Pot holes and repair work on various roads ODR MDR SH of block Mauranipur

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Excluding cost of GST).

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.complete in all respects. (Excluding cost of GST).

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 (Excluding cost of GST).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (Excluding cost of GST).

Cleaning of the existing surface and laying premix carpet 2cm thick over a tack coat @ 35kg/100 sqm with graded approved 13.2mm grit @ 1.80cum/100sqm and 11.2mm grit @ 0.90 cum/100sqm and bitumen @ 146kg/100sqm including heating the Bitumen upto the required temperature and mixing either in mixer or in hand drum including cartage of material and also including cost of all materials, fuel wood, roller charges labour, T&P etc. as per direction of Engineer in charge (Excluding cost of GST).

Cleaning premix surface and laying seal coat type “C” with approved 6.70mm graded grit @ 0.90cum/ 100sqm and bitumen @ 0.65kg / sqm including heating of the bitumen upto the required temperature and mixing either mixer or in hand drum including cartage of material, also including all material, fuelwood, roller charges, labour, T&P etc. as per direction of Engineer in charge (Excluding cost of GST).