 meters long 200 KG working load with top section 145 mm X 85 mm and bottom section 275mm X 85mm with cement concrete mixture and coping as per approved drawing etc., Material rate | Numbers | 16.00 | 2,607 | 41,712 |
| 4 | Excavation of pit of size 700mm X 700mm X 1500mm deep and erection of strut with pre- stressed cement concrete pole of 8.0 meters long 200 KG working load with top section 145 mm X 85 mm and bottom section 275mm X 85mm with cement concrete mixture and coping as per approved drawing etc., Erection rate | Numbers | 16.00 | 356 | 5,696 |
| 5 | Supply of single Guy arrangement with Guy wire of size 7/2.50mm,clamp, turn buckle, stay insulator, end making of Guy wire, anchor rod and plate with anchor assembly etc, Material rate | Numbers | 8.00 | 1,496 | 11,968 |
| 6 | Erection of single Guy arrangement with Guy wire of size 7/2.50mm,clamp, turn buckle, stay insulator, end making of Guy wire, anchor rod and plate with anchor assembly etc, Erection rate. | Numbers | 8.00 | 204 | 1,632 |
| 7 | Excavation of cable trench in ordinary soil of size 450 mm width x 1250 mm deep and making original arrangement after laying of the cable. | RM | 200.00 | 50 | 10,000 |
| 8 | Excavation of cable trench in rocky soil of size 450 mm width x 1250 mm deep and making original arrangement after laying of the cable | RM | 100.00 | 283 | 28,300 |
| 9 | i) Excavation of cable trench for cable loop on either end structures of size 1.25 mtrs depth and 450mm width in double layer. | RM | 100.00 | 50 | 5,000 |
| 10 | ii) Supply and filling of sand in excavated trench before and after laying of UG cable with double layer Material cost. | RM | 100.00 | 20 | 2,000 |
| 11 | ii) Supply and filling of sand in excavated trench before and after laying of UG cable with double layer erection cost. | RM | 100.00 | 5 | 500 |
| 12 | iii) Supply and providing of bricks in excavated trench after laying cable and filling sand with double layer material cost | RM | 100.00 | 50 | 5,000 |
| 13 | iii) Supply and providing of bricks in excavated trench after laying cable and filling sand with double layer erection cost | RM | 100.00 | 11 | 1,100 |
| 14 | Laying, fixing, connecting and commissioning of 3 core 400 Sq. mm PVC sheathed XLPE HTUG power Cable 33 KV Grade | RM | 1000.00 | 22 | 22,000 |
| 15 | Fixing, connecting, testing and commissioning of Outdoor type [EPKT 6374] Heat shrinkable cable jointing kits suitable for 3 core 400 Sq mm 33 KV Grade XLPE HTUG Cable complete | Set | 16.00 | 2,500 | 40,000 |
| 16 | Supply of GI earth continuity wire of 6 SWG for providing earth inter connections to the cables etc., Approved make. Material rate | RM | 1000.00 | 11 | 11,000 |
| 17 | Laying of GI earth continuity wire of 6 SWG for providing earth inter connections to the cables etc., Approved make. Erection rate | RM | 1000.00 | 1 | 1,000 |
| 18 | Supply and fixing of 33 KV HT pin insulators with metal parts complete with all accessories. Material cost | Numbers | 48.00 | 240 | 11,520 |
| 19 | Supply and fixing of 33 KV HT pin insulators with metal parts complete with all accessories, erection cost | Numbers | 48.00 | 33 | 1,584 |
| 20 | Supply and fixing of 33 KV HT Disc insulators with metal parts complete with all accessories. (11 KV disc insulators 3 Nos. at each location) Material cost | Numbers | 144.00 | 449 | 64,656 |
| 21 | Supply and fixing of 33 KV HT Disc insulators with metal parts complete with all accessories. (11 KV disc insulators 3 Nos. at each location) erection cost | Numbers | 144.00 | 61 | 8,784 |
| 22 | Supply and stringing of 33 KV HT OH mains with ACSR 'DOG' conductor of aluminium size 6/4.72 mm and steel of 1/4.72 mm including binding and jumper connections etc., Material rate | RM | 400.00 | 79 | 31,600 |
| 23 | Supply and stringing of 33 KV HT OH mains with ACSR 'DOG' conductor of aluminium size 6/4.72 mm and steel of 1/4.72 mm including binding and jumper connections etc., erection cost | RM | 400.00 | 11 | 4,400 |
| 24 | Excavation of pit in all soils and supply and providing HT earthing arrangements with 3.00 mtr long cast iron pipe of 100 mm dia and 3.5 mm thick with all other connected materials and works.Earth results values are to be duly signed by SSE/RE/SC and Contractor etc, Material Cost | Each | 8.00 | 3,337 | 26,696 |
| 25 | Excavation of pit in all soils and supply and providing HT earthing arrangements with 3.00 mtr long cast iron pipe of 100 mm dia and 3.5 mm thick with all other connected materials and works. Earth results values are to be duly signed by SSE/RE/SC and Contractor etc, Erection Cost | Each | 8.00 | 455 | 3,640 |
| 26 | Erection of 6''(150mm) dia GI pipe class "B" complete with suitable size of GI couplings,clamp,bolts and nutsetc.,as per scope of work | RM | 96.00 | 135 | 12,960 |
| 27 | Laying of HDPE pipe (High density Poly- ethylene) pipe of PE-100 Grade in PN-6 size 9" inner dia and outer dia of HDPE pipe 225 mm and wall thickness minimum 10.3 mm maximum 11.6 mm. Shall be laid under the track and open route in trench (end to end) including fixing of pipe fittings like bends couplings, end caps , T- bends etc, including all other connected acessories similar to make M/s. Sudhakar or any reputed make. | Metre | 1000.00 | 100 | 1,00,000 |
| 28 | Supply and provision of cable route indicators complete with all other connected materials cement concrete and other works etc. Note:(1) It should be a standard one as per specification. (2) It should have arrow mark identification in mould itself. (3) Two coats of Red oxide paint is to be applied and one coat of exterior synthetic enamel Red paint. (4) Cement concrete is to be done Material cost | Each | 24.00 | 132 | 3,168 |
| 29 | Supply and provision of cable route indicators complete with all other connected materials cement concrete and other works etc. Note:(1) It should be a standard one as per specification. (2) It should have arrow mark identification in mould itself. (3) Two coats of Red oxide paint is to be applied and one coat of exterior synthetic enamel Red paint. (4) Cement concrete is to be done . Erection cost | Each | 24.00 | 18 | 432 |
| 30 | Supply and provision of Danger Boards in Hindi / English / and Regional language on enameled steel plate with clamps, Bolts and Nuts complete with all other connected materials and works. Material cost | Each | 8.00 | 409 | 3,272 |
| 31 | Supply and provision of Danger Boards in Hindi / English / and Regional language on enameled steel plate with clamps, Bolts and Nuts complete with all other connected materials and works. Erection cost | Each | 8.00 | 56 | 448 |
| 32 | Supply and fixing of cable crossing detail board in English on MS plate of 3 mm thick with clamps, bolts, nuts etc., as per the details in the scope of work and Specification. [Screen printing] material cost. | Each | 8.00 | 409 | 3,272 |
| 33 | Supply and fixing of cable crossing detail board in English on MS plate of 3 mm thick with clamps, bolts, nuts etc., as per the details in the scope of work and Specification. [Screen printing] erection cost. | Each | 8.00 | 56 | 448 |
| 34 | supply and provision of Anti climbing device with clamps, nut and bolts with all connected materials and works. Material cost | Set | 8.00 | 409 | 3,272 |
| 35 | supply and provision of Anti climbing device with clamps, nut and bolts with all connected materials and works. Erection cost | Set | 8.00 | 56 | 448 |
| 36 | Removal and restringing of adjacent spans of existing OH lines on either sides of crossing span to the existing / newly erected terminal structure including insulators of sorts required at site. | Numbers | 8.00 | 850 | 6,800 |
| 37 | Dismantling of 33 KV HT OH Mains including guarding, insulators, cross arms etc., on Tower(M+12) single / double pole structures etc. | Each Span | 4.00 | 1,370 | 5,480 |
| 38 | Preparation and submission of completion drawings in A3 size with all relevant details and measurements of executed power line crossings and transmission power line crossings. Material cost | Set | 4.00 | 120 | 480 |
| 39 | Preparation and submission of completion drawings in A3 size with all relevant details and measurements of executed power line crossings and transmission power line crossings. Erection cost | Metre | 4.00 | 880 | 3,520 |
| 40 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. "450 mm width X 62.5 mm depth X 2.0 mm thickness | Metre | 300.00 | 1,259.2 | 3,77,760 |
| 41 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray ""bends"" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. "450 mm width X 62.5 mm depth X 2.0 mm thickness | Metre | 32.00 | 2,598.4 | 83,148.8 |
| 42 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. "450 mm width X 62.5 mm depth X 2.0 mm thickness | RM | 16.00 | 3,040 | 48,640 |
| 43 | Transportation of Railway Material Copper wire drums ,insulators, other OHE and TSS equipment / materials , steel structures, fabricated structure s1.5 M to 13 M long with cross section up to 600 mm X 600 mm and small parts steel items from any depot / project / division of Indian Railways / RE/Zones to any other depot / project /division of Indian Railways/RE/Zones to any other depot/project/division of Indian railways/RE/Zones. For Distance upto 100 KM | MT-Km | 2000.00 | 11.7 | 23,400 |
| 44 | Transportation of Railway Material Copper wire drums ,insulators, other OHE and TSS equipment / materials , steel structures, fabricated structure s1.5 M to 13 M long with cross section up to 600 mm X 600 mm and small parts steel items from any depot / project / division of Indian Railways / RE/Zones to any other depot / project /division of Indian Railways/RE/Zones to any other depot/project/division of Indian railways/RE/Zones.For Distance upto 100 KM and upto 200 KM | MT-Km | 2000.00 | 10.15 | 20,300 |
| 45 | Transportation of Railway Material Copper wire drums ,insulators, other OHE and TSS equipment / materials , steel structures, fabricated structure s1.5 M to 13 M long with cross section up to 600 mm X 600 mm and small parts steel items from any depot / project / division of Indian Railways / RE/Zones to any other depot / project /division of Indian Railways/RE/Zones to any other depot/project/division of Indian railways/RE/Zones.For Distance upto 200 KM and upto 300 KM | MT-Km | 2000.00 | 7.65 | 15,300 |
| 46 | Transportation of Railway Material Copper wire drums ,insulators, other OHE and TSS equipment / materials , steel structures, fabricated structure s1.5 M to 13 M long with cross section up to 600 mm X 600 mm and small parts steel items from any depot / project / division of Indian Railways / RE/Zones to any other depot / project /division of Indian Railways/RE/Zones to any other depot/project/division of Indian railways/RE/Zones.For Distance beyond 300 KM | MT-Km | 4000.00 | 6.45 | 25,800 |
| 47 | Loading of Material in Road Truck/Trailer /Rail Wagon by any means i.e Road Crane , manpower, tool and plants etc. | Per Unit | 3.00 | 4,406.4 | 13,219.2 |
| 48 | Unloading of Material in Road Truck/Trailer /Rail Wagon by any means i.e Road Crane , manpower, tool and plants etc. | Per Unit | 1.00 | 4,406.4 | 4,406.4 |
| 49 | Supply, Fabrication and fixing of Galvanized Horizontal cross arms, Galvanized clamps, drilling of holes, bolts, nuts and washers etc. Material rate | MT | 2.00 | 31,426 | 62,852 |
| 50 | Supply, Fabrication and fixing of Galvanized Horizontal cross arms, Galvanized clamps, drilling of holes, bolts, nuts and washers etc. Erection rate | MT | 2.00 | 2,000 | 4,000 |
| Schedule total | ₹12,74,134.4 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
ACS-1.pdf
ATTACHMENT
ACSNo_2.pdf
ATTACHMENT
ACS-3.pdf
ATTACHMENT
ACS-4.pdf
ATTACHMENT
ACS-5.pdf
ATTACHMENT
ACS-6.pdf
ATTACHMENT
ACS-7.pdf
ATTACHMENT
PLC33_01.pdf
ATTACHMENT
correctionslip8.pdf
ATTACHMENT
Correctionslip9.pdf
ATTACHMENT
correctionslip10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].