15th Finance Commission (Tied) Samalapuram

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B

Supplying and filling in foundation and basement with filling M sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.

Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed and consolidated etc., complete

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part M sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC slabs, Rectanular beams, Lintels and Stair case waist slabs conopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed by departmental Engineers.

A)Footing

B) Columns

C) Slab

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part M sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1: 5 mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification – 10m2

Supply, fabricating & fixing in position of M.S door of size 0.0.9 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC.Unsheathed CU.conductor of 1100V grade in Suitable Heavy gauge MS Conduit Pipe Concealed in Wall and Ceiling with MS accessories with MS Switch box in flush with wall 5A F.T. Switch with 3mm thick hylem sheet cover MS Switch box with Continuous earth wire Connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Light Point/Fan point (For Electronic Regulator) (SD-26)

Supply and fixing of bulk head fitting with guard suitable for incandescent lamp with 60 W Bulb including all cost and conveyance etc., complete (SD-84)

Supply and fixing of 4'40 w twin street light flu.fitting complete with copper choke and condensor with 19mm dia GI pipe (Class 'B' with 1 no.19mm GI bend complete on the existing post / wall with 16A arieal fuse unit on MS plate with PVC unsheathed Cu.leads,with MS clarnps and aluminium painting with Flu.Tubes etc., complete(SD-94)

Supply and Run of 2 of 1.5Sq.mm (22/0.3) P.V.C insulated Sc Unseated co conduct of 1100v 7/20 GI Barer wire for Service Connection (SD-64)

SENTHIL CONSTRUCTIONS (BID ID -1001756)