Supply and construction of Field Security Fence (Chain link)

Amount

CHAIN LINK FENCING (3000 MTR)

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

M & L for PCC 1:3:6 type C2 ( using 40mm graded stone aggreate) in Foundation, Filling and mass concrete complete all as specified and directed.

S&F post and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets including all neassary drilling boilting or reveiting etc , conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply only Chain link MS galvanisd fencing 50x50mm mesh size and 4mm dia (weight not less than 4.73 Kg/Sqm) and shall conform to IS:2712-2003,Specification for galvanized steel wire chain link fence fabric. The mesh wire and line wire of the fabric shall be manufactured from galvanized steel wire conforming to IS 280:2006 having zinc coating of type heavy as laid down in IS 4826, Hot dipped galvanized coatings on round steel wires or IS 12753, Electro galvanised coatings on round steel wires complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed.

S & F Mild steel screw nut & bolts of 5 to 10 mm dia and n exc 5 cm long with washer (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

S & F Mild steel screw nut & bolts of 11 to 15 mm dia and n exc 5 cm long with washer (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

S&F MS 10 mm dia round bars ,Fe-410 W(Gde. E -250) quality- A cut to length, bent to shape required and welding to chain link fencing post complete all as specified and directed.

Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat or red oxide primer all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed in any type of soil.

Gate (04 Nos) of size 5.50 x 2.0 Mtr

Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified and as directed.

M&L for PCC 1:4:8 type D2 ( using 40mm graded stone aggreate) in Foundation, Filling and mass concrete complete all as specified and directed.

M & L formwork to sides of rough finished flat surface of concrete foundations, footings, raft, bases of colums, plinth beams and simillar work vertical or to batter all as specified and as directed.

M & L for RCC M-20,Type B1,1:2:4(20 mm graded aggregate) (Nominal Mix) in Foundation, including rafts, footing, foundation beams, bases for column,etc complete all as specified and directed.

M & L Formwork to rough finished flat surface of Walls, pillars, posts, struts, piers, columns and stanchions all as specified and directed.

M & L for RCC M-20 ,Type B1,1:2:4(20 mm graded aggregate) (Nominal Mix) in columns all as specified and directed.

M & L for mild steel TMT Bar 12 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M & L for mild steel TMT Bar 16 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M & L for Mild steel TMT Bar 5 to 10 mmn dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips in stirrups all as specified and as directed

M & L Rendering 10 mm thick in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.

M& L for preparation of new plastered surfaces of wall and applying two coats of cement based paint of apporeved colour and pattern complete all as specified and directed.

S&F Framed work as in gates of angle or other section complete , conforming to Fe-410 W Gde-E-250 complete all as specified and directed.

Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat or red oxide primer all as specified and directed.

Returning filling in of loose/soft soil, including spreading, levelling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

ARMY TRADERS (BID ID -3120512)

Pioneer Traders (BID ID -3116634)