Spl rep to Bldg No P 101 05xOR living accn at upper Garrison of Khreuh under 861 EWS

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exe 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.

M&L 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in bays etc finished even & smooth without using extra cement including joint filling using sealing compound grade A complete all as specified and directed.

M&L 25 mm PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor to receive floor finishes etc. complete all as specified and directed.

M&L 50mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in subbase for receiving floor finishes etc. complete all as specified and directed.

S&F coloured Glazed ceramic tiles not less than 8mm thick area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed/bedding layer 15mm thick in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic dark shade glossy coloured tiles of size 300mm x200mmx7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L kota stone slab flooring not less than 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed in cm (1:4) complete all as specified and directed.

All as per item No 10 above but on vertical surfaces of walls /skirting/dado over backcoat of 15mm thick in CM 1:4 etc. complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 400mmx400mm not less than 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes. complete all as specified and directed.

S&F in repairs stainles steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples. complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flushing system, flush pipe & wate pipe) all as specified & directed.

S&F in repairs stainless steel gratings , 125mm dia. complete all as specified and directed.

S&F in repairs PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore fancy type CP pillar tap, waste coupling and 32mm dia PVC waste pipe). complete all as specified and directed.

S&F in repairs 15 mm size PVC connection with PTMT nuts 600 mm long. complete all as specified and directed.

S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms ). complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F in repairs 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1. complete all as specified and directed.

S&F in repairs 15 mm bore fancy type CP bib taps cost copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore CP stop/angle valve cast copper alloy screwed down , high pressure with crutch or butterfly handle fancy type screwed both ends for iron pipe or for unions. complete all as specified and directed.

Taking up or down 15mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

S&F 15 mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc including short length complete all as specified and directed.

S&F 20mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc including short lengths complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor. complete all as specified and directed.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 110mm PVC WC connector bent type complete all as specified and directed.

S&F in repairs cast iron Nahani trap 75 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F in repairs aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges. complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L applying 3 mm thick wall care putty on newly plastered surface of wall and applying two coats of oil bound distemper including preparation complete all as specified and directed.

M&L preparing plastered or un plastered new surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L two coats of synthetic enamel paint on old wooden surfaces including preparation of surfaces over 10cm width or girth.complete all as specified and directed.

M&L preparation of old decorated CGI Sheet surfaces of any descrption not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (in comouflag/plain pattern) complete all as specified and directed.

M&L for preparation of old steel surface over 10 cm width or girth and applying two coats of synthatic enamal paint. complete all as specified and directed.

M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over one coat of pink primer including preparation of surfaces, over 10cm width or girth, complete all as specified and directed.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed. complete all as specified and directed.

M&L for preparation of plastered or unplastered old surface of walls and applying two coats of cement base paint on walls (externally) including removal of existing treatment. complete all as specified and directed.

M &L for preparing new plastered surface of walls and applying two coats of Cement base paint on walls over a coat of alkali-resistant primer complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm all as specified with hangers 4mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long. complete all as specified and directed.

S&F 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminium GI/MS as per specification and drawing. complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in sub base for receiving floor finishes etc. complete all as specified and directed.

M&L chequerred cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thic screeed bed in cm 1:6. complete all as specified and directed.

M&L in reapir 20mm thick pre-polished granite slabs, machine cut, in vertical/horizontal surfaces with bolting and araldite laid over cement plaster and jointed with grey cement slurry, and pointed with white cement mixed with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed.

Dismantling water storage tanks of any description,exc 250 & n.exc 500 litres capacity and removing from site complete all as specified and directed.

S&F Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings, complete all as specified and directed.

S&F factory made soild PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap isert for top rail and bottom rail paneling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 2nd class hard wood 40 mm thick panelled shutter Plain framed, panelled shutter (one panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed to chowkhats complete all as specified and directed.

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150mm long, complete all as specified and directed.

S&F butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

S&F 300mm, ordinary rat tail pattern springs, including rotter and roller plate mild steel complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete all as specified and directed.

S&F aluminium handle extruded fabricated type anodised of size 150 mm complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering10 mm thick in cement mortar in CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L water proofing treatment to sunken slab using Acrylate - Silicon - based technology by OEM to include. (a) Removal of all material. (b) Surface preparation. (c) Water proofing of cracks and joints. (d) Screed repairs. (e) Treatment of roof with stagnant water. (f) Water proofing application. (g) Testing to include ponding test. NOTE : The work shall be got executed all as specified in particular specification and as directed by GE through OEM only.

Taking down carefully old unserviceable point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and directed.

S&F in repairs of double door type SPN DB 12 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs of double door type SPN DB 04 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 63 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs MCB SP 6 to 32 Amps,10KA, 'B' series 240V complete all as specified and directed.

S&F in repairs MCB SPN 40 to 63 Amps,10KA 'C' series 240V complete all as specified and directed.

M&L sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Notes:- (a) Colour coding shall be followed as: (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. (b) Three runs of copper conductor cable 6 sq mm and one run of PVC conduit shall be termed one unit.

M&L concealed point wiring with FRLSH PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC conduit not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of metal Shunken box/ hylem sheet fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete including making good disturbed surfaces with CM (1:3) to match with the existing surface and existing colour, complete all as specified and directed for the following :- Notes:- a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electric wiring above ceiling shall be drawn through medium grade PVC conduit

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on same board.

One 5A flush type switch socket point on independent board

M&L concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLSH grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm conduit with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLSH grade green colour as earth continuty conductor connected to common earth dolly with and including shankin box/ hylem sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete and making good disturbed surfaces with CM (1:3) to match with the existing surface & colour, complete all as specified and directed. Notes:- Colour coding shall be folowed as: (i) Phase-Red/Yellow/Blue (ii) Neutral - Black (iii) Earth- Green (iv) Switch socket shall measured & paid separately.

S&F in repairs of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S&F switch piano flush type single pole one way ,5/6 Amps complete all as specified and directed.

S&F switch sockets combination box type 3 pin 5 Amps flush type 230 Volts AC complete all as specified and directed.

S&F switch socket combination box type multi purpose 3 pin 15 Amps controlled by one switch flush type 230 Volts AC complete all as specified and directed.

S&F fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed all as specified.

S&F Lamp holder insulated body with back plate for batten fittings complete all as specified and directed.

S&F exhaust fan 300 mm sweep strudy engineering plastic complete with with lovers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wall as it where required and , connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site and including taking down old unserviceable Exhaust fan from building depositing to MES store yard complete all as specified and directed.

Supply and fixing in repair of 9 watt pin type LED bulb complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser 1x5Watt, 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED wall light fitting with high out put diffuser 1x9Watt lED lamp B22 base (lvory white/ warm), 270V AC, IP22 decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED lights fitting 1x20W, 230V, AC dcorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable Building Sec light fitting and taken as credit including supply & Fix 25W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket including all accessories complete all as specified and directed.

Supply , laying, jointing and testing cable XLPE insulated armored heavy duty electric cable with aluminum conductor 1100 volt grade of size 50 Sqmm 4 core complete all as specified and directed.

Excavation in trenches in not exceeding 1.5 mtr vide and 1.5 mtr in depth and getting out in soft/loose soil for laying of under ground cable complete all as specified and directed.

Returning filling in including spreading, levelling, watering pipe lines etc and well ramming in layers in soft/loose soil not exceeding 25cm thick complete all as specified and directed.

Removing of surplus excavated material to a distance n. exc 50 mtr and deposing where directed at a level n.exc 1.5 mtr from the starting point complete all as specified and directed.

M&L sand cushing in trenches for cable protection complete all as specified and directed. Note : Punned thickness shall be measured for payment purpose.

Supply and laying of bricks common brunt clay locally available best quality laying in trenches across the cable for protection complete all as specified and directed.

S&F GI water tubing medium grade (ISI marked) laid in trenches including fittings as required as site and including jointing internal as specified of size as following

GI tubing 40 mm dia bore

GI tubing 15 mm dia bore

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe (PVC connection of 15 mm bore with PTMT nut of length 450 mm suitable for hot water and cold water for geysers) including fixing arrangement like clamps , nuts, bolts washers, suitable type of fashner and making good the disurbed surfaces as per existing etc and taking down old unserviceable Geyser from building depositing to MES store yard complete all as specified and directed.

Supply and fixing stop valve cast copper alloy high pressure with crutch or butterfly handle 15 mm bore complete all as specified and directed.

Supply and fixing sheet metal enclosure with socket plug top single phase and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 amps, B curve complete all as specified and directed.

S&F Bib tap,fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply, fabrication, installation, connecting, testing and commissioning of LT electrical panel board, AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, indoor type, fabricated with 2 mm thick made of CRCA, powder coated , CPRI Approved , bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars 4 Nos, 200 amps capacity insulated with colored PVC sleeves mounted on suitable insulators and separators, holes drilled for connections, complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the following:- INCOMING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type, 160 Amps with breaking capacity 25 KA - 01 No (b) On load change over switch -disconnector or manual changeover open execution 200 Amps 4 pole 415 volts including operating handle

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 complete all as specified and directed including testing on completion.

Notes :- (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be deemed to be included in the rate quoted (iii) On testing after completion if the desired earth resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 25×4mm means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete alll as shown in electrical plate No 3 of SSR part-I including welding with suitble electrode and testing complete all as directed. Note :- (i) Main earthing strip from earth plate electrodeto test point upto length of 7.5 mtrs length shall deem to be included in the unit rate quoted against this item. (ii) M&L Tubing GI med grade 40mm dia for protection of earthing strip and passing the Road/passes and etc.shall deem to be included in the unit rate quoted against this item. (iii) On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .

NOTE :- An amount of Rs. 1,37,515.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S A.N CONSTRUCTIONs (BID ID -3337669)

M/S Tajamul Ah Buchh (BID ID -3348578)

AHMED CONSTRUCTIONS AND INFRA PVT LTD (BID ID -3348366)

M/s Bashir Enterprises (BID ID -3340001)

m/s zeal construction co (BID ID -3347813)