Purchase of Implants

D.H.S. Plate Long/short Barrel (38/25 mm)with Round, D. C., combi Hole 1250, 1300, 1350, 1400 Angle; 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 holes

D.H.S Screw 22mm /16mm threading with Compression Screw (Top-Bolt). (36 mm) 50 to 115 mm, in 5mm increments

Pediatric D.H.S. Set

D.C.S Plate (950) with Round, D. C., combi Holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 holes

Angle Blade Plate (950) with Round, D. C., combi Holes, Blade size 50, 55, 60, 65, 70 & 75 mm and 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 holes

Trochanteric Stabilisation Plate to be used with DHS

Distal Femur Locking Compression Plate (Right & Left) Anatomical pre-shaped & Contoured with self-tapping Locking Head Screws; with Round Locking Holes for metaphyseal portion of plate & Combiholes for shaft of plate.

Medial & Lateral Proximal Tibial Buttress Plate (T- & L- shape)- as per AO specifications. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Proximal Medial & Lateral Tibial Plate 3.5 mm(Right & Left) Anatomically pre shaped and low profile. Two different plate design for left and right side with indication on side of plate. Plate should have 2 mm holes for Proximal Fixation with k-wire and sutures for meniscal repair. Holes should accept 3.5 mm locking head or 3.5 mm Standard Cortical Screws from 4 to 20 holes with increment of 2 holes.

Proximal Medial/ Lateral Tibial Locking Plate for 4.5 mm screws Anatomically pre shaped and low profile design, two different plate design for left and right with indication on plate. Round metaphyseal locking holes and combi holes in shaft portion for locking and standard screws. Different angulation in proximal part of the plate to avoid primary and secondary loss of reduction. Should be compatible for less invasive technique Holes should accept 5 mm locking head or 6.5 mm standard cancellousl screws from 5 to 13 holes

Hockey Plate For Tibia (Right & Left) 5, 7, 9, 11, 13, 15, 17 Holes

Contoured Medial/ Antero-lateral Plate for Lower end Tibia 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Distal Medial Tibial Locking Plates 2.7/ 3.5 mm. Anatomically pre-shaped and low profile and specific for right and left side with Indication of side on plate, compatible with less invasive fixation. Rounded edges screw heads should be received into Distal section of plate to allow multiple locking head screw placement of 2.7/ 3.5 mm to provide adequate fixation of metaphyseal portion of tibia, and size 4 to 14 holes with increment of 2 holes.

Anterolateral Distal Tibial Locking Plate 3.5 mm. Anatomically pre shaped and low profile and specific for right and left side with indication of side on plate. Plate should have head holes to accept 3.5 mm Locking head or standard cortical or 4 mm standard cancellous screw. Head should be received into the plate. Size from 5 to 21 holes with increment of 2 holes

Cobra Head Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Cobra Head Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Hook Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Hook Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Proximal Humerus Locking Plate (PHILOS Plate). Anatomically pre-countoured plates, Should have precisely fitting sleeves for precision placement ofscrews, Should accept 3.5 mm Locking Head Screws. The Screws provided should be available from 26 to 60 mm length. The head of the plate should have holes for securing tuberosities to the plate with sutures. Should have low profile of the screws heads to prevent tissue irritation 3, 4, 5, 6, 7, 8, 9, 10, 12 Holes

(A) Anatomically pre-countoured plates for Distal Medial Humerus for anatomical fit with left & right version. Should have precisely fitting sleeves for precision placement of screws. Should accept self-tapping Locking Head Screws. The shaft portions of the plate should have Combi holes. Should have low profile of the screws heads to prevent tissue irritation. 3, 5, 7, 9 & 14 Holes

(B) Dorso-lateral Plates with & without Lateral support with right & left versions. Anatomically pre-countoured plates, The shaft portions of the plate should have Combi holes. Should have low profile of the screws heads to prevent tissue irritation.3, 5, 7, 9 & 14 Holes

Calcaneal Plate.

Calcaneal Locking Plates.

Anatomical Olecranon locking plate of all sizes.

Clavicle Locking Plate- Antero-superior type, Anterior type

Clavicle Hook Plate.

Elise Plate/ Contoured Plate for Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes

Locking Elise Plate/ Contoured Locking Plate for Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes

Variable angle Locking

H-Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes

Y- Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes

D.C.P. Small. 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

D.C.P. Narrow. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

D.C.P. Broad. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

L.C.D.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

L.C.D.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

L.C.D.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

L.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

L.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

L.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes

Semitubular Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Semitubular Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

1/3 rd Tubular Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

1/3 rd Tubular Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Quarter-Tubular Plates 2.7 mm. 3, 4, 5, 6, 7, 8 Holes

Straight Mini Plates 2.0 mm & 1.5 mm with screws.

Reconstuction Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Reconstuction Locking Plates 3.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Reconstuction Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Reconstuction Locking Plates 4.5mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes

Cortical Screw 4.5 mm (TPI- 20). 14, 16, 18 …60 mm, in 2 mm increments.

Cortical Screw 3.5 mm (TPI- 20). 8, 10, 12 …60 mm, in 2 mm increments.

Cortical Screw 2.7 mm (TPI- 20). 6, 8, 10 …30 mm, in 2 mm increments.

Locking Cortical Screw 5.0 mm. 14, 16, 18 …60 mm, in 2 mm increments.

Locking Cortical Screw 3.5 mm. 8, 10, 12 …60 mm, in 2 mm increments.

Fully threaded Cannulated Cancellous Screws 4mm. 25, 30 ….115 mm, in 5 mm increment

16 mm threaded Cannulated Cancellous Screws 4 mm. 25, 30 ….115 mm, in 5 mm increment.

32 mm threaded Cannulated Cancellous screws 4 mm 25, 30…….115 mm, in 5 mm increment.

Fully threaded Solid Cancellous Screws 4 mm 25, 30…….115 mm, in 5 mm increment

16 mm threaded Solid Cancellous Screws 4 mm 25, 30,…….115 mm, in 5 mm increment

32 mm threaded Solid Cancellous screws 4 mm 25, 30,…….115 mm, in 5 mm increment

Fully threaded Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

16 mm threaded Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

32 mm threaded Cannulated Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

Fully threaded Solid Cancellous Screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment

16 mm threaded Solid Cancellous Screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment

32 mm threaded Solid Cancellous screws 6.5 mm (20 TPI) 25, 30,…….115 mm, in 5 mm increment

Fully threaded Locking Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

16 mm threaded Locking Cannulated Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

32 mm threaded Locking Cannulated Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

Fully threaded Locking Solid Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

16 mm threaded Locking Solid Cancellous Screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

32 mm threaded Locking Solid Cancellous screws 6.5 mm 25, 30,…….115 mm, in 5 mm increment

Washer Round, 13 mm, 10 mm, 7.0 mm, 4.5 mm.

Spiked Washer, 13.5 mm, 8.0 mm, 3.2 mm.

Malleolar Screw,4.5 mm 15, 20, 25,………100 mm

Herbert’s screw

Interlocking Femur Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm.

Interlocking Solid Femur Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm.

Recon Nail (Right & Left) (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm.

Proximal Femur Nail (P. F. N.) (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm.

Trochanteric Entry Femur Nails with Compatible Locking Bolts of Diameter 8,9,10,11,12 mm with lengths from 340 to 440mm.

Supracondylar Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 10,11,12 mm with lengths m150,200,250,300 mm .

Interlocking Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm.

Interlocking Distal Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm.

Interlocking High/Upper Bent Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm.

Interlocking Solid Tibia Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm.

Expert Tibial Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 8,9,10,11 mm with lengths from 280 to 380 mm.

Interlocking Humerus Nail (As per AO specifications) with Compatible Locking Bolts of Diameter 6,7, 8 mm with lengths from 200 to 300 mm.

Interlocking Bolts 2.9 mm 12 to 30 mm

Interlocking Bolts 3.9 mm 14 to 48 mm

Interlocking Bolts 4.9 mm 16 to 120 mm

Proximal Bolt RECON (As per AO specifications) of Diameter 6.4mm with lengths from 60 to 110 mm.

Proximal Bolt RECON Cannulated (As per AO specifications) of Diameter 6.4mm with lengths from 60 to 110 mm.

Proximal Bolt P.F.N. Cannulated 6.4 mm 60 to 110 mm

Proximal Bolt P.F.N. Cannulated 8.0 mm 60 to 120 mm

Kuntscher’s Nail of 7, 8, 9, 10, 11, 12 mm diameter

V-Nail

Square Nail for Ulna of2, 2.5, 3, 3.5 mm diameter

Square Nail for Radius of2, 2.5, 3, 3.5 mm diameter

Rush Nail of 2, 2.5, 3, 3.5 mm diameter

Ender’s Nail of 2,2.5,3.0,3.5, 4, 4.5 mm diameter.

Titanium Elastic Nailing System (TENS) of all sizes.

Non fenestrated bipolar prosthesis of sizes 37, 39,…………….51, 53 mm

Fenestrated bipolar prosthesis of sizes 37, 39,…………….51, 53 mm

Bipolar Prosthesis with modular stem and head.

Thompson Endo-Prosthesis of sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 mm.

Long/short stem Austin moore prosthesis of sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 mm.

Bone cement (Price to be quoted separately for the following 4 items) :- Cement Gun should be provide by the dealer as loan instruments without extra charges during Total Hip Replacement surgeries. Cost of Disposable Nozzle to be provided separately .

1. High viscosity Poly Methyl Meth-Acrylate 40gms with working time of 5-6 min.

2. Medium to low viscosity Poly Methyl Meth-Acrylate 40gms.

3. High viscosity Poly Methyl Meth-Acrylate 40gms with working time of 5-6 min with Gentamycin.

4. Medium to low viscosity Poly Methyl Meth-Acrylate 40gms with Gentamycin.

Cement stopper of size 7,8,9……to………….16mm

Calcium sulphate bone substitutes

Cemented Total Hip Replacement :-*Stem should be as per Standard Charnley’s Design with metal of sufficent strength to withstand life-time use in the patients. Different sizes and offsets to be quoted.*Cup of Polyethylene High Density High Molecular Weight Highly Crosslinked with anti-oxidative manufacturing & storing process (to increases the shelf life) with different offsets. *Cup Sizes : - 38 to 60 mm Outer Diameter. *Modularity for neck length and head sizes 22, 28, 32 and 36 mm. *Acetabular component should be metal backed as well as all poly. Metal back should have modularity to use polyethylene as well as Ceramic. All Polyethylene liner as well as cups should be made of highly Cross-linked High Molecular Weight polyethylene with measures to prevent Oxidation . The metal used for stem should be of high tensile strength and fatigue strength like Cobalt-Chrome.

Uncemented T.H.R :-*The stem of the Femoral Component should have Double Taper Geometry with Plasma Hydroxy-Appetite coating with at least thickness of the coating of 100 to 200 microns or Porous coated with sufficient pore size and thickness of porous coating to have optimal bony ingrowth. The stem should accept metal (Cobalt- Chrome) as well as Ceramic Head (Alumina with Zirconia)*Cup of Polyethylene High Density High Molecular Weight Highly Crosslinked with anti-oxidative manufacturing & storing process (to increases the shelf life) with different offsets. Preferably the cup should have longer posterior wall with flange for cement pressurization. Metal Back cup with Plasma Hydroxy-Appetite coating with design to lock into the host bone to provide primary fixation with provision for screw fixation. Should accept liners made up of Highly Cross-Linked High Molecular Weight Poly-Ethylene & Delta Ceramic (Alumina with Zirconia).*The Femoral Head should be made up of Cobalt-Chrome or Delta-Ceramic and should have different Neck length.*Metal screws for fixation of metal cup.*The Prices should be quoted separately for stems, cups liners of polyethylene and ceramic as per specifications mentioned above and as well as for metal & ceramic heads of different sizes as per specifications quoted above.

Revision T.H.R:-*Revision stem, Modular Straight Cylindrical And Double Tapered, Porous & Hydroxy-Appetite coated of different lengths. The diameter and length of the stem should be variable with a provision to address curve of the femur with long stem. *Revision cups to be provided with large diameter of upto 65 mm with augments for bone loss in the form of cages and metal rings, as well as, wedges. All these to be quoted separately.

Total Knee Replacement :- All polyethylene & metal back. Mobile bearing & fixed bearing Knees Highly polished tibial tray to prevent back wear in Fixed bearing knee. Pateller component should to be quoted separately Cruciate-Retaining/ Cruciate-Scarificing Designs. For revision, Constraint designs with Intramedullary extension . Designs for achieving high flexion. All components should be separately quoted. Note:- Company should be US-FDA /CE/ GMP certified.. Should provide a technician intraoperatively wherever applicable. Should provide suitable size cutting saw with drills (pneumatic/electric) , wherever applicable.\ Should provide all the complementary instrumentation and trials given/provided by the manufacturing company for the application of implant during operation. Catalogue/ list of these instrumentation and trials should be included in tender quotations. Only those Joint designs to be sent which have had a proven field record of longevity as substantiated by published literature, the tenderer should provide the required documents

Regular Shoulder prosthesis & Reverse Shoulder Prosthesis (Prices to be quoted separately) of size 35 mm, 39 mm

Total elbow prosthesis, Regular and custom made.

Radial head prosthesis of following sizes :-16 mm x 4 mm x 6 mm, 18 mm x 4 mm x 6 mm, 18 mm x 5 mm x 6 mm, 20 mm x 5 mm x 8 mm

Continuous loop endobutton One size titanium button with multiple pre-measured loop sizes of 15, 20, 25, 30, 35, 40mm lengths. Preloaded with polyester braid suture (#5 leading suture & #2 flipping suture)

Low- Profile Cancellous Screws Titanium 6.5 mm of sizes 25, 30, 35, 40 mm.

Spiked and suture Washers of 14 and 18 mm.

Tibial Post Fixation Screw Titanium made of Dia 6.5 mm and 30 mm length

Shaver Blades (SS alloy / platinum tip):-Single cutting: Razor sharp toothed inner blade No teeth on outer window 4mm, 4.5 mm 5mm 5.5mm Straight and angled Double Cutting: The narrow gap between inner and outer cutting surfaces 4mm, 4.5 mm 5mm 5.5mm Straight and angled

Resector: 4mm, 4.5 mm 5mm 5.5mm Straight and angled

Burr Barrel burrs 4mm, 4.5 mm 5mm 5.5mm 6 flute and 12 flute Round Burrs 4mm, 4.5 mm 5mm 5.5mm 6 flute and 12 flute

Spiked Ligament Staple Titanium made.

Cannulated Cross Pin Titanium made.

Cannulated Interference Screws- Roundhead Titanium/Bio absorbable. Standard 4.5mm hex for easier insertion and removal in diameters 8mm, 9mm, 10mm and 11mm in lengths 20mm, 25mm, 30mm and 35mm.

Cannulated Interference Screws- Fully Threaded Titanium/Bio absorbable in diameters 8mm, 9mm, 10mm and 11mm , in lengths 20mm, 25mm, 30mm and 35mm

Braided Composite suture (i.e. Bio Fiber/fiber wire) multi-strand,long chain ultra-high molecular weight polyethylene (UHMWPE) core with a braided jacket of polyester and UHMWPE. Tapered ,cutting ,reverse cutting and diamond end ,3/8 circle and 1/2 circle. white; white/blue; white/green colours. USP size 2/ EP size 5. length 38 inches/90 cms.

Braided polyester suture( i.e. Ethibond ), 2-0 and 5-0 with 4 strands braided, sterile, surgical suture composed of Poly (ethylene terephthalate). prepared from fibers of high molecular weight, long-chain, linear polyesters having recurrent aromatic rings as an integral component. coated with polybutilate or poly {oxy-1, 4 butanediyloxy (1, 6-dioxo-1, 6 hexanediyl)

5mm synthetic, braided, non-absorbable suture (i.e. Mersilene tape)

Titanium Interference screws for ACL repair. Sizes 8 mm, 9 mm, 10 mm, 11 mm, 12 mm.

Titanium Endo-Button.

Titanium Endo-Disc.

A.O. Open / closed Clamps, 2.5, 3.5, 4.5 mm.

Cylindrical/ Universal Clamps, 2.5, 3.5, 4.5 mm

Rod to Rod Clamp.

Transverse Clamp.

Cortical Schanz Pin 2.5,3.0,3.5,4,4.5 mm.

Cancellous Schanz Pin 5,6 mm.

Tubular Rod.

Connecting Rod of 4, 5, 8, 10, 11 mm diameter. 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”.

A.O. Type External Fixator R/U.

Finger Distractor.

Radius Ulna Distractor.

Rail Road Fixator for Femur / Tibia.

Illizarov’s Ring Fixator. Half Ring of 80, 100, 120, 140, 160, 180, 200, 220, 240 mm.

Italian Femoral Arches 900, 1200. 80, 100, 120, 140, 160, 180, 200, 220, 240 mm.

Multiple Fixation Clamps.

Schanz Pin Fixation Bolts.

Oblique Supports.

Threaded Rods 8 mm diameter. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450 mm.

Telescopic Rods. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400 mm.

Male & Female Post, 2, 3, 4, 5 hole set

Male & Female Hinges, 1 hole set.

Connection Plates, 5, 6, 7, 8 holes.

Twisted Plates, 5, 6, 7, 8 holes.

Illizarov’s Wires Bayonet Type. 1.5, 1.8, 2.0 mm.

Illizarov’s Wires Olive Type. 1.5, 1.8, 2.0 mm.

Connecting Bolt.

Connecting Nut 10 mm.

Wire Fixation Bolts Cannulated.

Wire Fixation Bolts Slotted.

JESS External fixator set.

Pelvic C Clamp.

Nails for Pelvic C Clamp.

Steinman Pin of 3, 3.5, 4, 4.5, 5 mm.

Denham Pin of 3, 3.5, 4, 4.5, 5 mm.

Kirschner Wire double ended Trocar Tip/ Threaded Tip. Diameter 1,1.2, 1.5,1.8 2, 2.5, 3 mm. Length 6”, 9”, 12”.

S.S. Wire Reel of 16 to 28 Gauze.

Knowel’s Pin.

A.M. Pin.

Gigli Saw Wire.

Titanium Pedicle Screw connecting Rod Set (MRI- compatible).

Titanium Cage (MRI- compatible) 10mm, 13mm, 16 mm, 19 mm.

Titanium Staple (MRI- compatible).

Titanium Transverse Connector (MRI- compatible).

Titanium Mono-Axial Screws (MRI- compatible) 5.3 mm 30 mm, 35 mm, 40 mm, 45 mm.

6.0 mm 30 mm, 35 mm, 40 mm, 45 mm.

Titanium Poly- Axial Screws (MRI- compatible)

5.3 mm 30 mm, 35 mm, 40 mm, 45 mm.

6.0 mm 30 mm, 35 mm, 40 mm, 45 mm.

Hartsheel Implants for Spine (MRI- compatible).

Cervical Plates (MRI- compatible).

Harrington Rod System (MRI- compatible).

Mono axial locking screw 4.5 mm, 5.5 mm, 6.5 mm diameter 30-50 mm with 5 mm of increament.

Mono axial locking screw 6.5 mm diameter (Iliac screw) , 60 – 75 mm with 5 mm of increament

Cross link (Inter connector) 5 mm

Cervical H-plate ordinary hole 4 hole, 20 – 35 mm with 2.5 mm of increament

Cervical H-plate ordinary hole 6 hole, 35 – 55 mm with 2.5 mm of increament

Cervical H-plate ordinary hole 8 hole, 47.5 – 65 mm with 2.5 mm of increament

Cervical spine locking plate 5 hole, 25, 29, 33 mm

Cervical spine locking plate 8 hole, 37, 41, 45 mm

Drummonds wire without button

Drummonds wire with button

Sublaminar wire 12”

Sublaminar wire 18”

Disposable Pulse Lavage Tubings.

Modular Proximal Femur replacement prosthesis.

Modular Distal Femur replacement prosthesis.

Modular Proximal Tibia replacement prosthesis.

Modular Proximal Humerus replacement prosthesis.

Titanium 1.5 mm 20 Hole continous

Titanium 1.5 mm 2 hole with gap

Titanium 1.5 mm 3 hole with gap

Titanium 1.5 mm 4 hole with gap

Titanium 1.5 mm 6 hole with gap

Titanium 1.5 mm 8 hole continuous

Titanium 1.5 mm L Plate Left

Titanium 1.5 mm L Plate Right

Titanium 1.5 mm Orbital plate 4 hole with gap

Titanium 1.5 mm Orbital plate 6 hole with gap

Titanium 1.5 mm T Plate

Titanium 1.5 mm X Plate

Titanium 1.5 mm Y Plate

Titanium 2 mm 16 hole continuous

Titanium 2 mm 2 hole with gap

Titanium 2 mm 3 hole with gap

Titanium 2 mm 4 hole with gap

Titanium 2 mm 4 hole continuous

Titanium 2 mm 6 hole with gap

Titanium Leg screw 2.5 mm X10 mm

Titanium Leg screw 2.5 mm X12 mm

Titanium mesh 2”x2”

Titanium mesh 4”x4”

Titanium mesh 6”x2”

Titanium wire mesh 8”x2”

Titanium Rconstruction plate with condyle left long ramus (24 hole )

Titanium Rconstruction plate with condyle left short ramus (20 hole )

Titanium Rconstruction plate with condyle right long ramus (24 hole )

Titanium Rconstruction plate with condyle right short ramus (20 hole )

Titanium Rconstruction plate without condyle left long ramus(24 hole )

Titanium Rconstruction plate without condyle left short ramus(20hole

Titanium Rconstruction plate without condyle right long ramus(24hole

Titanium Rconstruction plate without condyle right short ramus (20hole

Titanium Screw 1.5 mm x 10mm

Titanium Screw 1.5 mm x 12mm

Titanium Screw 1.5 mm x 4mm

Titanium Screw 1.5 mm x 6mm

Titanium Screw 1.5 mm x 8mm

Titanium Screw 2 mm x 10mm

Titanium Screw 2 mm x 12mm

Titanium Screw 2 mm x 14mm

Titanium Screw 2 mm x 4mm

Titanium Screw 2mm x 6mm

Titanium Screw 2 mm x 8mm

Titanium Screw 2.5 mm x 10mm

Titanium Screw 2.5 mm x 12mm

Titanium Screw 2.5 mm x 14mm

Titanium Screw 2.5 mm x 4mm

Titanium Screw 2.5 mm x 6mm

Titanium Screw 2.5 mm x 8mm

Titanium 2 mm orbital plate 6 hole with gap

Titanium 2mm T plate

Titanium 2mm x plate

Titanium 2mm Y plate

Titanium 2.5 mm 16 hole continues

Titanium 2.5 mm 2 hole with gap

Titanium 2.5 mm 3 hole with gap

Titanium 2.5 mm 4 hole with gap

Titanium 2.5 mm 6 hole with gap

Titanium 2.5 mm 8 hole with gap

Titanium 2.5 mm L plate left

Titanium 2.5 mm L plate Right

Titanium 2.5 mm orbital plate 4 Hole with gap

Titanium 2.5 mm orbital plate 6 Hole with gap

Titanium chin plates 10 mm

Titanium chin plates 8 mm

Titanium emergency screw 1.7mmX4 mm

Titanium emergency screw 1.7mmX6 mm

Titanium emergency screw 1.7mmX8 mm

Titanium emergency screw 2.2 mmX10 mm

Titanium emergency screw 2.2 mmX4 mm

Titanium emergency screw 2.2 mmX6 mm

Titanium emergency screw 2.2 mmX8 mm

Titanium emergency screw 2.2 mmX10 mm

Titanium emergency screw 2.7 mmX6 mm

Titanium emergency screw 2.7 mmX8 mm

Titanium intermaxillary fixation screws 2 mm X 10 mm

Titanium intermaxillary fixation screws 2 mm X 8 mm

Ehrlisch arch bar

26 guaze wire

28 guaze wire

Intraoral distractor right with key

Intraoral distractor left with key

Tempromandibular Joint replacement device (TJR)

Drill bit 1.5 mm ( 4mm , 6mm , 8mm , 10mm , 12mm.

Drill bit 2 mm

Drill bit 2.5 mm

Bone shalvig round burs (5 mm dia.)

Bone slavig ecliped burs (8 mm dia.)

PEEK implants for facial reconstraion

S.S 1.5 mm 20 Hole continous

S.S1.5 mm 2 hole with gap

S.S 1.5 mm 3 hole with gap

S.S 1.5 mm 4 hole with gap

S.S 1.5 mm 6 hole with gap

S.S 1.5 mm 8 hole continuous

S.S 1.5 mm L Plate Left

S.S 1.5 mm L Plate Right

S.S 1.5 mm Orbital plate 4 hole with gap

S.S 1.5 mm Orbital plate 6 hole with gap

S.S 1.5 mm T Plate

S.S 1.5 mm X Plate

S.S 1.5 mm Y Plate

S.S 2 mm 16 hole continuous

S.S 2 mm 2 hole with gap

S.S 2 mm 3 hole with gap

S.S 2 mm 4 hole with gap

S.S 2 mm 4 hole continuous

S.S 2 mm 6 hole with gap

S.S Leg screw 2.5 mm X10 mm

S.S Leg screw 2.5 mm X12 mm

S.S. mesh 2”x2”

S.S mesh 4”x4”

S.Smesh 6”x2”

S.S mesh 8”x2”

S.S Rconstruction plate with condyle left long ramus (24 hole )

S.S Rconstruction plate with condyle left short ramus (20 hole )

S.S Rconstruction plate with condyle right long ramus (24 hole )

S.S Rconstruction plate with condyle right short ramus (20 hole )

S.S Rconstruction plate without condyle left long ramus(24 hole )

S.S Rconstruction plate without condyle left short ramus(20hole

S.S Rconstruction plate without condyle right long ramus(24hole

S.S Rconstruction plate without condyle right short ramus (20hole

S.S Screw 1.5 mm x 10mm

S.S Screw 1.5 mm x 12mm

S.S Screw 1.5 mm x 4mm

S.S Screw 1.5 mm x 6mm

S.S Screw 1.5 mm x 8mm

S.S Screw 2 mm x 10mm

S.S Screw 2 mm x 12mm

S.S Screw 2 mm x 14mm

S.S Screw 2 mm x 4mm

S.S Screw 2mm x 6mm

S.S Screw 2 mm x 8mm

S.S Screw 2.5 mm x 10mm

S.S Screw 2.5 mm x 12mm

S.S Screw 2.5 mm x 14mm

S.S Screw 2.5 mm x 4mm

S.S Screw 2.5 mm x 6mm

S.S Screw 2.5 mm x 8mm

S.S 2 mm orbital plate 6 hole with gap

S.S 2mm T plate

S.S 2mm x plate

S.S 2mm Y plate

S.S 2.5 mm 16 hole continues

S.S 2.5 mm 2 hole with gap

S.S 2.5 mm 3 hole with gap

S.S 2.5 mm 4 hole with gap

S.S 2.5 mm 6 hole with gap

S.S 2.5 mm 8 hole with gap

S.S 2.5 mm L plate left

S.S 2.5 mm L plate Right

S.S 2.5 mm orbital plate 4 Hole with gap

S.S 2.5 mm orbital plate 6 Hole with gap

S.S chin plates 10 mm

S.S chin plates 8 mm

S.S emergency screw 1.7mmX4 mm

S.S emergency screw 1.7mmX6 mm

S.S emergency screw 1.7mmX8 mm

S.S emergency screw 2.2 mmX10 mm

S.S emergency screw 2.2 mmX4 mm

S.S emergency screw 2.2 mmX6 mm

S.S emergency screw 2.2 mmX8 mm

S.S emergency screw 2.2 mmX10 mm

S.S emergency screw 2.7 mmX6 mm

S.S emergency screw 2.7 mmX8 mm

S.S intermaxillary fixation screws 2 mm X 10 mm

S.S intermaxillary fixation screws 2 mm X 8 mm

PEEK implants for facial reconstraion

Occipital Plate 25mm-55mm

Laminar/Pedical Screws of all size

Compatable road and Conectot

Fuser Cages all sizes

Stand alon/mesh Cages diameter 8 mm above

Expandable Cages cervical Diameter 8 mm and above

Anterior Cervical Plates & screw for all Level including anterior C1C2

Peak cahes with and without screw system for fixation

Hydroxy apetite bone graft 6 mm, 7mm

PLIF and TLIF cages all size

Stand alon/mesh Cages for Lumber and Dorsal Spine Diameter 8 mm above and above all sizes

Expandable Cages for Lumber and Dorsal Spine

Reductive screws for Lumbar and Dorsal Spine all size

Transpedical monoaxial screws dorso lumbar spine with compatible roads and connectors all sizes

Transpedical polyaxial screws dorso lumbar spine with compatible roads and connectors all sizes