Sanganer talab ka vikas evm soundaryakaran karya (punh nivida)

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

BANWARI LAL SOMANI (GSTN-NA) BID ID -3001494

Description of Work / Item(s)

Amount

P/F bashi parhapur red stone ornamental cledding 20 mm thick in cement mortor pointing in white cement mixed with pigment to match the stone colour

Providing & fixing Bansipaharpur stone "ornamental" stone cledding thickness 30mm.

Providing & fixing Bansipaharpur stone "Dassa" with "Panpatti" design size thickness 75 to 100mm.

Construction of Hut/Gajebo/ as per following and enclosed photograph circular platform at ground level goving overall dia not less then 4.60 mtr with 1.5 mtr. Width in annular shape footpath- plinthlevel area 17 sqm (Dai of circulat paltform not less than4.66 mtr) plinth geight 0.60 mtr From Ground level shouldbe in three Equal steps having rise 15 cm with on side gentle slope ramp having width 1.0 mtr and with and with side reling- Ist roof level height shoulb be notless then 3 mtr from plinth level total covered area of Ist roof level not less than 21.50 sqm- Roof should be made in frustum of cone shape having frustum height 0.60 mtr and thickness of roof slab should not be less than0.125 mtr 2nd roof shoulbe be made not less than 2.0 mtr dia at vottom with 0.60 mtr cone geight at center difference of level between both roof should be not less than 1 mtr with 6 noc RCC (m-20) circular columan gaving dia 0.23 mtr with required reinforcement from plnth level of support Ist roof levle having load bearing capacity of both roofs with required foundation the hut shoulb be faciliated with 12 No. Round sitting bench of 0.45 mtr width and 0.10 mte thick should be made in RCCof M-20 RCC work should be complet in M-20 with required reinforcement (Not less then minimum) as per relevant look of wooden finishing with ornamental plaster in rich mortar using while cement oxide color and banboo/Ball Design with Fianl finished intouchwood color (two or more coats) as per photograph enclosed with giving asthetic look . The job work should be bomplete as per directionof engineer incharege ans upto satisfaction of engineer incharge.

Providing and laying Accupressure tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 30x30 cm

P/F of interlocking reflective tiles of thickness not les than 60 mm as per site incharge in twocoloursof grade M-30 work i/c. Proper fixing of edges of tiles having recommended gaps between them i/c. sand of20 mm base. The tilesin oreder to as per Site Incharge.

Stone Chhatri :- Providing & fixing Bansipaharpur stone "Chhatri" with gumbud & calush size 10'x10'x10' height complete as Per Direction Of Engineer Incharge.