Chandpur Lahurimaur to Chametna link road (1)

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5. including labour cess. the compact thickness of each layer shall not be more than 200mm. GST shall be paid extra as applicable at the time of payment.

Construction of granular sub-base by providing Well graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. including royality & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing, laying, spreading and compacting stone aggregates WBM Grading 2 of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MORD Specification Clause 405. including royality & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing, laying, spreading and compacting stone aggregates WBM Grading 3 of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MORD Specification Clause 405. including royality & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per MORD Specification Clause 502, including emulsion & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MORD Specification Clause 503, including bitumen & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per MORD Specification Clause 508, including bitumen, royality & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C,as per MORD Specification Clause 510, including bitumen, royality & labour cess. GST shall be paid extra as applicable at the time of payment.

Brick edging on both side of the road of brick class M-150, 8cm wide and 12cm deep laid with mud mortar including labour & supply of brick finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by engineer incharge of the work including material labour & T&P etc for proper completion of work as per S.I. No. 765. including labour cess. GST shall be paid extra as applicable at the time of payment.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Patri only). including labour cess. the compact thickness of each layer shall not be more than 200mm. GST shall be paid extra as applicable at the time of payment.