REPAIRS TO FOOTPATH, DRAINS, HARD STANDING AND BOUNDARY WALL /FENCING OF AREA IV OF AGE B/R WEST AT COLABA, MUMBAI

Amount

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed.

M & L for rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment, laid over & including coarse sand cushning 25mm thick, compaction of paver blocks using surface vibrator, filling the joints with fine sand etc. complete all as specified and directed.

M & L for glazed / matt finish chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) laid over and including 20 mm thick in CM (1:6) complete all as specified and directed.

M & L for coloured vitrified heavy duty outdoor anti skid tiles 10 mm thick (Square/rectangular, 600mm x 600mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over and including 20 mm thick plaster in CM (1:4) complete all as specified and directed.

M & L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular, 600mm x 600 mm) polished area of each tile, exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for 18 - 20mm thick Granite stone (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado, laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing, laid over and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supplied and fixing Rolled Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde -E-165 complete all as specified and directed.

Supplied and fixing Rolled Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to FE 290 Gde -E-165 complete all as specified and directed.

S & F Rolled Mild steel 2mm thick , plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over two coats of epoxy primer complete all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent in Nerolac / Shalimar as approved by GE

Supply only chain link MS galavanised fencing of approved size dia, complete all as specified and directed.

Fixing only chain link fencing including line wires, and mesh size type of stadards, rail straining bolts etc size of mess 100x100mm and 4mm dia wire, including dismantling of old fencing, complete all as specified and directed.

S & F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both end n.exc 5 cm long, 12mm dia,. complete all as specified and direceted.

S & F in repairs Galvanised, 2 strand, steel, barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured for payment).

S & F in repair Galvanised steel concertina fencing coil fixing to any type of standard mild steel with welding including, securing or tying at crossings all specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.

M & L for coloured glazed digital ceramic wall tiles 300x450x7 mm / 300 x 600 x 7mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry, pointed in white cement mixed with pigment to match the shade of tiles, laid over and including rendering 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified and directed.

S & F Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removing debris to out side MoD land complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for and removing debris to out side MoD land complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for including removing debris to outside MoD land complete all as specified and directed.

Material and labour for 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and all other similar works finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for forming construction joint 30mm deep X 10mm wide with sealing compound grade A complete all as specified and directed.

Material and labour for READY MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-20 type 1, 1:1½:3 (20 mm graded stone aggregate) as in flooring and all other similar works complete all as specified and directed.

M & L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and well ramming to a true surface complete all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

Material and labour for 75 mm thick plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in flooring and all other similar works complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 in road side kerb stones of size 450 x 300 x 150 mm or similiar with longer facing edges tapered on top and all other similar works including use of form work complete all as specified and directed.

Material and labour for preperation of old / new Pre-cast concrete kerb stone surfaces or similiar concrete surfaces and applying two coats of industrial epoxy paint over a coat of primer of any colours and pattern complete all as specified and directed .

Material and labor for two coats of epoxy concrete floor coating on surface (consists of hardner and resin ) over one coat of primer for creating a bonding between epoxy and concrete surface including preparation of the surface from any undulation (using wire brush or electric floor scrubber, Etching) removing all oil and grease stain if any, and brooming the surface clean to remove any settle dust particle, filling the cracks with suitable epoxy grout material and then applying the coating with the help of a roller all as per manufacturers instructions complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings, built in cement mortar complete all as directed .

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified & directed.

M & L for brick work with fly ash building bricks having standard approved size, built in CM (1:6) complete all as specified & as directed.

All as per item No. 32 mentioned here in above, but except bricks. Note: Serviceable bricks obtained from Item No. 31above to be re-used.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water and removing debris to out side MoD land, complete all as specified and directed.

M & L in repairs for Ready mixed plaster for internal / external rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces finishing the surface even & smooth including use of scaffolding for any height of bldgs and removing debris to outside MoD land complete all as specified and directed. Make: Ultratech readiplast / ACC Accoplast / Ultratech Super stucco /Wall plast / Sound buildcare pvt. Ltd/ or other approved equivalent make.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete and like etc. complete all as specified and direcetd.

M & L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping , bed concrete and all other similar works including use of necessary formwork complete all as specified and as directed.

M & L for RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded stone aggregate) as in precast cover slab fixed in position, tie between two brick walls and all other similar works set in CM 1:4 including use of necessary form work complete all as directed.

M & L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to IS complete all as specified and directed.

Cleaning of open drains (for width of drains n. exc. 30cm), removing silt, soil, mud sludge, vegetation growth etc. complete and removing the same to out side MoD land, complete all as specified and directed.

Cleaning of open drains (for width of drains exc. 30 cm but n.exc. 60 cm), removing silt, soil, mud sludge, vegetation growth etc. complete and removing the same to out side MoD land, complete all as specified and directed.

CCleaning of open drains (for width of drains exc. 60 cm but n.exc. 75 cm), removing silt, soil, mud sludge, vegetation growth etc. complete and removing the same to out side MoD land, complete all as specified and directed.

Cleaning of drains/culverts (for width of drains n. exc. 30 cm) including removing & re-covering of RCC/CI/Steel covers by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all complete all as specified and directed.

Cleaning of drains/culverts (for width of drains exc. 30 cm but n.exc. 60 cm) including removing & re-covering of RCC/CI/Steel covers by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all complete all as specified and directed.

Cleaning of drains/culverts (for width of drains exc. 60 cm but n.exc. 75 cm) including removing & re-covering of RCC/CI/Steel covers by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC, PVC or Reinforced cement concrete) set in cement mortar complete all as specified and directed.

S & F 150 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

S & F 150 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes, laid in trenches complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M & L for RCC 1:2:4 Type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls and all other similar works, complete all as specified and directed.

Supply and fixing in repairs 200 mm dia bore reinforced cement concrete pipes, class NP3, laid and jointed with collar, complete all as specified and directed.

Material and labour for providing plain cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate as in surface channels and drains, finished even and smooth complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends etc. complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls/ceilings by and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent) including use of scaffolding where ever required at any height for external painting, complete all as specifed and directed.

M & L for preparing old surfaces of walls/ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) including use of necessary scafolding of any height for external painting, complete all as specifed and directed.

SAI SIDDHI CONSTRUCTION

SAHU AND SAHU CO.

Shetty Construction Co

Garima Construction Co

RAJU ENTERPRISES

D.S. Construction

SHREE JAGDISH FURNITURE CO.

Bidder Name

Nilesh Construction

Shetty Construction Co

SAHU AND SAHU CO.

Garima Construction Co

RAJU ENTERPRISES

D.S. Construction

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION