Construction of additional rooms at Govt Senior Secondary School Kakkar Distt. Hamirpur

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Columns, piers, abutments, pillars, posts and struts

Providing and laying in position specified grade of Reinforced cement concrete work design mix M-25 (M-twenty five) with minimum cement contents not less than 400kg (four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to all floor level, including cost of centering, shuttering, finishing and reinforcement as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government.

Steel reinforcement (Tata Tiscon/sail make) for Reinforced cement concrete work including straightening, cutting, bending, placing in position and including cost of binding wire all complete upto all floor level. Thermo-Mechnically Treated bars of grade Fe-500D or more including carriage of materials with in all leads, lifts as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm(ten millimetre) wide 12 mm(twelve millimetre) deep complete in cement mortar 1:6 (one cement : six coarse sand)Above plinth level upto floor all level as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in foundations and plinth in cement mortar 1:4 (one cement : four coarse sand)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Structural steel (Tata/Sail make) welded in single/built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in trusses and trussed purlins in building as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.