Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹47.2 L+₹66,757.74 (1.44%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹47.7 L+₹1.1 L (2.47%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹48.0 L+₹1.5 L (3.25%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹48.2 L+₹1.7 L (3.71%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹91,900
Closing Date
28 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE 868 EWS PIN- 913 868 C/o 99 APO
PROVN OF TOILET BLOCK FOR DSC GUARD NEAR WATCH TOWER NO 21 AND ADDN ALTN TO BLDG NO T 4 MES IB IN THE AREA OF AGE BR I AT RMS
2024_MES_640564_1
8703/C/E8
Open Tender
Civil Works
Item Rate
120 days
RANGAPAHAR
Class D Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹91,900
12 Mar 2024
3 Feb 2024
1 Mar 2024
3 Feb 2024
28 Feb 2024
15 Feb 2024
3 Feb 2024 - 8 Feb 2024
Amount
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed .
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc including removal/disposal of debris and rubbish etc complete all as specified and as directed .
Dismantling, floor, hearth or wall tiling including cement mortar bedding complete etc complete all as specified and as directed .
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed .
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed .
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exc 4 sqm each with shutters (Without taking off shutters from the frames) etc complete all as specified and as directed .
M&L for brick work with sub class 'B' bricks (using old size burnt bricks)straight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6 etc complete all as specified and as directed .
M&L for Second class clean sawn hardwood in scantling fixed in timber framed work etc complete all as specified and as directed .
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed .
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,valley gutter etc fixed with self tapping screws etc complete all as specified and as directed .
S & F for 10 mm thick plaster of Paris (Gypsum anhydrous) ceiling reinforced with rabbit wire mess up to a height of 5m above floor level, to be fixed in GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally preparing plastered surfaces and applying two coats of oil bound distemper over 3mm wall care putty on ceiling on flat and raised moulding etc complete all as specified and as directed .
S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre etc complete all as specified and as directed .
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic etc complete all as specified and as directed .
S&F Plain, solid straight chowkat and frames, wrought, frmed rebated on the solid, rounded or chamfred put together with glue pinned at joints , supplied and fixed in 2nd class hard wood etc complete all as specified and as directed .
S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed .
Supply and fix 35 mm thick factory made second class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauze etc (with out sash bar ) edges of framing plain, camfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I section 8 clause 8.42(a) supplied and fitted to chowkat etc complete all as specified and as directed .
S&F Mortice lock,vertical type Brass 4 levers, size 100 mm etc complete all as specified and as directed .
S&F 250 mm long Brass door bolt with sand or die-cast brass hasp, staple hasp, staple (bolt type) and fixing bolts with rolled or drawn Brass bolt and fixed etc complete all as specified and as directed .
M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and as directed .
Supply and fix stainless steel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter etc complete all as specified and as directed .
M&L for Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and as directed .
S&F Brass bow handles, cast type, anodised 150 mm long etc complete all as specified and as directed .
S & F floor door stopper of brass body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed
S&F 200 mm long Brass, barrel tower bolts , with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed .
S&F for providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch provided by Engr in Charge, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall be provided with windows complete all as specified and directed
S&F Aluminium deco grills made out of fixed indepently on outsIde of sliding window system in Aluminium C channel on top & Bottom, wt of aluminium alloy grill not less than 1.5 Kg/m2 etc complete all as specified and as directed .
All as per item No 27.00 (here-in-before) but in ventilators, with sliding type lovers and provision for fixing exhaust fan/fixed type Glazing aetc complete all as specified and as directed . (Area of ventilator not exceeding 0.50 Sqm) .
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed .
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and as directed .
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame etc complete all as specified and as directed .
S & F 100 size stainless steel butt hinges complete all as specified and directed
S/F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and as directed .
S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F dark shade vitrified ceramic tiles 10mm thick exc 0.18 sqm but n.exc 0.36 Sqm each in floors with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed.
All as per item No 37.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:3.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles , laid over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.
M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, laid over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed .
S&F of PVC (SWR) 75 mm dia pipe as per specification etc complete all as specified and as directed .
S & F PVC (SWR) Band any radious of 75 mm dia etc complete all as specified and as directed .
S & F PVC (SWR) Junction (Single 'T' ) equal or un equal of 75 mm dia complete all as specified and directed
S&F of PVC (SWR) 110 mm dia pipe etc complete all as specified and as directed .
S & F PVC (SWR) Bend any radious of 110 mm dia etc complete all as specified and as directed .
S & F PVC (SWR) Junction (Single 'T' ) equal or un equal of 110 mm dia complete all as specified and directed
S&F PVC Nahani traps 75 mm outlet with stainless steel cover grating etc complete all as specified and as directed .
Taking up or down 15 mm GI steel tubing and connections etc complete all as specified and as directed .
Taking up or down steel tubing and connections for 20 mm bore GI tubing etc complete all as specified and as directed .
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to encs or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wirings etc and making good sutting not exc 10 cm in girth in brick wall etc complete all as specified and as directed .
S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed .
S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings etc complete all as specified and as directed .
S&F in repairs 15mm dia stop cock two way fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed .
M & L in repair angular stop cock CP with wall flange, fancy type 15 mm bore dia etc complete all as specified and as directed .
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed .
S&F vitreous China Urinal, Half stall sensor based type, white (excluding flushing cistern, flush pipe) including taking down old ), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with senssor based spreader, grating and bottal trap with discharge pipe complete all as specified and as directed. (Make : CERA, Item Code S4010102 or equivalent as approved by GE of make in Appx 'B'.
S & F four functions Rain, cascade rain, body jet in one wall mixer with hand shower complete all as specified and directed and approved by GE. (Make- Cera cat No B 2530123 or equivalent as approved by GE).
S&F in repairs one piece EWC with vibe sense duroplast slim seat cover and twin flush fittings 660x 350 x 745 mm (snow white) S trap 300mm and fittings complete all as directed (Make Cera and cat No S1013230 or equivalent as approved by GE )
S&F for CP health faucet with stand 1.5mtr flexible lead including two way brass CP angle stop cock 15mm dia complete all as specified and directed. CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed .
S&F in repairs Ceramic wall Hung wash basin, glossy and polished finish/wall hung/ wall mounted bathroom sink/ super white colour round shape 550 x 440x 135 mm with chrome plated bottal trap etc complete all as specified and as directed .
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed. (Make- Cera cat No F3001461 or equivalent as approved by GE ).
S & F 6 mm thick frameless Oval Bevelled Mirror, Edges grounded, size 24 x 26 inches , fixed with suitable rowal plug & screws complete all as specified and directed.
S&F CP toilet paper holder fixed to walls complete all as specified and directed
S&F in repair Corner glass shelf set of two 6.3 mm thick and 30 cm long with crystal polish on edge (with brack) , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Cat Part No :- ACN-1173 model Continental make Jaquar or equivalent as approved by GE
S&F in repair towel Rack 600 mm long with lower hangers ,brass, chromium plated, fancy type, fixed with and including chromium plated screws and rawl plugs etc complete all as specified and directed. Cat Part No : ACN-1181N model Continental make Jaquar or equivalent as approved by GE.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with crystal polish on edge with and including chromium plated bracket guard and railing 60 cm long , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Cat Part No :- ACN-1171 N model Continental make Jaquar or equivalent as approved by GE.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed .
M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed .
M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed .
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed .
M&L for Preparing old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and as directed .
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface etc complete all as specified and as directed .
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions etc complete all as specified and as directed .
M &L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed .
Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying one coats of cement paint including complete removal of existing surfaces all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one or more coat on old surface of french polishing all as specified and directed
S&F in repair stainless steel curtain rod 25mm dia including brackets ,side knob and 8 Nos stainless steel curtain rings per meter length as approved by GE etc complete all as specified and as directed .
M&L for anti fungal chequered cement concrete tiles 300x300x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
M&L cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in surface channels and drains etc complete all as specified and as directed .
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and as directed .
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
S&F stainless steel tubesing square or rectangular shape cutting, bending, welding, mat finishing , polishing, buffing as in railing, gate etc including heavy duty D glass bracket, bottom cap of pillar, design pillar for top all fittings complete all as specified and directed.
S&F 12mm thick polished toughened clear glass with full glass itching with Corps formation sign colour ( white or coloured), best quality square exc 0.50 sqm each panes, fixed to and including steel frame fancy type complete all as specified and directed.
Demolition of reinforced cement concrete roof/shelves beams, chajjas and similar suspended work etc complete all as specified and directed.
M&L for RCC Nominal Mix Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed .
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.
M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to IS etc complete all as specified and as directed .
All as per item No 87.00 here-in-before but 3 mm dia as in stirrups etc complete all as specified and as directed .
M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) etc complete all as specified and as directed .
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and as directed .
M&L for 19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework etc complete all as specified and as directed .
S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed.
S&F magnet Catcher for cub board complete all as specified and directed.
S & F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
Supply and fixing stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out (Soft/loose soil) etc complete all as specified and as directed .
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point (Soils) etc complete all as specified and as directed .
Excavation in trenches n. exc 1.5 M in depth for foundation etc and getting out in soft /loose soil etc complete all as specified and as directed .
M&L P.C.C Cement concrete (1:4:8) type D-2 using 40mm graded aggregate as in foundation, filling and mass concrete etc complete all as specified and as directed .
M&L Brick work with sub class ‘B’ bricks(using old size burnt bricks) curved on plan exc 6 M mean radius built in cement mortar 1:4 in half brick thick walls etc complete all as specified and as directed .
M&L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork including applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre etc complete all as specified and directed.
Returning filling including watering, ramming in layers n. exc 15 cm thick etc complete all as specified and as directed .
Form work to sides and soffits of roof beams, lintels cantilevers etc complete all as specified and as directed .
Beams, cantilevers, bressummers, lintels over 1.5m span (Cement Concrete) (M-25) (20mm graded aggregates) etc complete all as specified and as directed .
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe-410-W(Gde-E-250) quality-B and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication etc complete all as specified and as directed .
M&L Rendering 12mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed .
M&L Non Skid Glazed ceramic coloured (light colour as approved) tiles of size 300x300x7-8 mm thick as in flooring set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar (1:6) as in floors/ sub floors and pointed in white or coloured cement with pigment to match the colour of tiles etc complete all as specified and as directed .
M&L for 75mm thick cement concrete work (1:4:8)Type D-2 as in sub base for floor, using 40mm graded stone aggregates etc complete all as specified and as directed .
M&L broken brick hardcore of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to true surface etc complete all as specified and as directed .
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS butt hinges 100mm long fiitted with MS square tube complete etc complete all as specified and as directed .
S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed togeather with solvent cement etc complete all as specified and as directed .
S&F 100mm long aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised fixed to doors complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts and fixed etc complete all as specified and as directed .
S&F Mild steel box type ventilator fixed type complete with sash bars dovetailed or welded and with shop coat of zinc chromate primer ready for wire mesh/glass pan fixing etc complete all as specified and as directed .
S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied along with shutters) in Squares n.exc 0.5 Sqm each complete all as specified and directed.
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified.
M&L Rendering 15 mm thick cement plaster in CM 1:4 on wall with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.(WPC shall be measured &paid seperately)
Supply only integral water proofing compound etc complete all as specified and as directed .
S&F 100 mm bore cast iron soil waste and vent pipe in any length with or without ears laid in floor./trenches etc complete all as specified and as directed .
All as per item here 120.00 (here-in-before) but 75mm sand cast iron pipe with or with out ears,with cement joints laid in trenches/walls etc complete all as specified and as directed .
S&F 100 mm cast iron bend etc complete all as specified and as directed .
S&F 100 mm cast iron door bend with access door reducer for connecting pipes etc complete all as specified and as directed .
S&F CI branch pieces single 100mm dia (equal or unequal) ordinary or inverted etc complete all as specified and as directed .
S&F 75 mm CI nahani trap , with grating inl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed .
S&F 100 mm CI floor trap , with grating include. jointing to waste pipe fixed in cement concrete type B1 (1:2:4)(using 20 mm graded stone aggregate) etc complete all as specified and as directed .
M&L Salt-glazed stoneware gully traps 150/100 mm, setting and jointing with solvent cement with outlet pipes and PCC (1:2:4) filling around trap and 25mm thick cover slab etc complete all as specified and as directed .
S&F 75 mm dia cast iron cowl's etc complete all as specified and as directed .
S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc complete all as specified and as directed .
S&F PVC 10 ltr. Capcity valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings complete all as specified directed.
S&F in 15 mm size PVC connections with PTMT nuts of 450 mm long etc complete all as specified and as directed .
S&F Vitreous china Urinal, bowl type, coloured ,flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets,flush pipe,grating and union for 32mm dia PVC pipe discharge pipe connection to drain including urinal spreader chrome plated complete all as specified and directed.
S&F Wash hand basin flat back 550x400mm vitreous chine (white) with cantilever brackets embedded in concrete block including the fiollowing and fixed in repairs etc complete all as specified and as directed . (a) Brass chromium plated waste coupling 32mm bore size (b) Waste pipe PVC 32mm bore (c) Angle iron/cast iron brackets (d) CP Fancy type pillar cock 15 mm dia
M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample). Make: Prayag or equivalent
S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), screwed both ends for 15mm bore of iron pipe or for union and fixed etc complete all as specified and as directed .
S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed etc complete all as specified and as directed .
S&F towel rail CP 20mm dia D-type 60 cm long between flanges and fixed in position etc complete all as specified and as directed .
S&F 450mm long MS powder coated peg set of 5 or 6 including removal of wooden pegs etc complete all as specified and as directed .
S&F of rotational moulded polyethylene water storage tanks duuble layer (cylindrical vertical with closed top) 500 Ltr capesity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed.
M&L for Preparation of new steel primed surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified
S&F 150mm bore salt glazed stone ware pipe Grade ‘A’ as in trenches at any depth complete all as specified (Excavation , earth work & concrete shall be measured and paid separately).
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate , concrete bed to drains laid to falls in trenches in any depath inl. Packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid jointed and tested all as specified.
M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement
M&L for Extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement inl. forms moulds/mitred stopped ends etc.
M & L for Precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone agg) as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in CM all as specified and directed by Engr - in -Charge.
Cutting into existing manholes for connecting new drains, making good to pipe and ren-dering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement con-crete 1:2:4 type B-1 smooth finished, and reforming bench-ing as required (Internal Dia of pipe in 150mm)
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. ake: finolex/Richa/RR Kabel. Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa
(a) One light/fan point controlled by one, one way switch.
(b) One 3 pin socket outlet 5 Amps on the same board with other switches
(c) One 3 pin socket outlet 5 Amps on the independent board.
All as per item No.149.00 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed .
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed .
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed .
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed .
M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed .
M&L for Metal flush box 1/2 module etc complete all as specified and as directed .
M&L for Metal flush box 3 module etc complete all as specified and as directed .
M&L for Metal flush box 4 module etc complete all as specified and as directed .
M&L for Metal flush box 6 module etc complete all as specified and as directed .
M&L for Metal flush box 12 module etc complete all as specified and as directed .
M&L for modular white cover plate with frame 2 module complete all as specified and as directed.
M&L for modular white cover plate with frame 3 module complete all as specified and as directed.
M&L for modular white cover plate with frame 4 module complete all as specified and as directed.
M&L for modular white cover plate with frame 6 module complete all as specified and as directed.
M&L for modular white cover plate with frame 12 module complete all as specified and as directed.
M&L for Modular bell push switch 5 amps piano type flush type etc complete all as specified and as directed .
M&L for replacement of Bell AC 230 volts musical type etc complete all as specified and as directed .
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and as directed . Make :Anchor/Plaza/SSK
S&F for LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl taking down UNSV flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Bajaj/CG/Philips
S&F for LED light fitting 1 x 10 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl taking down UNSV flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Bajaj/CG/Philips
Supply , fixing and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down UNSV and all as specified and directed by Engr-in-Charge.Make : Havells/CG/ Bajaj/ Philips
M&L for Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5W LED filament lamp E27 base complete all as specified and directed.
M&L for wall Picture light, 7 Watt, bronze finish for superior feel long life LED light source warm 3000k with good colour complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 36/42 watt, LED Tunable Panel light fixtures with remote enable 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete incl taking down old UNSV etc complete all as specified and as directed .
M&L for sub main wiring two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm +one run of 6.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
M&L for LED strip 25W Non-integral flexible LED strip light high brightness for indoor applications. Strip can be cut at marked interval to suit desired length existing space/ by cutting suitable space in false ceiling to mount light fitting with required handing/ fixing arrangement incl taking down old unsv light fitting complete all as specified and as directed.
M&L for 25W LED strip driver IP20 complete all as specified and as directed.
Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Chargeote : Old Wall mounted fan deposit MES Store (AGE E/M) Make : Crompton/Bajaj/Havells
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power * input 27 watt with 10% tolerance * , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , * 225 CMM air delivery* , service value *minimum 7.4 * with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer etc complete all as specified and as directed .
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.Make : Bajaj/CG/V-Guard
Supply and fix Rigid non-metallic PVC conduit 25 mm inclusive of all tees, bends, elbows, reducers, bell mouth tube ends, junction boxes and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed .
S&F for Distribution board flush type for connection of Telephone socket including with PVC Conduit pipe and wall chasies cutting making good the distrubed all accessorises etc complete all as specified and as directed.
M&L for motor starter S.P .32A Make : Havells/Legrand/Anchor complete incl taking down old UNSV etc complete all as specified and as directed .Make: Havells/HPL/Legrand
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete incl taking down old UNSV all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.
Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old UNSV complete all as specified and as directed. Make: Legrand Cat No 408636 or equivalent in ABB/Siemens.
Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down UNSV old etc complete all as specified and as directed .408636 or equivalent in ABB/Siemens.
M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated cable, with multi strnded copper conductors FRLSH 1100 volt grade, drawn through and including PVC casing and caping with all conduit accessories and making good to the disturbed surfaces of walls, ceiling, floors etc. to match with the existing surface ) and including provision of 1.5 Sqmm FRLSH PVC insulated copper cable as earth continiuty conductor connected to common earth dolly complete with PVC switch board for fixing switch socket etc complete all as specified and as directed .
(a) One light point controlled by one, one way switch .
(b) One Exhaust fan point controlled by one, one way switch.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed .
M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 6 Sq mm, 2 core complete all as specified and as directed . Note: (i) Excavation and earth work , sand cushioning , cable protection cover, pipe etc shall be measured seperately under relevent items.
M&L for fine river washed sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable etc complete all as specified and as directed .
PERFECT BUILDERS AND SUPPLIERS
SHRI MADAN SINGH
M/S VIKASH TRADERS
SHRI HRIDAY NARAIN GIRI
CHANDRADEO PRASAD
sanjay kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .