Special Repair for Non Residential GRIID Building, Block-C (ASHADEEP), Sector 31, Chandigarh for the year 2025-26.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level : DSR 4.1

1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : DSR 8.14

Red sand stone- exposed face fine dressed with rough backing. DSR 8.14.1

30 mm thick DSR 8.14.1.5

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : DSR 8.14

White sand stone- exposed face fine dressed with rough backing . DSR 8.14.3

30 mmthick DSR 8.14.3.5

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: DSR 9.21

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. DSR10.27

10 x 160 mm DSR 10.27.5

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : DSR 10.30

4.0 mm thick glass panes (weights not less than 10 kg/ sqm) DSR 10.30.1

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4(1cement : 4 coarse sand) : DSR 11.26

25 mmthick DSR 11.26.1

12 mm cement plaster of mix : DSR 13.4

1:6 (1 cement: 6 coarse sand) DSR 13.4.2

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laidon 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. DSR 11.41A

Double charge vitrified tile polished finish of size DSR 11.41A.1

Size of Tile 600 x 600 mm DSR 11.41A.1.1

Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.DSR 9.169

Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.DSR 26.27

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) DSR 26.27.1

Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Please Enable Macros to View BoQ information