REPAIRS TO FOOT PATHS, PLINTH PROTECTIONS, CULVERTS, DRAINS AND CONNECTED B/R WORKS IN NAIR, KULDEEP, POWER HOUSE AREA AT AF STATION CHAKERI KANPUR

Amount

Dismantling posts, embedded in concrete, brick masonry etc, or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling expended metal, any thickness of mess, fixed with steel or wood fillets weight n.exc 4 Kg per sqm including hagges, vegetation etc complete all as specified and directed.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors with or without chequered/pavings n. exc 15 cm thickness below or above ground level including removal of rubbish outside of MD land, complete all as specified and directed.

Demolition of reinforced cement concrete cover slab of any type any condition complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for cement concrete type D2, 1:4:8 mix using 40 mm graded stone aggregate as in foundation, filling and mass concrete, completed all as specified and directed.

Material and labour for Brick work with sub class 'B' bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:4, complete all as specified and directed.

Material and labour for providing precast cement concrete, type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) as window or door cills, lintels, bressumers, steps, quoin blocks (for user with masonry), string course, copings, kneelers apex stones, pier caps, columns posts, boundary pillars, bed plates, lintel blocks, anchorage blocks, bounders (for stone walling), corbels brackets etc (of any sections indicated), with plain fair faces including chamfers weathering, throating etc including necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick CM (1:4) on fair faces of brick or concrete surfaces finished even and smooth using extra cement complete all as specified and directed.

M&L for preparation of surfaces and applying two coats of cement based paint on walls over a coat of cement based primer, all as specified and directed.

Demolition of stone slab/tiles of any position or thickness in floor, aprons, laid, bedded and pointed in any mortar, complete all as specified and directed.

M & L 75 mm thick cement concrete type C-2, 1:3:6 mix, (40 mm graded aggregate) as in sub base of paver block, complete all as specified and directed.

M & L for 25 mm thick Sand cushion bed over hard core including watering and consolidation, complete all as specified and as directed.

M&L machine pressed pre-cast concrete inter locking pavers block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with finished by using rubber moulded technology consisting of appropriate ratio melamine base super plasticizer imported pigment and surface hardening chemical to match surface of high abrasion, resistance and glazed finished with white cement pigment layer upto 10mm thick grey cement and pigment, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M&L for digital tiles, heavy duty, for high traffic, 400 x 400 mm , 10 mm thick (SKD), non skid, acid and scratch resistance fixed with 3 mm spacer & filled with grout, breaking strength not less than 1700N, as in floor, jointed in neat cement slurry make approved by GE complete all as specified and as per direction of Manufacturer’s instructions.

M&L for, coloured, matt finish, elevation ceramic tiles, 3-D with high definition, digitally printed, as per ISO 13006/EN-14411, 300 x 450 mm x 7 to 8 mm thick or as required size on vertical surfaces as dado/skirting, set and jointed in neat cement to match with the colour of the tiles, over and including 10 mm thick cement plaster as backing coat in CM 1:4 make approved by GE complete all as specified and directed.

M&L coloured, clat care tiles with vitrified body, mat surfaces, germ free, tiles 240 x 75 x 6 mm thick or as required size on vertical surfaces as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and including 10 mm thick cement plaster as backing coat in CM 1:4 make approved by GE complete all as specified and directed.

M & L for cement concrete in type B-1, 1:2:4 mix using 20 mm graded stone aggregate, as in benching on edging portion of paver block and proper matching with existing surface, complete all as specified and as directed.

M&L for precast cement concrete kerb stone type B1 (1:2:4) (using 20 mm graded stone aggregate) around the interlocking tiles set in cement mortar 1:4 over and including screed bed in CM 1:4 complete all as specified and directed.

Material and labour for preparation of newly or previously untreated brick or concrete surfaces and applying two coats of synthetic enamel paint over a coat of concrete primer complete all as specified and directed.

M & L 75 mm thick cement concrete type C-2, 1:3:6 mix, (40 mm graded aggregate) as in plinth protection including finishing even & smooth without using extra cement, complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces in soft/loose soil.

S&F post & struts of MS angle iron of any size in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc flat iron fillets (for securing wire mesh) including all necessary drilling bolting or riveting etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply only MS galvanized chain link fencing, of size 40 mm x 40 mm and nominal dia of mesh wire 4 mm complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified.

S&F mild steel screws bolts (machine made) with hexagonal or squre heads at one end and screwed the other ends, each screwed end to fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but nexc 10 cm long (dia of neck 5 to 10 mm) complete all as specified and directed.

M&L for mild steel round bars 10 mm dia and over, cut to length, bend to shape required, including cranking bending spirally for lintels and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, for strengthening of chain link complete all as specified and directed.

Material and labour for preparation of newly steel or iron surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of rex oxide primer complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as surfaces channel and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered/ stopped ends etc. complete all as specified and directed.

M&L for TMT bars 8 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with mild steel wires (annealed not less 0.9 mm dia complete all as specified and directed.

M&L for providing pre-cast RCC cover slab etc of cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate and set in (1:6) cement mortar complete all as specified and directed.

smc system & services

kailash brothers

SHASHI CONTRACTORS

M/S SDS Construction Co.

LOKESH BUILDERS

DHARM ENTERPRISES