Repair/replacement of damaged/worn out door, windows, kitchen cupboards and other allied works in qtrs. at CSIR Colony Nirala Nagar and Tagore Marg, Lucknow.

Amount

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood.

Providing and fixing wire gauge shutters in door, windows, clerestory window in existing pattern and design using stainless steel grade 304 wire gauge with wire of dia 0.56 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutter using. Sal Wood.

Providing and fixing door window/clerestory window glazed shutter in existing pattern & design using 4mm thick frosted glass panes i/c ISI marked M.S. pressed butt hinges bright finished of reqd. size with necessary screws: Sal wood 35mm.

Providing & fixing looking glass mirror of superior glass of approved quality and of reqd. shape and size with plastic moulded frame of approved make and shape with 6mm thick hard board backing size 600x450mm.

Providing and fixing to existing door frames.30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats.The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Fixing chowkhats in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62x19 mm.

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm.

Supply, fabrication & fixing in position wooden cupboard shutter under kitchen platform of size 3.00 (L) x0.75m (D) x0.75m (Ht.) Approx. made out of Malaysia sal wood frame of section 65x40mm and shutter of commercial board 19mm century/Archid or eqvt. make fixed/screwed in proper position divided in five parts with vertical sal wood members and board of same size & one Horizontal shelf with same board of same size in one parts of cup-board. In central parts a provision of one drawer will also be made will same boards with runners etc. complete. The front shutter shall be provided with 1mm thick Marino/Century or eqvt. make mica pasted over board and hinged with parliamentary hinges of full ht. With teak wood lipping on edges of shutter complete including all fittings such as chapka magnet wooden knobs. The entire assembly shall be painted with syn. enamel paint over a coat of primer on exposed wooden surface in desired shade. The job will be completed to entire satisfaction of Engineer-In-charge (Front area will be measured for payment.)

Supply, fabrication and erection of wooden racks over kitchen platform of size 2.44m (L) x0.30m (d)x0.60(ht.) (approx) with 19mm thick commercial board Century/archid or eqvt. make. The rack will be divided in three equal parts vertically and two equal parts horizontally with same board the shutter will be hinged by means of parliamentary hinges complete with teak wood lipping i/c fittings such as aluminum chapka, wooden knob, clip in each shutter. The frontage shall be glued over board with 1mm thick mica Marino/Century make in approved shade. The entire paint of desired/matching shade over primer complete. The job will be completed to entire satisfaction of Engineer-In-Charge.(Front area will be measured for payment).

Supply, fabrication and installation of wall mounted wooden storage rack of size 1.75x2.00 mtr and 600 mm deep having four horizontal shelves and one vertical intermediate partition with side hung openable shutters with 19mm commercial board Century/Orchid or eqvt. make except back. The back will be commercial ply 12mm thick Century/Orchid or eqvt. make. The front of shutter shall be provided with 1mm thick laminate Marino/Century or eqvt. make and the inner surface will be painted with enamel paint of approved colour over one coat of wooden primer complete. The job includes locking arrangement, S.S. Hinges 75x12x19mm, S/S handle, teak wood lipping 19x6mm etc. complete. The job will be completed to entire satisfaction of Engineer In-Charge.

Note:-Rates should be quoted inclusive of all Taxes, GST @ 18% etc.

Pranav Kumar

Manju Shree Traders

M/S GRAFH ENGINEERS