Development and Improvement works as per Master Plan of Arulmigu Dhandayuthapani Swamy Temple, Palani

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls, Dismantling brick / stone masonry in cement mortar under 3m high FOR PLAIN

For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Dismantling RCC by manual / by using deploying machineries FOR PLAIN

For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Removal of Cut Stone Slabs / RCC Cover Slabs For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Terracing work in roof or floor For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for any thickness of pressed tiles and weathering course For Plain

For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for any thickness Wrought & putup framed timbers in roofs / floors For Hill temple 152m

Dismantling, clearing away and carefully stacking materials useful for any thickness of For Plain Cement concrete For Plain

For Hill temple 152m

Dismantling,clearing away and carefully stacking materials useful for any thickness of walls Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs For plain

Dismantling,clearing away and carefully stacking materials useful for any thickness of walls windows and doors including Frames hinges and fastenings For plain

For Hill temple 152m

Dismantling,clearing away and carefully stacking materials useful for any thickness of walls useful for any thickness of AC sheet roofing without roof timbers For plain

For Hill temple 152m

Dismantling,clearing away and carefully stacking materials useful for any thickness of walls corrugated Iron sheet roofing with span tiles over, without roof timbers For Hill temple 152m

Collecting the scattered debris from the campus and conveying away the same to out side by lorry to a lead of 3km (entirely with in the city limit)including loading and un loading charges and dumping in low places and levelling neatly etc.,. For plain & For Hill temple 152m

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. 0-2m ( For Plain)

0-2m ( Hill temple 152m )

2-3 m ( For plain)

2-3m ( Hill temple 152m)

3-4m ( For plain)

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental For Plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers For Plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification. For Plain

For Hill temple 152m

For Idumban Hill 104 m

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) GRADE BEAM For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. For Plain

For Hill temple 152m & For Idumban Hill 104 m

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. For Plain

For Hill temple 152m & For Idumban Hill 104 m

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. For Plain

For Hill temple 152m & For Idumban Hill 104 m

Centering for curved surface of all RCC item of work For Plain

For Hill temple 152m & For Idumban Hill 104 m

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers. For Plain

For Hill temple 152m & For Idumban Hill 104 m 3.29 m to 4 m

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basement For Plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Ground floor For plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

First floor For plain

For Hill temple 152m

For Idumban Hill 104 m

SECOND FLOOR For plain

For Hill temple 152m

THIRD FLOOR For Hill temple 152m

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) For plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Brick work in Cement Mortar 1:5 (One Cement and five M-sand) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifiction. In Foundation and Basement For plain

For Hill temple 152m

For Idumban Hill 104 m

Brick work in Cement Mortar 1:6 (One Cement and six M-sand) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifictionIn Ground floor For plain

For Hill temple 152m

For Idumban Hill 104 m

In First floor For plain

For Hill temple 152m

For Idumban Hill 104 m

In Second floor For Plain

For Hill temple 152m

In Third floor For Hill temple 152m

Brick partition walls of 11.50cm thickness using best quality II class table moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) Ground floor For Plain

For Idumban Hill 104 m

First floor For Plain

For Hill temple 152m

Second floor For Plain

For Hill temple 152m

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. (For Sump & Septic tank) For Plain

For Idumban Hill 104 m

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. For Plain

For Hill temple 152m

For Idumban Hill 104 m

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers For Plain

For Hill temple 152m

For Idumban Hill 104 m

Supplying and fixing of window grill using outer alround frame with 25x25x6mm L angle and vertical, horizontal 12mm square rod including one coat of red oxide primer, including all cost of materials and conveyance, labour charges, cutting and welding etc., complete complying with standard specification and as directed by the departmental officers. For Plain

For Hill temple 152m & For Idumban Hill 104 m

Ornamental Brickwork in Lime mortar 1:2 ( one lime two M sand) using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi , all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram, Upto 50'0" height For Plain

For Hill temple 152m

Upto 25'0" height For Plain

For Idumban Hill 104 m

For Idumban Hill 73 m

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime mortar 1:1.5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortor1:1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. Upto 50'0" height For Plain

For Hill temple 152m

Upto 25'0" height For Plain

For Idumban Hill 104 m

For Idumban Hill 73 m

Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanised iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Lime martor.1:1.5 finishing the same with Lime martor.1:1.5, bringing go the correct shape (Lakshana in conformity with silpa sastra inclusive of special ornaments, weapons, peedam etc., Complete and providing Lime martor.1:1.5 Nayam theervai wherever necessary, inclusive of cost and conveyance of all materials, such as cement broken bricks, sand G.I rods,binding wire, all labour for working in height, curing lifting of materials etc., complete, including cement painting 2 coats iver a primary coat (one vigraham is accountable with one head, 4 hands with weapons , ornamental costumes etc, as per prathima Lakshana, vigraham height is measurable from the crown top to the bottom of foot only. If peetam is provided the rate with peetam may be adopted as detailed thereunder). Sudhai size above 1'-0" to 2'-6" For Plain

For Hill temple 152m

For Idumban Hill 104 m

Painting with multicolour (Panchavarnam) good water based exterior Emultion paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.- Upto 50'0" height For Plain

For Hill temple 152m & For Idumban Hill 104 m

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. Upto 50'0" height For Plain

For Hill temple 152m

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 100mm thick slab For Plain

Supplying and laying of Rubber moulded Hydraulic pressed Paver blocks of 83 mm thickness using rubber mould, approved make with grey colour including cost of conveyance of interlocking blocks and filling sand and spreading of sand to a thickness of 15 cm for cussion below the interlocking blocks and consolidating, vibrating labour charges for laying to proper level slope etc. as directed by the dept. officers (Design and colour of interlocking blocks should be got approved by EE before using) For Plain

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including wall putty, wherever required For Plain

For Hill temple 152m

For Idumban Hill 104 m

Painting two coats of newly plastered wall surface with ready mixed Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever require. For Plain

For Hill temple 152m

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) For Plain

For Hill temple 152m

For Idumban Hill 104 m

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed by the departmental officers. For Plain

Supplying and fixing of Temple Pattern Ornamental Doors with high quality teakwood (country) with 2” minimum to 7” maximum thick Ornamental Frames, 2” thick to 5” thick Kamala (Flower Planks), Creeper, Birds, Animal Figures, Sculptures, etc. Backside 1” thick to 3” plank including necessary carving, shaping, wastage, etc., as per approved plan and design For Plain

Supplying and fixing Solid core flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers. For Plain

Providing Melamine polish for wooden door including cost of materials, labour charges and scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. For Plain

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) For Plain

Providing and fixing of UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside For Plain & For Hill temple 152m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work For Plain & For Hill temple 152m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work For Plain & For Hill temple 152m

Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame corners of extruded outer size 75mm X 50mm the inner core more rigid WPC composite with minimum shore hardness of 55 and bulk density 0.8 Grams per cubic centimeters. The frame shall be fixed to the wall using 10 X 100 mm long MS screw through the frame through the pvc fastener. Minimum three numbers of screw to be provided for each vertical member. The overall size of frame shall be with suitable rebate for housing shutter and shutter consist of 25mm polymer composite board single core exhaust with one side embo printing design. To avoid duplicate from the printing design shall have logo of the WPC board shall be bount aid proved by kept official. The shutter shall be provided with 3 Nos of 4” SS butt hinges, 2 Nos of 4” Stainless Steel handles, 3 Nos of 6” Stainless Steel tower bolts with required Stainless Steel screws including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officers For Plain,For Hill temple 152m & For Idumban Hill 104 m

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. For Plain

For Hill temple 152m & For Idumban Hill 104 m

Structural Glazing:Providing and fixing structural glazing fabricated from rollformed sections made of galvanized steel colour coated(Base steel as per IS 513 of ‘D’ quality, galvanized as per IS277 with Zinc of 120 grams / sqm.) with total coatedthickness of 0.72mm. The glass holding section made of 304grade SS of 0.6mm thick. Galvanized steel sections are to beused as stiffeners inside the colour coated steel / powdercoated sections as per the design requirement. Designcalculations are made to suit wind pressures as given in IS875. Paint specifications: Primer coat with epoxy primer of 5-7microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7microns or powder coated with pure polyester powder upto50-60 microns thick.Dimensions: The section should be of 37 x 53mm for framevertical, 37 x 53mm for frame horizontal section and sectionfor reinforcement should be of 31 x 55mm. glass holdingsection should be of 37 x 37mm for top and bottom grids inbetween should be of 37 x 18mm. For Hill temple 152m

Supply & Fixing of FRP of approved design of temple architectural elements with complete complying with standard specification and as directed by the departmental officers.. For Hill temple 152m

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area) For plain

Supplying and laying of Joint free Rectified Glazed Ceramic Flooring Tiles 305 x 305 x 8mm (Anti Skid) thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building) For plain

For Hill temple 152m

For Idumban Hill 104 m

Supplying and fixing in position of Double Charged Vitrified Floor tiles (800x800mm) of any size of approved special quality of 10 mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building) For plain

For Hill temple 152m

Providing cutstone flooring machine cutting edges 600X600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and Pointing With Lime mortor 1:1.5 etc complete., For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification. For plain

For Hill temple 152m

Providing Double Nosing of fine polished Granite stone slab including cos of material labour charge and all conveyance charges etc,.Complete complying with standard specification as directed by the departmental officers For plain

Supply and fixing of polished jet Black granite wall cladding slab of 10mm to 12 mm thick of best approved quality laid in C.M. 1:2(one of cement and two of sand) 12mm thick over the wall in all the floors including cutting the granite slab to the required size wherever necessary fixing in position finishing edges neatly including the cost of granite slab nosing , polishing laying etc., complete in all respect as directed by the departmental officer. For plain

For Hill temple 152m

For Idumban Hill 104 m

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) For plain

For Idumban Hill 104 m

Supplying and fixing in position of Dadooing Wall Tiles of size 300mm x 450mm x 8mm laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing/ dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note: (The colour make and quality shall be approved from the E.E before use) Note: (only one particulars size of ceramic wall tiles to be used for one building) For plain

For Hill temple 152m

For Idumban Hill 104 m

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. For plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. For plain

For Hill temple 152m

For Idumban Hill 104 m

For Idumban Hill 73 m

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete complying with relevant standard specification and as directed by the departmental officers For Plain,For Hill temple 152m & For Idumban Hill 104 m

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete For Plain,For Hill temple 152m & For Idumban Hill 104 m

Manufacturing, Supplying and Fixing of Stainless Steel Grating as directed and designed by the departmental officers. The rate is inclusive of cost all materials, labour charges and scaffolding charges etc., complete complying with standard specification as directed by the departmental officers. For Plain

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. For Plain

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. For Plain,For Hill temple 152m & For Idumban Hill 104 m

WATER SUPPLY ARRANGEMENTS Supplying and fixing in position best approved of BIS quality 110 mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.rs. For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including fixing UPVC specials using UPVC adhesives (including cost of specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. 50 mm Dia UPVC Pipe For Plain

40mm Dia UPVC Pipe For Plain

For Hill temple 152m

32 mm Dia UPVC Pipe For iduman hill

25 mm Dia UPVC Pipe For Plain

For Hill temple 152m & For Idumban Hill 104 m

20 mm Dia UPVC Pipe For Plain

For Hill temple 152m

Supplying and fixing of GM Gate valve 50mm Dia heavy duty labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). 50 mm Dia For Plain

For Hill temple 152m

20 mm Dia For Plain

25 mm Dia For Plain

Supplying and fixing in position 15mm dia brass CP screw down tap(heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works). CP Down tap For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). For Plain

For Hill temple 152m

For Idumban Hill 104 m

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works) For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). For Plain

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 10 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing best approved best quality CP Health Facet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. For Plain

For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level 160 mm dia For Plain

110 mm dia For Plain

For Hill temple 152m & For Idumban Hill 104 m

75 mm dia For Plain

For Hill temple 152m & For Idumban Hill 104 m

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. IC chamber for 110mm (900x900x600)mm For Plain

For Hill temple 152m & For Idumban Hill 104 m

IC chamber for 110mm (600x600x600)mm For Plain

For Hill temple 152m & For Idumban Hill 104 m

IC chamber for 110mm (450x450x600)mm For Plain

For Hill temple 152m

For Idumban Hill 104 m

Supplying and fixing in position best quality 160mm HDPE soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using HDPE adhesives including fixing to the wall with special HDPE / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The HDPE pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level (110mm dia) For Hill temple 152m & For Idumban Hill 104 m

Supply and fixing of 2000 litres capacity Priming Tank made up of Best Quality PVC including cost of materilas,labour charges and all conveyance charges etc.,complete complying with standard specification as directed by the departmental officers. For Plain

Supplying & fixing PVC mould CI Steps for Sump etc all complete in all respects complying with relevant standard specification and as directed by the departmental officers. For plain,For Hill temple 152m & For Idumban Hill 104 m

Supplying and fixing in position SFRC manhole covers with SFRC frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications For Plain

For Hill temple 152m & For Idumban Hill 104 m

Providing and laying Granular Sub base for 200mm consolidated thickness with .96 cubic metre of 53mm to 22.4mm graded metal , .38 cubic metre of gravel and .58 cubic metre of quarry dust to cover 10 square metre area and to give CBR of 30 on prepared sub grade including cost and conveyance of all material nat site of work, labour charges for spreading, watering and consolidation by power roller of 8 to 10 ton capacity, Hire and fule charges for tool and plants such as motor grader 110 HP, vibratory roller 8 to 10 ton capacity, water tanker 6 KL capacity etc., all complete in all respects complying with relevent standard specification and drawing as directed by department For Plain

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers For Plain

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) For Plain

For Hill temple 152m

Supplying and fixing GI DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanised iron pipes and flats and fixing them in position, etc., complete as per cl 2705 of MORT&H specificaton For Plain

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers For Hill temple 152m & For Idumban Hill 104 m

Construction of cast -in- situ Silt Catch Pit With Rain Water Harvesting Structure of inner size 600 X 600 x 600 mm including necessary earth work excavation including providing foundation in PCC 1:5:10 under walls 150mm thick and cutting the existing storm water drain of size 300 x 150mm for fixing 2 Nos of 160mm dia PVC pipe on the storm water drain mouth, with RCC cast in situ wall of size 120mm in RCC 1:1.5:3 with steel of 10.60 kg including fixing Ductile Iron grating hinged with frame Clear opening of size 600 x 600mm of class C-250 (Heavy Duty 25MT) - completing the finishing work etc., cost per each number. Using Hand Bore Set drilling of bore hole of 300mm dia upto 4.35m depth including shifting of the hand bore from one place to another place within 5 km and filling in with 40mm HBG metal with 200mmdia pvc pipe 6kg/cm2 For Plain

SIGNAGE ARRANGEMENTS Supply and fixing of SIGN BOARD with HANDING ACP Elevation + Box fabrication + 3D LED sign board with gold aluminium trim cap + ipc168water and samsung LED 3 layer rain proof {Fixing Noch letter on the ACP sheet box and connecting to power supply} this included with hanging and transport charges etc.,

Supply and fixing of Route map display board with photo frame LED back light {Connecting to power supply} this included with hanging and transport charges etc.,,

Supply and fixing of Reflector sign board on ACP sheet + MS work with transport charges etc.,

Supply and fixing of Reflector sign board on ACP sheet + MS work with transport charges etc.,

Fabrication for display board support with civil work + Digging ground + MS work etc.,

Fabrication for display board support with civil work + Digging ground + MS work etc.,

ELECTRICAL ARRANGEMENTS WIRING Wiring with 2x1.5sqmm (22/0.3) PVC insulated unshNothed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concNoled portion with suitable colour for PVC concNoled light point / fan point (For electronic regulator) (5point per coil)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unshNothed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concNoled portion with suitable colour for PVC concNoled light point / fan point (6point per coil) (For rooms like bath, toilet & pump room etc.)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unshNothed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous North wire connection of 14 SWG TC wire and making good of the concNoled portion with suitable colour for concNoled PVC plug point.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unshNothed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessoires with Module GI switch box inflush with wall with 6A one way module switch with module front plate and making good of the concNoled portion with suitable colour for PVC concNoled light point / fan point (For electronic regulator) (4point per coil)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unshNothed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessoires with Module GI switch box inflush with wall with 6A one way module switch with module front plate and making good of the concNoled portion with suitable colour for PVC concNoled light point / fan point (For electronic regulator) (6point per coil)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unshNothed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concNoled in wall and ceiling with PVC accessories with Module GI switch box inflush with wall with 1no 6A one way module switch with 1no 6A 3/2 pin module socket with module front plate with continuous North wire connection of 14 SWG TC wire and making good of the concNoled portion with suitable colour for concNoled PVC pipe plug point.

LIGHT FIXTURES Supply and fixing of single box type 4'20W LED fitting with prewired LED tube with TW round blocks on wall or ceiling with PVC unshNoted copper lNods from the terminals to the fitting

Supply and fixing of WT bulk hNod fitting with guard suitable for LED lamp with 9W LED bulb

Supply and fixing of 10W LED Indoor Mirror light fitting with necessary connection.

Supply and fixing of LED bulb for BH point. (For Night Lamp)

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25mm dia GI pipe (Class 'B') with 1No 25mm GI bend completion the existing post /wall with PVC unshNoted copper lNods MS clamps with painting

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia GI pipe (Class 'B') with 1No 32mm GI bend completion the existing post /wall with PVC unshNoted copper lNods MS clamps with painting

Supply and fixing of 60W LED street light fitting with LED (Higher end) with 32mm dia GI pipe (Class 'B') with 1No 32mm GI bend completion the existing post /wall with PVC unshNoted copper lNods MS clamps with painting

Supply and fixing of 80W LED focus light fitting with angle iron frame work (special clamp) on the existing post /wall with PVC unshNoted copper lNods with painting.

Supply and fixing of 30W LED flood light fitting with angle iron frame work on the existing post /wall with PVC unshNoted copper lNods with painting.

Supply and fixing of 50W LED surface movable spot/ flood light fitting (Higher end) with PVC unshNoted copper lNods with painting.

FANS Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod with fan clamp.

Supply and fixing of 300mm (12") sweep (Light duty) AC exhaust fan complete with necessary wall opening and making of the wall.

Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC exhaust fan

Supply and fixing of 450mm (18") sweep wall mounting fan with necessary connections.

EXTERNAL LIGHTS Supply and fixing of 65mm (21/2") GI pipe (Class 'B') of 6mt Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with SMC box to 6A control SPMCB etc with suitable angle iron frame work with door and with lock and key arrangements to house 6A SP MCB switch, 2/4way connector on suitable hylem sheet with supply and fixing of 48W LED street light fitting with LED (Higher end) with 1metre of 32mm dia GI pipe (Class 'B') complete with suitable MS clamps on the above post with PVC unshNothed lNods with painting of suitable colour.

Supply and fixing of 65mm (21/2") GI pipe (Class 'B') of 6mt Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with SMC box to 6A control SPMCB etc with suitable angle iron frame work with door and with lock and key arrangements to house 6A SP MCB switch, 2/4way connector on suitable hylem sheet with supply and fixing of 2x120W LED flood light fitting with Integrated driver (Higher end) complete with suitable MS clamps on the above post with PVC unshNothed lNods with painting of suitable colour.

Supply and fixing of Pillar box made of 16 SWG sheet steel with door arrangments including painting to house 4 way Vertical TPN MCB DB with 1 no. 63A 4P MCB as incoming , 3 nos. 32A 3P MCB and 3 nos. 6A to 32A SP MCB as outgoing with bus chamber of 100A capacity for termination of alu UG cable with interconnections and North connection

Supply and fixing of SMC box with lock and key arrangements for street light junction box with 4 way Hevy duty connector

Supply and fixing of SMC box for street light control to house 1 no.4 way connector (HNovy duty ) on hylem sheet on wall with necessary connections.

Supply & fixing of AC/DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Box with push switch.

SPLIT AIR CONDITIONER Supply and Installation of1.5 TR Capacity 5 Star Value. Blue Coated Evaporated Coil, With Aqua ClNor protection outdoor unit With temperature Display on the Indoor Unit. Non-Inverter Hi-Wall mounting energy efficient Split type AC unit consisting of outdoor condensing unit complete with cmpressor and air cooled condenser with fan motor & Fully remote control operation etc., including initial charge of gas and suitable for single phase AC, (230V, 50HZ, AC) (Higher end ) (5 Star Rated)

supply and fixing of 4KVA double boost wall mounting type Automatic voltage stabilizer with time delay, low & high cut off arrangements suitable for operation on 230V/50C/S, AC supply.

Supply and fixing of MS stand for fixing outdoor unit.

Supply and run of water drain pipe line (1" PVC pipe).

PLUGS Supply and fixing of 3Nos. 5A (3pin and 2pin) combined flush type wall socket with control switches concNoled in suitable TW box coverd with hylum sheet in flush wall with North connection (for computer plug socket)

Supply and fixing of 5A/15A 3pin combined flush tybe wall socket with 15A flush tybe switch concNoled in suitable MS box in flush with wall and coverd with 3mm thick hylem sheet.

Supply and fixing of 2Nos 6A two module 5pin socket, 2nos 6A one module switch with module cover plate (plastic) on suitable concNoled box (GI) inflush with wall with connection.

Supply and fixing of 3Nos 6A two module 5pin socket, 3nos 6A one module switch with module cover plate (plastic) on suitable concNoled box (GI) inflush with wall with connection (for computer plug socket)

Supply and fixing of 1No 6/16A two module socket, 1No 16A one module switch with module cover plate (plastic) on suitable concNoled box (GI) inflush with wall with connection

Supply and fixing of 1no 16A one module switch, 1no 6A one module Bell push switch and 1no 16A one module switch with indicator for Master control switch concNoled in existing TW box in flush with wall and covered with 3mm thick hylem sheet.

Supply and fixing of 1No 16A one module switch with indicator with module cover plate (plastic) on suitable concNoled box (GI) inflush with wall with connection

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with North connection (For AC Plug)

RUN OF MAINS Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unshNoted Cu.condutor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with making good of the concNoled portion with suitable colour.

Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unshNoted Cu.condutor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with continious North wire connection of 2.5sq.mm PVC insulated SC unshNoted Cu.copper wire and making good of the concNoled portion with suitable colour.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unshNoted Cu.condutor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with continious North wire connection of 2.5sq.mm PVC insulated SC unshNoted Cu.copper wire and making good of the concNoled portion with suitable colour.

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unshNothed copper conductor of 1100 V grade in suitable PVC rigid pipe concNoled in wall and ceiling with continuous North wire connection by 2.5 sq.mm. PVC insulated SC unshNothed copper wire with painting of suitable colour.

Supply and run of 4 of 10 sqmm (140/0.3) PVC insulated SC unshNoted Cu.condutor of 1100V grade in suitable PVC rigid pipe concNoled in wall and ceiling with continious North wire connection of 2.5sq.mm PVC insulated SC unshNoted Cu.copper wire and making good of the concNoled portion with suitable colour.

Supply and Run of 8 core 2.5 sq.mm. (36/0.3) PVC insulated SC unshNothed copper conductor of 1100 V grade in suitable PVC rigid pipe ConcNoled in wall and ceiling with continuous North wire connection by 2.5 sq.mm. PVC insulated SC unshNothed copper wire and making good of the concNoled portion with suitable colour.

MCB WITH ENCLOSURE Supply and fixing of 32A DP MCB switch in sheet steel enclosure with necessary electrical connection.

Supply and fixing of 32A FP MCB switch in sheet steel enclosure with necessary electrical connection.

Supply and fixing of 63A FP MCB switch in sheet steel enclosure with necessary electrical connection.

DB'S Supply and fixing of 8way Single pole and Neutral MCB Distribution Board with double door (metal) with 1No 32A DP MCB Switch as incoming and 6Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of 12way Single Pole and Neutral MCB Distribution Board with double door (metal) with 1 No 40A DP pole MCB as incoming and 10 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of 12way Single pole and Neutral MCB Distribution Board with double door (metal) with 1No 32A DP MCB switch as incoming and 10Nos 6A to 32A SP MCB as outgoing in flush with wall with North connection only.Higher end

Supply and fixing of Vertical type 4way Triple Pole and Neutral MCB Distribution Board with double door (metal) with 1 No 63A Four pole MCB switch as incoming and 12 Nos 6A to 32A SP MCB as outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A FP MCB switch as incoming and 1 no. 63A TP MCB, 9 nos 6A to 32A SP MCB as outgoing in flush with wall with North connection only. Higher End

Supply and fixing of Vertical type 6 way Triple pole and Neutral MCCB Distribution Board in sheet steel enclosure of double door type with metal door with 1 No. 100A Four pole MCCB as incoming 18Nos 6A to 32A MCB switch as outgoing outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of Vertical type 6 way Triple pole and Neutral MCCB Distribution Board in sheet steel enclosure of double door type with metal door with 1 No. 100A Four pole MCCB as incoming 3Nos 63A TP MCB and 12Nos 6A to 32A MCB switch as outgoing outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of Vertical type 6 way Triple pole and Neutral MCCB Distribution Board in sheet steel enclosure of double door type with metal door with 1 No. 125A Four pole MCCB as incoming 4Nos 63A TP MCB and 6Nos 6A to 32A MCB switch as outgoing outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of Vertical type 8way Triple Pole and Neutral MCB Distribution Board with double door (metal) with 1 No 63A Four pole MCB Isolator as incoming and 2 Nos 6A to 32A TP MCB and 18Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concNoled portion with North connection only.Higher end

Supply and fixing of 8way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1No 63A FP MCB Switch as incoming and 3Nos 6A to 32A TP MCB, 15Nos 6A to 32A SP MCB as outgoing on wall with North connection only. Higher end

UG CABLES Supply and laying of 31/2 of 25sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the North to make good.

Supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with North connection

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 31/2 of 35sqmm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the North to make good.

Supply and clamping of 31/2 of 35sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 1/2 x 35sq.mm armoured LTUG cable with North connection.

Supply and providing end termination of 31/2 x 35sq.mm PVC LTUG armoured cable with necessary Alu. Cable sockets by crimping etc., with electrical connection complete.

Supply and laying of 31/2 of 50sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the North to make good.

Supply and clamping of 31/2 of 50sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 1/2 x 50sq.mm armoured LTUG cable with North connection.

Supply and providing end termination of 31/2 x 50sq.mm PVC LTUG armoured cable with necessary Alu. Cable sockets by crimping etc., with electrical connection complete.

Supply and laying of 3 1/2 x 70 sq.mm PVC armoured LTUG alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the North to make good

Supply and clamping of 31/2 of 70sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 1/2 x 70sq.mm armoured LTUG cable with North connection.

Supply and providing end termination of 31/2 x 70sq.mm PVC LTUG armoured cable with necessary Alu. Cable sockets by crimping etc., with electrical connection complete.

Supply and laying of 3 1/2 x 120 sq.mm PVC armoured LTUG alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the North to make good

Supply and clamping of 31/2 of 120sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3 1/2 x 120sq.mm armoured LTUG cable with North connection.

Supply and providing end termination of 31/2 x 120sq.mm PVC LTUG armoured cable with necessary Alu. Cable sockets by crimping etc., with electrical connection complete.

Supply and laying of 2 runs of 3 1/2 x 185 sq.mm PVC armoured LTUG alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the North to make good

Supply and clarnping of 2 runs of 3 1/2 x 185 sq.mm. PVC LTUG alu.armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with North connection

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 1/2 x 240 sq.mm PVC armoured LTUG alu. cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the North to make good

Supply and clamping of 31/2 of 240sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and clamping of 31/2 of 240sqmm PVC LTUG armoured cable with 65mm dia GI pipe on post or on wall with MS clamps.(with 65mm dia GI Pipe)

Supply and fixing of brass cable gland for 3 1/2 x 240sq.mm armoured LTUG cable with North connection.

Supply and providing end termination of 31/2 x 240sq.mm PVC LTUG armoured cable with necessary Alu. Cable sockets by crimping etc., with electrical connection complete.

Supply and laying of 2 of 10sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the North to make good.

Supply and clamping of 2 of 10sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 2 x 10sq.mm armoured LTUG cable with North connection.

Supply and laying of 4 of 10sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the North to make good.

Supply and laying of 4 of 10sqmm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the North to make good.

Supply and clamping of 4 of 10sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 4 x 10sq.mm armoured LTUG cable with North connection.

Supply and laying of 4 of 16sqmm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the North to make good.

Supply and clamping of 4 of 16sqmm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 4 x 16sq.mm armoured LTUG cable with North connection.

EARTHING Earthing as per P.W.D standard with an North electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Earthing as per the ISI specification with an North electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper North plate of size 125mm x 50mm x 6mm, with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 1 of No.8 SWG copper wire for North connection.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for North connection

PANEL BOARDS Supply , Erection Testing and commissioning of 415V/50HZ 250A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rNor side of the panel board for North buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 250A TPN switch with HRC fuse -1 no. Outgoing125A TPN switch with HRCfuse units -2 nos. 63A TPN switch with HRCfuse units -3 nos.

Supply , Erection Testing and commissioning of 415V/50HZ 250A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rNor side of the panel board for North buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 250A TPN switch with HRC fuse -1 no. Outgoing125A TPN switch with HRCfuse units -5 nos

Supply , Erection Testing and commissioning of 415V/50 HZ 400A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rNor side of the panel board for North buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 400A TPN switch with HRC fuse -1 no. Outgoing 250A TPN Switch with HRC fuse units -2 nos..125A TPN switch with HRCfuse units -2 nos.

Supply , Erection Testing and commissioning of 415V/50 HZ 400A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rNor side of the panel board for North buses and Digital L&T make 3 phase 50/5A 3 phase energy meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. Incoming 400A TPN switch with HRC fuse -1 no. Outgoing 250A TPN Switch with HRC fuse units -3 nos..125A TPN switch with HRCfuse units -5 nos.

Supply and fixing of 400A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with North connection only

Supply and fixing of 400A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brNok on suitable angle iron frame work with MS cable entry boxes with North connection only

Supply ,Erection ,Testing and commissioning of Three compartment LTCT meter box made up of 16 SWG CRCA sheet steel ( Length 1200mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor / wall mounting support with supply and fixing of the following interior mounting arrangements with busbar chamber, meter chamber and Terminal box chamber confirming to IE rules. i.The busbar chamber will consist of 4 nos. 2” x 1/4” tinned copper flat for phase and neutral busbar on epoxy mounted bus insulated at proper and sufficient spacing between the bus bar as per IE Rules. ii. 3 nos. 200/5A CT coil mounted in Three phase busbar. iii. Interconnection between CT coil to 4 way terminal box and 4 way terminal box to Meter box by 4 sq.mm PVC cu.wire. The LTCT meter box should be powder coat paint of approval colour , approved by site officer 1. Dry type Air clNoner, .

GENERATORS Supply, Erection, Testing, Commissioning and Handing over of 1No 160 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below with AMF panel.1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000.The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ GrNoves/Equivalent) 1. Dry type Air clNoner, 2. Expansion bellow , 3. Radiator, Radiator fan and mounting,4. Air to air charge cooler,5. Exhaust Gas turbo charger,6. Lube oil cooler and Lube oil filter,7. Fuel filterpre and micro,8. In-line Mono-block fuel injection pump with governor and fuel feed pump,9. Electronic governor,10. 24V Battery charging alternator,11. 24V Volt electric starter motor,12. Engine test Certificate,13. Residential Mufler,14. Fly wheel with starter ring.ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator.SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure,2. High Water temperature,3. Vee-belt failure and over speed ,4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load,2. ALTERNATOR : Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ GrNoves/ Equivlent.)3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface trNotment – Painting: The enclosure surface shall be suitably trNoted for degrNosing de-rusting and posphating. The canopies are passed through seven – tankcanopies are passed through seven – tank trNotment thoroughly. Additional fNotures of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to incrNose its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at clNoner within the enclosure well within 5-7 deg centigrade,4. FUEL TANK : 350 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be Nosily removed for clNoring or any maintenance,5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges,Supply and fixing of Exhaust pipe for extension of extension of existing pipe,Providing Bed concreting arrangments for the above Generator set ,Charges for filling up Diesel for first runnig and testing.

Supply and fixing of Exhaust pipe for extension of existing pipe

Providing Bed concreting arrangments for the above Generator set

Charges for filling up Diesel for first runnig and testing

Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below with AMF panel1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000.The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ GrNoves/Equivalent) 1. Dry type Air clNoner, 2. Expansion bellow , 3. Radiator, Radiator fan and mounting,4. Air to air charge cooler,5. Exhaust Gas turbo charger,6. Lube oil cooler and Lube oil filter,7. Fuel filterpre and micro,8. In-line Mono-block fuel injection pump with governor and fuel feed pump,9. Electronic governor,10. 24V Battery charging alternator,11. 24V Volt electric starter motor,12. Engine test Certificate,13. Residential Mufler,14. Fly wheel with starter ring.ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator.SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure,2. High Water temperature,3. Vee-belt failure and over speed ,4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load,2. ALTERNATOR : Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ GrNoves/ Equivlent.)3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface trNotment – Painting: The enclosure surface shall be suitably trNoted for degrNosing de-rusting and posphating. The canopies are passed through seven – tankcanopies are passed through seven – tank trNotment thoroughly. Additional fNotures of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to incrNose its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at clNoner within the enclosure well within 5-7 deg centigrade,4. FUEL TANK : 350 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be Nosily removed for clNoring or any maintenance,5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges,Supply and fixing of Exhaust pipe for extension of extension of existing pipe,Providing Bed concreting arrangments for the above Generator set ,Charges for filling up Diesel for first runnig and testing.

Supply and fixing of Exhaust pipe for extension of existing pipe

Providing Bed concreting arrangments for the above Generator set

Charges for filling up Diesel for first runnig and testing

SOLAR WATER HEATERS Supply, erection and commissioning of 200 Liters ETC Model Solar water hNoter with following specifications  Storage tank: GI 120GSM with zero spangle material  Insulation: PUF  Tank Outer cladding: Polyester grade powder coated stainless steel.  Interconnecting pipes: GI  Storage tank stand: GI with powder coated.  Welding tech stand: Co2.  No of Tubes: One tube for 10 litres.  Size of Tube: 58*1800MM.  Type of Tube: High borosilicate 3 target coating. The above solar heater should be erected on the terrace with suitable mount.

Supply, erection and commissioning of 500 Liters ETC Model Solar water hNoter with following specifications  Storage tank: GI 120GSM with zero spangle material  Insulation: PUF  Tank Outer cladding: Polyester grade powder coated stainless steel.  Interconnecting pipes: GI  Storage tank stand: GI with powder coated.  Welding tech stand: Co2.  No of Tubes: One tube for 10 litres.  Size of Tube: 58*1800MM.  Type of Tube: High borosilicate 3 target coating. The above solar hNoter should be erected on the terrace with suitable mount.

CCTV ARRANGMENTS Supply and fixing of 4 MP Starlight WDR IR Bullet Network Camera with Built-in IR LED, Max IR distance 30 m and IP67 Protection with CAT6 PVC module box and patch cord with necessary accessories. (Make: UNV/Hikvision/ Equivalent)

Supply and fixing of 32Channel Network Video Recorder without PoE switch as per specification. (Make: Hikvision/UNV/Equ)

Supply and fixing of 6TB SATA Hard Disk for NVR (Make: Western/Digital/Equ)

Supply of 24Port PoE Gigabit 10/100/1000Mbps switch with SFP slot as per specification (Make: Hikvision/UNV/Equivalent)

Supply and fixing of 12U Rack with all accessories.

Supply and run of Unarmoured CAT 6 Networking cable for connecting IP camera to PoE Switch in rigid PVC pipe concNoled in wall and ceiling and making good of the concNoled portion with suitable colour.

Supply and laying of Armoured CAT-6 cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the North to make good

Supply and clamping of Armoured CAT-6 cable on post or on wall with MS clamps.

Supply and fixing of 43" LED Monitor with VA panel / HDMIx2 / USBx2 / Screen mirroring / Dex enable/ Air play 1920p x 1080p full HD with HDR 10display, Bilt in spNoker, 5meter HDMI cable & wall mounting accessories. (Make: Sony/Samsung/Equivalent)

FIRE FIGHTING ARRANGEMENTS Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm –dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E” , bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary etc complete as per standard specification and as directed by the department officers. Best Quality For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 metres long so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve,including conveyance, all incidental charges, neccessary etc complete as per standard specification and as directed by the department officers. Best Quality For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, and fixing in position of Fire fighting application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply of Fire fighting application M.S. Hose Box so that to keep two number of Hose and one number of branch pipe with nozzle. It will have proper glass window type double door with universe open key, painted inside white and outside Post Office red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, chellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, erection, testing and commissioning of MS ‘C’ Class heavy pipe as per IS 1239, to with stand a developing pressure of 10 kg/Sq.cm including necessary fittings like MS flange of table ‘E’, Elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding. Including one coat metal primer and two coat post office red painting including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers 100 mm Dia For Plain

80 mm Dia For Plain

65 mm dia For Plain

50 mm dia For Plain

40 mm dia For Plain

25 mm dia For Plain

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent) For Hill temple 152m

Supply erection testing and commissioning of Electric Motor Driven Fire Pumpset suitable for automatic operation and consisting of following: a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 4550 LPM against a total head of 110 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 1 No. squirrel cage induction motor of 175 HP, 415 Volt, 3 phase 50Hz rating, conforming to IS:325-1978 with class "F" insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691, synchronous speed of 2900 RPM. c. Common bed plate fabricated with MS channel / cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 No. d. Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures, grouting, etc., in accordance with the manufacturer's design and as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard Specification and as directed by the Departmental Officers For Plain

Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers 150mm dia For Plain,For Hill temple 152m & For Idumban Hill 104 m

100mm dia For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects as required. a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 70 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc. d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc. For Plain,For Hill temple 152m & For Idumban Hill 104 m

Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories.The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of Cast iron body Sluice Valve 150mm dia at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts and as directed by the departmental officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of cast iron body and Gun metal or stainless steel internal Eachn return valve of 150mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E', gasket, bolts &nuts , etc. as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start & auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: DONFOSS/ INDFOSS/ ISI MAKE / EQUIVALENT. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, erection, testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply and fixing of stored pressure ABC(MoEach Ammonium Phospate) Powder Type Fire Extinguisher of 6kg. Capacity as per IS Each. 15683 with pressure gauge, discharge hose & control Eachzzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as per New IS Each. 15683 complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply,installation, testing and commissioning of Microprocessor based conventional 12 Zone Fire alarm control panel having the rating of 24 Vot DC power supply, consisting 230/24 volt SMPS unit, 2 Nos 12 Volt, 7 AH standby batteries,suitably mounted on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, installation, testing and commissioning of Manual Call Point (MCP), providing on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, installation, testing and commissioning of Electronic Hooter/ Sounder, providing on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply and laying of FRLS PVC insulated 2 core 1.5 sqmm Armoured Copper cable on ceiling / wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply, installation, testing and commissioning of 120 Watts, 100 Volt Audio out put Amplifier having 5 Mic input& 2 Aux input, working either in 220-240 Volt, 50/60 Hz single phase AC supply or in 12 Volt DC supply, suitably mounted on wall using Mounting bracket fabricated in MS angle,screws,wooden plug etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply and runs of 2 core 1.5 sqmm multi strand shielded Copper Cable for PA wiring between PA console and PA speaker provided in respective Zone existing 20/25mm dia PVC pipe as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Supply and laying of 25mm dia PVC conduit Pipe in wall or Ceiling using suitable size GI mounting bracket, anchor Fateners,nylon strap etc., as per standard methods and as directed by the department officers. For Plain,For Hill temple 152m & For Idumban Hill 104 m.

Sub Total

PSK ENGINEERING CONSTRUCTION AND CO

ABIRAMI ENGINEERING CONSTRUCTION AND CO