COMPLETION OF INCOMPLETE WORK OF PROVN FOR INF BN NO. 1 (PH-II) AT UPPER BIRPUR, TENGA

Amount

BUILDINGS / WORKS (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDINGS / WORKS” as listed in Schedule ‘A’ Part-I Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 21,49,367.80 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE, SITE DEVELOPMENT, EXCAVATION AND EARTH WORK (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “SITE CLEARANCE, SITE DEVELOPMENT, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 9,19,446.18 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 56034.77 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION ” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 45176.36 inserted by the MES in Schedule ‘A’ Part-IV.

EXTERNAL WATER SUPPLY (Sch 'A' PART-V)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 96,934.10 inserted by the MES in Schedule ‘A’ Part-V.

EXTERNAL ELECTRIFICATION (Sch 'A' Part-VI)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 127847.52 inserted by the MES in Schedule ‘A’ Part-VI.

SEWAGE DISPOSAL (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 379297.9 inserted by the MES in Schedule ‘A’ Part-VII.

AREA DRAINAGE (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 911379.63 inserted by the MES in Schedule ‘A’ Part-VIII.

ROAD, PATH, CULVERT (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(ROAD, PATH, CULVERT)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 300577.14 inserted by the MES in Schedule ‘A’ Part-IX.

SECURITY FENCING (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(FENCING / GATE)” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 5,79,864.06 inserted by the MES in Schedule ‘A’ Part-X.

RETAINING WALL AND RIVER DRAINING WORKS(Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(RETAINING WALL)” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 23,78.446.89 inserted by the MES in Schedule ‘A’ Part-XI.

LIGHTNING PROTECTION (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 30,304.74 inserted by the MES in Schedule ‘A’ Part-XII.

MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-XIII)

INTERNAL ELECTRIFICATION M&L point wiring with 1.5 Sqmm (nominal area) fire retardant, PVC insulated 1100 volts grade multi stranded copper conductor single core cable drawn through and including PVC concealed conduits of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for:-

One light point controlled by one, one way switch

One fan point controlled by one way switch

One socket outlet point 5 A on independent board

All as per item No. 13.01 but with 2.5 sqmm cable for 15 Amp socket on independent board and 1.5 Sqmm for earth continuity conductor.

Point wiring with 1.5 sqmm (nominal area) fire retardant PVC insulated 1100volts grade multi standard copper conductor single core cable drawn through and including ERW steel conduit of adequate size and fitings and accessories concealed in walls,floors and ceilings including PTFE (Teailon) type sealing of joints and including PVC insulated and unseathed single core solid copper conductor cable of 1.5 sqmm green in colour as earth continuity connected to common earth and earth dolly for the following points:- Note: one end of conduit of wiring shall be connected to flameproof fitting and other end shall be connected to switch outside the hazardous area

one light point controlled by one,one way switch

Supply & fix co-axial socket suitable for TV cable connection complete all as specified and directed

M & L for point wiring with co-axail cable twin core concealed with PVC conduit superior quality incl all accessories for co-axail TV cable connection complete

S & F surface mounting CFL luminaire suitable for 2 X 36 Watts CFL lamp incl yellow colour lamps, complete with all standard accessories and electrically connected complete all as specified. (Model No BLWS236 of Bajaj or eqv in Crompton Greaves/Philips/Havells).

Supply & Fixing box type luminaire fitting for single 1 x 36/40 watt fluorescent lamp comprising of electronic ballast,capacitor,lamp holders, connectors block etc,prewired suspended from ceiling by provinding stiff pendent of 20 mm dia all as specified and directed including electrically connecteing with twisted three core PVC insulated flexible cord of 0.50 Sqmm copper conductor from ceiling rose to light fitting complete Note: (a) stiff pendant will be measured and paid seperately (b) Fluorescent lamp will be issued under Sch B free for fixing (c) Mobel no BJCEB 136/140 of bajaj or equivalent of crompton greaves/havels as approved by GE

Supply & fixing only on wall/ceiling box type luminaire fitting for single 1 x 36/40 watt fluorescent lamp comprising of electronic ballast,capacitor,lamp holders,connector block etc. prewired including provision of PVC round block and electrically connected with twisted three core PVC insulated flexible cord of of 0.50 Sqmm copper conductor from ceiling rose to light fitting complete Note :- (a) Fluorescent lamp will be issued under Sch B free for fixing (b) Mobel no BJCEB 136/140 of bajaj or equivalent of crompton greaves/havels as approved by GE

Fixing only on ceiling ,surface typr mirror optics luminaire fitting for double 2 x 36/40 watt fluorescent lamp comprising of electronic ballast,capacitor,lamp holders, connectors block etc,prewired including provision of PVC round block and electrically connected with twisted three core PVC insulated flexible cord of of 0.50 Sqmm copper conductor from ceiling rose to light fitting complete a) Fluorescent lamp will be issued under Sch B free for fixing b) Model no TCS 306/236 HF of Phillips or equivalent of bajaj /havels

Fixing only on ceiling ,recess type mirror optics luminaire fitting for double 2 x 36/40 watt fluorescent lamp comprising of electronic ballast,capacitor,lamp holders, connectors block etc,prewired including provision of PVC round block and electrically connected with twisted three core PVC insulated flexible cord of of 0.50 Sqmm copper conductor from ceiling rose to light fitting complete a) Fluorescent lamp will be issued under Sch B free for fixing b) Model no TCS 306/236 HF of Phillips or equivalent of bajaj /havels

S & F intergral post top luminaire with clear acrylic cover suitable for 1 x 18 watt CFL complete incl.all sccessories ,lamp and electical connection with and incl suitable size of copper conductor cable from distribution board to light fitting,mounted on and incl 50 mm dia GI tube (M) ,grouted to PCC platform,light fitting mounted at a height of 600 mm from GL incl PCC platform complete all as specified and as directed .Make BRPTI 118 C of Phillips or equivalent in Bajaj/Crompton Greaves/havells complete

S & F wall bracket luminiarw suitable for 2 x 9 watt CFL incl all connected accessories Model No WALLBRITE of havells or equivalent in Crompton/Bajaj/Phillips complete a)CFL 9 Watt shall be issued under Sch B free for fixing

S & F wall mounting luminaire suitable for 1 x 15 watt CFL incl lamp and all connected accessories Model No CLIMA 1 of havells or equivalent in Crompton/Bajaj/Phillips complete

S&F for mirror light fitting/surface mounting suitable for 11W CFL as per Cat Part No BJC 111 of Bajaj Make or equivalent in Crompton Greaves/Philips. (Notes : CFL 11 W will be issued under Sch 'B" as free for fixing )

S&F bulk head luminaire suitable for 1 x 18 Watt CFL including lamp. (Make : CBH 18 of Cromton Greaves or equivalent in Bajaj/Philips)

S&F circular luminaire suitable for 1 x 25 watt CFL lamp incl all connected accessories end, CFL lamp, Model No CDL BCS 1901 of Philips or eqv in Havell's/ Crompton Greaves/Bajaj.

Supply and fix,commission and test building security light luminaires complete with lamp,lamp holder,choke(as appilcable), acrylic diffuser and standard fittings/accessories for CFL 1 x 36 Watts as per Model No BJSLA 136 of Bajaj or equvilant of Crompton/Phillips make .The unit rate quoted shall deem to include fixing by and including 25 mm bore light grade GI pipe (as per the opening in luminaire) bracket of adequate length ( not less than 1.20 m)clamped to building using appropriate size of clamp , nuts and bolts and electrically connected with and including 3 x 0.5 sqmm PVC insulated copper conductor cable from ceiling rose/connector to street light luminaire. Clamp shall be fabricated out of MS flat of size 25 x 3 mm

Supply and fix epoxy powder coated distribution box TPN 4 way, double door, grouted flush to walls vertical system.

Supply and fix epoxy powder coated distribution box SPN 8 way for MCBs grouted flush to wall double door complete

Supply and fix epoxy powder coated distribution box SPN 8 way for MCBs grouted flush to wall double door.

S&F MCBs of min 10 KA rupturing capacity of the following rating and to be housed in DBs catered here in before complete all as specified :- Item Continued as 13.26 to 13.35

(a) Isolator 4 pole, 63 Amps, 440 Volts.

(b) Isolator 4 pole, 32 Amps, 440 Volts.

(c) Isolator 4 pole, 40 Amps, 440 Volts.

(d) MCB TPN 32 Amps.

(e) MCB SPN 63 Amps, 240 Volts.

(f)MCB SPN 40 Amps, 240 Volts.

(g) MCB SPN 6-32 Amps, 240 Volts.

(h) MCB SP 40 Amps, 240 Volts.

(i) MCB SP 6 - 32 Amps, 240 Volts.

(j) Blanking plate

M&L for Sub main wiring with two runs of single core fire retardant PVC insulated and unsheated multistranded,copper conductor cable of size 6.00 sq mm LT 1100 volts grade drawn through and including adequate size PVC concealed conduit (not less than 20 mm bore) accessories and fittings and one run of 2.5 mm sqmm single core multistranded copper conductor cable as earth continuity conductor. Two runs of cable one earth wire and one run conduit shall be measured as one length.Cable required for connection to DBs shall deemed to be including and shall not be measured seperately. Earth wire shall run inside the conduit. Note : Extrra length of cable required for connection to MCBs shall deemded to be included in unit rate

S& F pendents stiff,comprising of connector cast iron or brass back plate,2.0 mm stove enamelled screwed steel conduit upto 1.50 mtr length as ordered with two checks nuts for fixing tubelight fitting comlete

S&f flame proof light fitting suitable for 1 x 36/40 W fluorescent lamp as per Cat part no BJFFTL 140,Bajaj make or equivalent in Crompton greaves/phillips Note: Fluorecent lamp will be issued under Sch B as free for fixing

Supply and fixinf flameproof exhaust fan AC single phase 230V of size 300 mm sweep with louvers symphony type and all othe connected accessories including electrically connecting to exhaust fan. Make Sudhir or equivalent makes

HOT WATER SUPPLY Fixing only heater water storage type electric geyser 50 ltrs capacity including fixing arrangement and including supply and fix PVC connected pipe of suitable length for hot and cold water complete Note: Heater water storage type will be issued under Sch B free for fixing

All as per item no 35 hrer-in-before but of capacity 25 ltrs

EXTERNAL WATER SUPPLY S/F CI sluice valve double flange conforming to IS 14846 both end flanged class PN 1.0 of size 80 mm dia incl nessary nus,bolts,washer and gasket complete

INTERNAL WATER SUPPLY Supply and fix 3 layered (outer green coloured UV stabilized,middle black coloured UV stabilized and innermost layer white coloured with antimicrobial property) fusion welded PP- R (polypropylene Random Co -Polymer) pipes and fittings including plain PP-R fitting and brass threaded PP-R fittings and clamping,cutting and making good to the damages of grade PN -16,SDR-7.4 concealled in wall/floors of following sizes: Item Continued as 13.44 to 13.45

(a) 20 mm bore

(b) 25mm bore

Supply and fix 3 layered (outer green coloured UV stabilized,middle black coloured UV stabilized and innermost layer white coloured with antimicrobial property) fusion welded PP- R (polypropylene Random Co -Polymer) stop/ball valve with handle, screwed both ends for PP-R pipes or for unions fixed all as specified of grade PN-16,SDR-7.4 and size 25 mm bore light weight complete allas specified and directed Item Continued as 13.47 to 13.48

(a) 25 mm bore

(b) 20mm bore

Supply and fix brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed

Supply and fix shower rose chromium plated with or without swivel joints 70 mm dia incl fixing to steel pipe or union 15 mm bore complete

EXTERNAL ELECTRIFICATION AND SEWAGE TREATMENT PLANT Fixing only street light fitting FTL complete with perspex cover,reflector,choke,starter,bipin holders etc for 1 x 40 watt fluorescent tube. The cost includes fixing by 40 mm bore medium grade GI pipe (as per the opening in luminaire) bracket of length not less than 1.50 mtrs clamped to poles with and including appropriate size nuts & bolts and electrically connected from over headline to street light luminaire. Clamp shall be fabricated out of MS flat 40 x 3 mm note: Street light fitting and FTL will be issued under Sch B as free for fixing

S&F time switches 250 V single phase of 20 Amps rating with contactor fitted inside the steel enclosure complete

Laying only including testing, jointing and commissioning of LT under ground cable, 1100 volts grade, PVC insulated and PVC sheathed heavy duty armoured with multistranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified. Item Continued as 13.54 to 13.56 NOTE : 1. Clamps, sand cushioning, PCC/Brick protection, GI pipes for cable protection, excavation/ earthwork are out of the scope of this item and shall be measured and paid under separate items catered for in this schedule. 2. Cables will be issued under Sch 'B' as free for fixing/laying.

a) 6 Sqmm 2 core

(b) 10 Sqmm 2 core

(f) 50 Sqmm 3.5 core

M & L for brick protection cover to LT under ground cables with sub class B over burnt bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10 mm

Supply,install,testing and commission of Central Sewage Plant of caspacity 150 cum/assembled all -in -one package Model No FMR 150 of ION Exchange or equivalent in thermax,consisting of the following equipments and including making all necessary electric connection from existing source piping etc complete as per rmanufacturer's specifcation and as directed. EQUIPMENT DETAILS a)RCC FMR Tank inside epoxy painted ,all fittings inside i.e Lamella plate settler should be MS ,FRP coated b) Sludge transfer pump- 02 Nos of adequate capacity c) air blowers- 02 Nos as per Manufacturer specification d) Lamella Plate Clarifier - as per Manufacturer specification e)Chemical dazing system -01 No as per Manufacturer specification f) All civil works as per Manufacturer specification Note:- 1 Cost of PCC platform and all other relevant civil works shall be deemed to be included in the unit rate 2. Instsallation,testing and commissing of the plant shall be carried out through authourised representative of the Manufacturer

Supply and install Non Clog Sewage Centrifigual,electric driven pump including 3 phases.415 volts motor of suitable rating of 10HP for sewage containin solids upto 2.5" size including all necessary electrical and piping connections complete al as specified and directed

S & fix atomotic star-delta starter 3 phase,50 hz,415 V of relay range 9-14 Amp rating on LT pannel with necessary arrangement and connection of the U/G cable to pump motor of 12.5 HP complete all as specified

S/F MCB SPN-16 Amps rating with 2 way DB fixed to wall with wooden box and necessary arrangement for connection of air blower for chlorination plant with 2 core 6 sqmm U/G copper conductor cable complete

Supply and lay ductible iron pipe centrifugally cast (spun) with spigot and socket ends conforming to IS 8392/2000 in standard length of classification K9 100 mm dia suitable for push -on joints (Rubber joints D jointing) with cement mortar lining inside the pipes without side zinc coating including necessary masonary support wherever required complete

All as per item no 13.63 here-in before but 150 mm dia

S/F CI sluice valve double flange conforming to IS 14846 both end flanged class PN 1.0 of size 150 mm dia incl nessary nus,bolts,washer and gasket complete

All as per item no 13.65 here-in before but 100 mm dia

S/F pressure meter with valve ranges from 0 kg per square mm to 500 kg per sqmm on outlet of transfer pumps including 15 mm dia Gate valve complete all as specified

ROAD WORK Precast PCC (1:2:4) Type B1 Solid Block of size 200 x 100 x 100 mm as in continuous road edging laid dry on end vertically including necessary excavatioin and earth work complete all as specified and directed.

Sub total

DISMANTLING / DEMOLITION (Sch 'A' Part-XIV)

Lump sum price worked out by the Contractor for “(DISMANTLING / DEMOLITION)” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 63,466.70 inserted by the MES in Schedule ‘A’ Part-XIV.

H P CONSTRUCTIONS