Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-Finance | L1 | Accepted-Finance Lowest | |
| 2 | L2₹13.2 L+₹48,740 (3.84%)Rejected-Finance JODHPUR ROAD UTARLAI BARMER RAJ 344035 | BARMER | RAJASTHAN | 344035 | L2 | Rejected-Finance Highest |
Tender Value
₹13.6 L
EMD Value
₹27,100
Closing Date
14 Feb 2022, 9:00 amClosed
GE ARMY BARMER
Military Engineer Services Garrison Engineer Army Jalipa Mil Stn Post box No 53 Barmer 344001
REPAIRS RECANNING POLISHING OF WOODEN AND STEEL FURNITURE AT JALIPA MIL STN UNDER GE ARMY BARMER
2022_MES_501949_1
GE(A)/BMR-39 OF 2021-22
Open Tender
Miscellaneous Works
Item Rate
180 days
GE ARMY BARMER
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY BARMER
₹27,100
17 Feb 2022
17 Jan 2022
15 Feb 2022
17 Jan 2022
14 Feb 2022
31 Jan 2022
Amount
WOODEN FURNITURE BED PLYWOOD TOP (Drg. No. FD-246): M&L for replacement of following unserviceable / defective parts with new one, including two coat of french polishing on new wooden surface and one coat on old wooden surface (including preparation of surface) complete all as shown on drawing and as specified: - (a) Head board complete.
(b) Foot board complete.
(c) Leg made to shape with first class hard wood (teak)
(d) Head / Foot board batten made of first class hard wood (teak).
(e) Long rail made of 2nd class hard wood.
(f) Short rail made of 2nd class hard wood.
(g) Ply wood top with 12mm thick ply wood, grade BWR, both side commercial. Polishing on ply top is not required.
(h) Tightening existing joints using new bamboo pins duly appling fevicol of existing size as shown in drawings.(Two pins in each joints)
SOFA SET FIVE SEATER WITH ARMS (Drg. No. FD-373/FD/MAP-II/02): M&L for replacement of unserviceable / defective parts with new one of 1st class hard wood (teak) complete all as shown on drawing and as specified: - (a) Wooden arm section 70mm x 35mm.
(b) Wooden front legs section 70mm x 35mm.
(c) Wooden rear legs section 70mm x 35mm.
(d) Sofa cushion with cover as directed and specified.
TABLE DINNING 8/6 PERSONS (Drg. No. FD-273): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified:- (a) Leg made to shape with 1st class hard wood (teak).
(b) Long rail made of 1st class hard wood (teak).
(c) Short rail made of 1st class hard wood (teak).
(d) Table top (Table dinning 8 persons) made out of 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(e) Table top (Table dinning 6 persons) made out of 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
CHAIR EASY CUSHIONED (Drg. No. FD-358): M&L for replacement of unserviceable / defective parts with new one of 1st class hard wood (teak) complete all as shown on drawing and as specified: - (a) Wooden arm section 65mm x 25mm.
(b) Wooden front legs section 70mm x 25mm.
(c) Wooden rear legs section 70mm x 25mm.
(d) Seat & back cushion (synthetic foam of 28 density)of each chair with letherised rexine cover as directed and specified.
TABLE OF SIZE 900X600X 760 WITHOUT DRAWER (Drg. No. FD-284): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified:- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made to shape with 1st class hard wood (teak).
(c) Front / rear rails made of 1st class hard wood (teak).
TABLE OF SIZE 900X900X 760 Wooden (Drg. No. FD-291): M&L for replacement of following: -unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made of 1st class hard wood (teak).
(c) Front/rear/side rails made of 1st class hard wood (teak).
PEG TABLE (Drg. No. FD-277): M&L for replacement of following: -unserviceable/defective parts with new one complete all as shown on drawing and as specified:- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made of 1st class hard wood (teak).
(c) Top rail made of 1st class hard wood (teak).
(e) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)
TEAPOY (Drg. No. FD-278): M&L for replacement of following unserviceable /defective parts with new one complete all as shown on drawing and as specified:- (a) Teapoy top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made of 1st class hard wood (teak).
(c) Top rail made of 1st class hard wood (teak).
TABLE WRITING (Drg. No. FD-275): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) Top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made of 1st class hard wood (teak).
(c) Front/rear rail made of 1st class hard wood (teak).
(d) Side rail made of 1st class hard wood (teak).
(e) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.
(f) Cup board made of 19mm thick particle board with one side teak finish, 12mm thick particle board commercial finish both side for shelves and 6mm thick ply wood for back.
(g) Knob 40mm size with screws.
TABLE CENTER (Drg. No. FD-274): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified:- (a) Top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made of 1st class hard wood (teak).
(c) Side/Top rail made of 1st class hard wood (teak).
CHAIR DINNING (Drg. No. FD-279): M&L for replacement of following unserviceable / defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be made good as per existing: - (a) Front leg made of 1st class hard wood (teak).
(b) Rear leg made of 1st class hard wood (teak).
(c) Back rest made of 1st class hard wood (teak).
(d) Stiffener made of 1st class hard wood (teak).
(e) Front/rear/side rail including making holes for canning, made of 1st class hard wood (teak).
(f) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)
M&L re-canning to chair with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.
CHAIR WRITING (Drg. No. FD-280): M&L for replacement of following unserviceable/defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be made good as per existing: - (a) Front leg made of 1st class hard wood (teak).
(b) Rear leg made of 1st class hard wood (teak).
(c) Hand rest made of 1st class hard wood (teak).
(d) Front/rear/side rail including making holes for canning made of 1st class hard wood (teak).
(e) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)
(g) M&L re-canning to chair with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.
CHAIR EASY (Drg. No. FD-229): M&L for replacement of following unserviceable/defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be made good as per existing: - (a) Front/rear leg made of 1st class hard wood (teak).
(b) Hand rest made of 1st class hard wood (teak).
(c) Front/rear/side rail of seat including making holes for canning, made of 1st class hard wood (teak).
(d) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)
(e) M&L re-canning to furniture with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.
HAT STAND WITH MIRROR LARGE/ SMALL (Drg. No. FD-361): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Replacement to unserviceable 5.5mm thick mirror size 300mmx660mm.
(b) Replacement to unserviceable CP hanging hooks 120 mm long.
TABLE DRESSING GENTS WITH MIRROR (Drg. No. FD-230): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and specified: - (a) Teak wood mirror frame.
(b) Looking mirror 6mm thick copper electro plated of size 380 x 760mm.
(c) 12mm thick teak wood for sides and face of drawer including 6mm thick ply wood in bottom and chromium plated knob complete.
TABLE DRESSING LADIES WITH MIRROR (Drg. No. FD-251): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Teak wood mirror frame.
(b) Looking mirror 6mm thick copper electro plated of size 365 x 1226mm.
(c) 12mm thick teak wood for sides and face of drawer including 6mm thick ply wood in bottom and chromium plated knob complete.
M&L French polishing to following wooden furniture with one or more coats as required to give glazy appearance complete all as specified and as directed: - (a) Bed plywood.
(b) Chair dining long back.
(c) Table dining 6/8 persons.
(d) Table 900x600x760 mm with drawer.
(e) Table 900x600x760 mm` without drawer.
(f) Peg table.
(g) Teapoy.
(h) Table writing.
(j) Table center.
(k) Chair dining.
(l) Chair writing.
(m) Chair easy.
(n) Sofa set five seater.
(o) Table dressing ladies with mirror.
(p) Table dressing gents with mirror
(q) Locker bed side wooden
(r) Table bed side wooden.
(s) Sofa Single seater.
(t) hat stand with mirror large/ small
(u) Side board
(v) Table centre two tier.
STEEL FURNITURE ALMIRAH MEDIUM STEEL WITH SHELVES (FD-1032): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) MS lock with key.
(b) MS Chromium plated handle
(c) MS cleat for shelf
TABLE OFFICE OFFICERS STEEL (FD-1003): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified:- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Lock with Key for drawer.
ALMIRAH LARGE STEEL WITH SHELVES (FD-1031): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) MS lock with key.
(b) MS Chromium plated handle
(c) MS cleat for shelves.
TABLE OFFICE CLERK STEEL (FD-1004/84M): M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as specified: - (a) MS lock with key for drawer.
(b) Table top made out of 19 mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(c) Steel drawer made to shape with 20 gauge MS sheet.
TEAPOY VERANDAH (FD-383): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Teapoy top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging 4mm thick.
(b) Welding to teapoy frame
CHAIR CB STEEL WITH ARMS (FD-75M): M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as specified: - (a) Bottom seat frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)
(b) Back frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)
(c) Arm rest wooden duly painted (Godrej pattern)
CHAIR REVOLVING (TP):- Repair revolving chair of any type for carrying out necessary repair work as under:- (a) Repairig /greasing of hydrolic mechanism of chair revolving any type
(b) replacement of UNSV Wheels of chair revolving any type by supply & fixing of new wheels
(c) Replacment of UNSV base of chair revolving any type with arms low back and replacement of UNSV seat and S/F with new ready made seat coplete all made to shape size along with cushion
(d) Replacement of old UNSV tapestry cloth by S/F new tapestry cloth of approved quality of chair revolving any type
CHAIR CB STEEL WITHOUT ARMS (FD-75M): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) Bottom seat frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)
(b) Back frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)
CHARPOY GI PIPE WITH NYLON NEWAR (FD-220): M&L for replacement of following unserviceable /defective parts with new one complete all as shown on drawing and as specified: - (a) Long rail of GI pipe medium grade duly threaded.
(b) To convert long rail into short rail obtained from item No 114 (a) above and fixed
(c) To convert long / short rail into legs obtained from item No 114 & 115 above and fixed.
(d) MCI elbow 32mm (ISI marked).
(e) Check nut 32mm.
(f) Weaving the charpoy closely with new 50/55 mm wide nylon newar light colour, 1st quality (not recycled), weight of nylon newar for each charpoy not less than 1.5 Kg.
TABLE DINNING OR’s (FD-165N): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) 25mm square MS pipe as in frame/stiffeners /legs heavy duty, fixed through welding.
(b) Top made of 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
CHAIR VERANDAH (FD-259): M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing & as directed: - (a) 20mm dia MS pipe heavy duty as in legs/frame /stiffener, fixed through welding.
(b) Re-canning with new best quality cane 4mm wide white / cream coloured closely woven with Godrej Pattern and as shown in drawing both seat and back.
TABLE OF SIZE 900 X 900 X 760mm STEEL (FD-1009): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Table top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging 4mm thick.
(b) Leg made out of mild steel 20mm square tube, cut to size and fixed through welding.
TABLE OF SIZE 900 X 600 X 760mm STEEL (FD-1007): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Table top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.
(b) Leg made out of mild steel 20mm square tube, cut to size and fixed through welding.
CHARPOY GI FOLDING WITH NYLON NEWER (FD-388):- (a) Weaving the charpoy closely with new 50/55 mm wide nylon newar light colour, 1st quality (not recycled), weight of nylon newar for each charpoy not less than 1.5 Kg.
CHARPOY MS TUBE WITH 12MM PLYTOP (FD/MAP-II/01) :- M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) Ply wood top with 12mm thick ply wood, grade BWR, both side commercial. Polishing on ply top is not required.
(b) Replacement of UNSV Nuts and bolts with new one complete for fixing of 12 mm ply wood over the MS tube
M&L for painting to following steel furniture with one coat of synthetic enamel paint including preparation of surfaces, of tint olive green (OG) or as mentioned against item complete all as specified and as directed: - (a) Almirah large steel with shelves.
(b) Table office officer steel
(c) Almirah small/med steel with shelves
(d) Table office clerk steel.
(e) Chair CBA steel with arms.
(f) Chair CBA steel without arms.
(g) Teapoy verandah (Painting with white paint).
(h) Chair verandah steel (Painting with white paint).
(j) Table steel 900 x 900 x 760mm.
(k) Table steel 900 x 600 x 760mm.
(l) Locker bed side steel.
(m) Book case steel
(n) Trestle store room steel
(o) Charpoy MS Tube frame (painting with black paint)
(p) Bed hard with steel frame (painting with black paint)
(q) Table for duplicator steel
(r) Table pantry
(s) Steel rack of various size
(t) Rack side three/four space steel
Removing old unserviceable nylon newar from GI Charpoy & supply and fix of 12mm thick plywood commercial type (ISI marked) of size 1980mmx900mm with and including 10 Nos hooks/cleat (3 Nos welded on each long rails and 2 Nos welded on each short rail) made wih MS flat iron 40x6mm and 40mm long duly holed suitable for 6mm dia bolts, 10 nos bolts & nuts 6mm dia 25mm long with 3mm thick washers, two numbers 40x6mm size MS flat iron stiffner between long rails fixed at 660mm equal distance from short rails fixed with and including 5 to 6mm dia 60mm dia long bolts, nut 3mm thick washer including necessary drilling,welded portion to be grinded smoothly and applying two coats of aluminium paint over a coat of aluminium paint on steel surfaces complete all as speciied and as directed (FD-220). Make: Kitply, National ply, Central India.
M/s godara infratech and power industries
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .