8978 AUGMENTATION OF SANITARY FACILITY AT BARRACK AND DESTROYER WHARF AT NAVAL DOCKYARD SPECIAL REPAIR REPLACEMENT TO COOLING APPLIANCES AGAINST BER AT NAD MBI SPECIAL REPAIR TO CEILING FANS AGAINST RECENTLY BER AT FMU MBI SS COMPLEX ABD ADJACENT BUI

Amount

Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out hard/ dense soil complete all as specified and as directed.

Excavation in trenches n.exc 1.50M wide and n.exc 1.5M in depths for foundations etc and getting out in hard/dense soil all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and as directed.

Materials and labour for bricks work with sub class 'B' bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No.5 but half brick work in cement mortor (1:4) complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed..

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for form work to edges of concrete flat and similar work exc 10 cm but n.exc 20cm wide for fair finished surfaces complete all as specified and as directed..

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and as directed.

M & L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No. 18 above but for 6 to 8 mm dia complete all as specified and as directed.

All as per item No. 18 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

S&F 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends .

S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed complete all as specified and directed.

S & F single piece WC with UF Soft close slim seat cover fixing accessories, accessories set and cistern fitting incl trap/connecting piece complete all as specified and directed.

S&F for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S & F for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

S&F for health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed . (Make - Jaquar CAT PART No-ALD-CHR-585 or equivalent make from list of manufactures)

S&F CP toilet roll holder with flap (Make - Jaquar/ Hindware/ Cera) complete all as specified and as directed

S&F brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed complete all as specified and as directed

S&F CP bib cock 15 mm bore complete all as specified and as directed .

S&F counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed .

S&F two way CP bib cock 15 mm bore with wall flange complete all as specified and as directed .

S&F CP Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed .

S&F of vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed .

S&F 32mm dia PVC waste pipe 90cm long for WHB and urinals fixed complete all as specified and directed.

S&F 20mm bore for gun metal glove or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed .

M&L for 18-20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed .

S&F Push button taps for urinals, cast copper alloy, screwed down, screwed for 15mm dia iron pipe and fixed complete all as specified and as directed .

S&F hand dryer complete all as specified and as directed .

S&F soap dispenser complete all as specified and as directed .

S&F contactless fittings wherever applicable all as specified and directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and as directed .

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed .

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel (Make -Armstrong/ Chanakya/ Everest.

M&L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed .

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and as directed .

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed .

M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed complete all as specified and as directed ..

M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M & L for Non skid joint free coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed .

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as directed .

S &F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S & F for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and as directed .

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed .

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed .

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and as directed .

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed .

S&F butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and as directed ..

S&F 150mm sizes brass handle cast type polished bright complete all as specified and as directed .

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified and as directed .

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete as directed.

S&F 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F 100mm dia CI soil, waste and vent pipes in any length with or without ears, fixed in walls complete all as specified and as directed ..

S&F 100mm CI bends (any radius) fitted with oval access door complete all as specified and as directed .

S&F 100mm CI branch piece, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door complete all as specified and as directed ..

S&F 100mm CI cowls complete all as specified and as directed .

S&F cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), 100mm dia complete all as specified and as directed .

Cleaning & desilting of manholes depth excd 1.00 m but not excd 3.00 m by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc & removing the same(silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified & directed.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each complete all as specified and as directed .

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S & F for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed .

S & F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

All as per item No.82 above but for 20 mm bore of pipe complete all as specified and as directed .

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane etc complete all as per particular specification , manufacturers instructions complete all as specified and as directed . Note : Rate inclusive of taking down and re fixing of existing lightning arrestor system including povision of new PCC block for damaged PCC block complete as directed by Engineer-in-charge

M&L for brushing neat cement slurry with 3Kg of cement per square metre complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC shall be measured and paid seperately

Supply only integral water proofing compound complete all as specified and directed.

M&L for machine pressed cheqered cement coloured tiles of size 250mmx250mmx20mm/ 300mm x 300mm x 20 mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:3 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

Material & Labour pre of newly surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

S&F rotational moulded polythene water storage tank of 2000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed. Make- Prayag/Polytuff.

Removal of debris old concrete spoils etc excd 5 KM but not excd 15 KM complete all as specified and as directed outside MD Land complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for One light point controlled by one switch

All as per item No. 98 above but for One Fan/bell point controlled by one 5A switch complete all as specified and directed.

All as per item No. 98 above but for One 5 Amps switch socket combination on independent board complete all as specified and directed.

All as per item No. 98 above but for One 5A flush type switch socket point on same board board complete all as specified and directed.

S & F modular flush box of 3 module complete all as specified and directed.

S & F modular flush box of 6 module complete all as specified and directed.

S & F modular flush box of 1/2 module complete all as specified and directed.

S &F modular cover plate with frame 2 moule complete all as specified and directed.

S &F modular cover plate with frame 3 moule complete all as specified and directed.

S &F modular cover plate with frame 6 moule complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for One 5pin, 15 Amps switch socket combination on same board

M&L for submain wiring with 2 runs of 1.5 sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and directed. Note: 2 runs of 1.5 Sqmm cable and one run of cable conductor shall be measured as one unit.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fix switch piano, flush type 1 way 5 Amps 240 volts complete all as specified and directed.

Supply and fix switch piano, flush type 1 way 16 Amps 240 volts complete all as specified and directed.

Supply and fix socket 5 Amps 2 in 1,3 pin 240 volts Ac flush type all as specified and directed

Supply and fix socket 15 Amps 2/3 pin 240 volts Ac flush type all as specified and directed .

Supply and fix ceiling rose surface bakelite 60x50mm 240v AC complete all as specified and directed.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent in Havells/HPL (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quoted rate)

S&F MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S&F MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan complete all as specified and directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl complete all as specified and directed. Note - Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S &F Rotational moulded polyethylene water storage tanks of 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repairs of 50 mm bore ISI marked, GI tubing medium grade, galvanised with all fittings and laid in trenches etc complete all as specified and as directed

S & F in repairs, 50mm bore Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 MPa with iron wheel head, screwed both ends for iron pipe, ISI Marked including taking out the old unserviceable gate valve complete all specified and as directed.

S&F Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply, install, Test and commissioning windowtype AC 1.5 TR capacity units complete with cordless remote control unit, 220-240 volt, 50Hz, single phase fitted with high quality rotary compressor and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating complete as directed. Note : (a) Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted.Make : Daikin/Hitachi/LG/Blue star/Voltas (b) Above quoted rate shall be deemed to be inclusive of taking down of old one.

Supply and fix Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed incl taking down old existing unsv enclosure complete all as specified and directed.

M&L for submain wiring with 2 runs of 4 sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and directed.

Supply and fix switch, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module complete all as specified and directed.

S & F water cooler with Filter electrci driven having approx capacity of 80L and nominal caapcity of 40L per hour all as specified and directed .Make Voltas/Blue star

Supply & Fixing Tubes medium grade galvanised 15mm bore pipe including all pipe fittings such as ends, elbows,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good making good the surface to match with surrounding complete all as specified and directed..

Cutting the existing steel tubing and connecting the additions line including tee, bend, union,etc all as specified and directed.

Supply & Fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F for Rigid non-metallic PVC conduit 20mm dia incl connecting to water cooler drain pipe complete fixing accessories such as complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs complete all as specified and directed.

Supply, fixing and clamping , jointing copper tubing for suction line and for liquid discharge line insulated with suitable insulation material including making hole in wall for passing through and making good disturbed surface complete all as specified and directed.

Dismantling and taking down the existing fan any size at site,including sealing cable ends complete all as specified and directed.

S&F ceiling fan 1200mm sweep BLDC ,BEE 5 star rated 230V 50Hz AC having air delivery 220cum/min 350rpm supply single phase including accessories and connection with flexible wire three core for phase,neutral & earth including taking down old UNSV fan and transport to MES store. Make: Havells cat part No. Efficiencia neo or equivalent make from list of manufactures.

S&F Fire pump diesel engine driven horizontal end suction, centrifugal type confirming to IS- 12469 1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with 'range of operation' 0 % to 150 % of rated capacity for 440 V , 3 phase, 50 Hz AC supply 70 m Head. 1620 LPM discharge with start/ stop button and other accessories like Batteries and charger with full control Notes :- (a) Old DD Pump to be deposited in MES STORE YARD GE(NW) Kunjali at Navy Nagar (b) The quoted rate shall include starter and foundation, frame and suction valve , MS Pipe and nut and bolts etc which are required for the fixing of the fire pump.

georson constructions