WELCOME MAINTENANCE AT SOC HR BARRACK HAUDIN ROAD ETC UNDER AGE B/R (CENTRAL) OF GE (SOUTH) BANGALORE

Amount

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying one coat of white wash including cleaning of splashes of white wash on floor/objects etc complete all as specified and as directed.

M&L for preparation of old distempered surfaces of ceilngs and applying one coat of oil emulsion distemper including cleaning splashes of distmeper on floor/objects etc complete all as specified and as directed.

S&F in repair 12 mm thick gypsum board in ceiling fixed on frame work of GI sheet section, the main runner of 22 gauge GI sheet and cross runner of 24 gauge GI Sheet must be framed to form a mesh 0.6 x0.6 mtr centre, the gypsum board must be fixed to GI frame and joint to be properly filled in with POP paste and paper tap to get a levelled to smooth ceiling. Recessing of Gypsum board for fixing for light fixurs must be done with extra frame work of GI to hold the concealed light fixture etc including two or more coats of Plastic emuslion paint on ceiling with putty work designer complete all as specified and as directed.

S&F 10 mm thick plaster of paris (gypsum anhydrous) ceiling sunk or riased moulding upto a height of 5 m above floor level , over first class kail wood strips 25x6 mm and necessary frame work as per manufacture instructions with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and as directed.

M&L for preparation of old distempered surfaces of walls and applying two coats of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and as directed.

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer over 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and as directed.

M&L preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for injecting of cement slurry with water proofing compound in CM 1:2 in stone masonery wall, cement slurry to be injected min 300mm depth of joint with injecting pump and making good the damage portion by pointing complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M & L for applying two coats of Oil bound distemper on newly plastered surfaces of walls incl preparation of surfaces and applying one coat of alkali resistant priming paint complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finising the surfaces even and smooth without using extra cement including taking down complete all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified including hacking out any thickness complete all as specified and as directed.

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane in metal frame including hacking out any thickness complete all as specified and as directed.

S&F in reapir 15 mm bore stop valves, fancy type chromium plated incl (concealed part) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F in reapir 15 mm bore angle cock with wall flange, fancy type chromium plated (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repair 15 mm bore two way angle cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repair 15 mm bore single lever basin mixer with 450mm braided connection pipe (without pop-up , fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 600 mm long complete all as specified and as directed.

S&F in repair 15 mm bore Bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete all as specified and as directed.

S&F in repair vitreous china washdown down water closet set incl internal fittings complete of size 710x390x790mm snow white colour washdown water closet pan & trap (One peace) with soft close seat cover with mild steel chromium plated or aluminium hinginng device incl all joints incl connection to drain pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia pipe required length for Nahani trap along with grating and testing manholes as specified by filling with water upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin snow white counter top of size 750x380x130 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and cutting fair pinning in ends of brackets complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bend etc.complete all as specified and as directed.

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable Pedstal type WC complete all as specified and as directed.

S&F sink in repair with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 410mm x 330mm x 160mm (minimum), including PVC waste pipe 40 mm dia complete all as specified and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and as directed.

S&F in repairs brass chromium plated Shower Rose 125 mm size complete all as specified and as directed.

S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified and as directed.

S&F in repair 40 mm dia PVC waste pipe for SS Kitchen sink complete all as specified and as directed.

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs fancy type brass bracket with screws 25 mm dia including wooden plugs sutable for curtain rods complete all as specified and as directed.

S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs complete all as specified and as directed.

S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia complete all as specified and as directed.

S&F in repairs 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified and as directed.

S&F in repairs stainless steel 100 mm butt hinges for doors complete all as specified and as directed.

S&F in repairs Aluminium anoidsed barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified and as directed.

Dismantling boarding, any description, fixed any position with nails.

M&L 18 mm thick Veneered decorative plywood,grade 1(with BWR resin) with decorative face veeners on one side fixed with screws to timber frame work & another side painted with 2 coats of synthetic enamel paint over a coat of pink primer coat fixed with screws to timber frame work complete all as specified and as directed.

S&F 18/19 mm thick Pre-laminated particle board, exterior grade, prelaminated two sides with decorative choice lamination & other side balancing white lamination fixed with invisible screws to timber frame work etc complete all as specified and as directed.

M&L 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area exc 13 sqcm but n.exc 25 sqcm complete all as specified and as directed.

S&F Met craft steel soft close clip on 3D Hydraulic concealed Hinges for half overlay door of pair (8 Degree crank ,Silver complete all as specified and as directed.

S&F Godrej cold rolled steel soft close drawer channel runner telescopic ball bearing (350mm/14 inch, loading bearing capacity 35 kg, Zinc) 1 pair, item weighing not less than 500gm/piece, complete all as specified and as directed.

S&F Home Decorax Traders civic Stainless steel Kitchen Cabinet handels pack of 2 with crome finish including bolts for fixing complete all as specified and as directed.

M&L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing over 20 mm scred bed in CM 1:6 complete all as specified and as directed.

Supply and fixing in repairs kitchen sinks of Stainless steel 1.00mm thick with plugs, washers and waste pipes and cast iron cantilever brakets including and connecting union to pipe over all size 495mm X 420 mm bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

Supply and fix in repair Stainless Steel Plate rack of size 95 x 85 CM complete all as specified and as directed.

S&F in repiar stainless steel sink cock ( table mounted) with angular knob complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for re-fixing or removal to store.

M&L 15 mm medium grade galvanised water tubing, with all fitting and fixed complete to walls and ceilings or laid in floors conealed type complete all as specified and as directed.

S&F in repair 100 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F colour Glazed ceramic tile in vertical surface 300x200x7 mm thick set over 10 mm thick rendering on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4. and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) complete all as specified and as directed.

M & L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.50 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and as directed.

S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including disconnecting existing tanks as in repair complete all as specified and as directed.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as in repairs complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as in repairs complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, upto 5th floor of bldgs complete all as specified and as directed. (Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto 5th floor of bldgs complete all as specified and as directed.

S&F 75 mm long but hinges, medium weight, cold rolled mild steel and fixed.

S&F 100 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs

S&F 100 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs all as specified.

Taking down shutters of any description exc 1Sqm but n.exc 2 Sqm and refixing in the same opening complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick 1st class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 100 mm long but hinges, medium weight, cold rolled mild steel and fixed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed complete all as specified and as directed.

S&F 150 mm long mild steel pressed handles oval type, stove enamelled black.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repair Mild steel 2 levers mortice lock, vertical type, size 100mm complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair aluminium (Die cast body) door closer hydraulically requlated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 Kg and fixed complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm complete all as specified and as directed.

S&F powder coating aluminium frame for doors, windows vetilators with one or more rebates incl joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium spap beading, screws etc complete all as specified and as directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and as directed.

S&F stainless steel mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F 3.0 mm thick sheet glass ordinary quality and glazing with suitable section in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with suitable section in square exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 12 mm thick Prelaminated particle, board, exterior grade, prelaminated both side with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

S S CONSTRUCTIONS

G Janardhan Reddy