Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹12.5 L+₹1.4 L (12.4%)Rejected-Finance | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹13.5 L+₹2.4 L (21.6%)Rejected-Finance | L3 | Rejected-Finance Higher side quoted amount | |
| 4 | L4₹14.4 L+₹3.3 L (29.7%)Rejected-Finance | L4 | Rejected-Finance Higher side quoted amount | |
| 5 | L5₹15.1 L+₹4.0 L (36.0%)Rejected-Finance CHUSHUL | LEH LADAKH | LADAKH | 194101 | L5 | Rejected-Finance Higher side quoted amount |
Tender Value
₹11.7 L
EMD Value
₹24,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang Pin 900270 C/o 56 APO
SPECIAL REPAIR TO TOILET BLOCKS AT NIMU UNDER AGE (I) NIMU
2023_MES_604090_1
80051/22/E8
Open Tender
Civil Works
Item Rate
180 days
Nimu
Class E, cat a (i)
8 documents required · 8 mandatory
₹500
AGE (I) Nimu
₹24,000
Yes
23 Oct 2023
17 Jun 2023
17 Jul 2023
17 Jun 2023
15 Jul 2023
1 Jul 2023
Amount
Sch 'A' Part-I B/R work:- Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and directed by Engr-in-Charge.
Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4, complete all as specified and directed by Engr-in-Charge.
Glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3, complete all as specified and directed by Engr-in-Charge.
Dismantling water tanks Exc 500 & n.exc 1000 litres capacity, complete all as specified and directed by Engr-in-Charge.
1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position, complete all as specified and directed by Engr-in-Charge.
20mm dia nipple suitable for water tank, complete all as specified and directed by Engr-in-Charge.
Taking up/down 15mm bore old tubing on walls and connection of size 15mm bore complete all as specified and as directed.
Taking up/down 20mm bore old tubing on walls and connection of size 15mm bore, complete all as specified and as directed.
20mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceillings or in floors etc, complete all as specified and directed by Engr-in-Charge.
25mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceillings or in floors etc, complete all as specified and directed by Engr-in-Charge.
S & F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.
15mm PVC connection of 600mm long, complete all as specified and directed by Engr-in-Charge.
S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type, complete all as specified and directed by Engr-in-Charge.
S & F in repair 15mm bore Angle valves,fency type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.
S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.
S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in-Charge.
Stainless steel washdown water closet orissa pattern size 580 x 440 mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) vent cowl 110mm in bore, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) junction single,(single T), equal or unequal of 110mm bore, complete all as specified and directed by Engr-in-Charge.
PVC (SWR) 'P' trap 110/110 mm bore, complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.
2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed by Engr-in-Charge.
2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors, complete all as specified and directed by Engr-in-Charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-Charge.
Extruded aluminium alloy handles, fabricated type, anodised 150mm long, complete all as specified and directed by Engr-in-Charge.
Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed, complete all as specified and directed by Engr-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified and directed by Engr-in-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall, complete all as specified and directed by Engr-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
Excavation over area n exc not exc 1.5 m in depth and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge.
Extra over item No 33 for Each addittional 1.5 m depth or part thereof in depth beyound the first 1.5 m depth, complete all as specified and directed by Engr-in-Charge.
Demolition of stone masonary built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.
Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, laid dry as directed , complete all as specified and directed by Engr-in-Charge.
TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
Demolition of RCC of any description and in any position including disposal of old materials to a distance exceeding 500 M but not exceeding 1.0 KM, complete all as specified and directed by Engr-in-Charge.
RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) Beams, cantilevers, bressumm ers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge.
RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge.
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate ) in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) 75 mm thick as in plinth protection, complete all as specified and directed by Engr-in-Charge.
Chequered cement concrte tile 25x25x25mm/30x30x25 mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor, complete all as specified and directed by Engr-in-Charge.
25mm thick Cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) as in topping layer finished surface even and fair complete all as specified, complete all as specified and directed by Engr-in-Charge.
Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and directed by Engr-in-Charge.
Removing surplus excavated soil to a distance exceeding 50 m & n exc 250 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge.
Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.
PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate ) as in block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4, complete all as specified and directed by Engr-in-Charge.
Rendering 10mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate) as in manhole cover set in cement mortor 1:4, complete all as specified and directed by Engr-in-Charge.
Cement Concrete , 1:2:4, type B1 using 20mm graded agg as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
Sch 'A' Part-II E/M :- Taking down copper/aluminum point wiring (light, fan, socket or power) compelte, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-charge.
Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm multistranded in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one light /fan/bell point/bell point/ exhaust fan controlled by one no, one way 5/6 Amps switch, complete all as specified and directed by Engr-in-Charge.
Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm multistranded in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one socket outlet 5 Amp on independent board, complete all as specified and directed by Engr-in-Charge.
Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm multistranded in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one socket outlet 5 Amp on same board, complete all as specified and directed by Engr-in-Charge.
All as per srl item No 59 here-in-before but with conductor of size 4 sqmm (Nominal area) multistranded for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable, complete all as specified and directed by Engr-in-Charge.
Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed by Engr-in-Charge.
Switch Socket combination, multipurpose flush type 2 in 1, 3 pin, 5 Amp and 2 pin 5 Amp, complete all as specified and directed by Engr-in-Charge.
Switch Socket combination, multipurpose flush type 2 in 1, 3 pin, 5 and 16 Amp, complete all as specified and directed by Engr-in-Charge.
Socket outlet, multipurpose flush type 2 in 1, 3 pin, 5 Amp and 2 pin 5 Amp, complete all as specified and directed by Engr-in-Charge.
Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body, complete all as specified and directed by Engr-in-Charge.
LED lights fitting 1x 9W/ 1x 10W, bulk head luminares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge.
LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engr-in-Charge.
LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge.
Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm
Sheet metal powder coated versatile double door SPN distribution borad, 4 way suitable for MCB;s fitted with copper bus bar rated 200 Amps, neutral link, earth bar and rail suitable for use on 240 Volt, 50Hz.
SPN 32 Amp rating 240V, 10KA 'C' curve (MCB) of polessand current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
S&F in repairs to MCB SP 6-32 Amp with 10 KA breaking capacity of 'C' series in distribution noards all as specified and directed.
Supply and Lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standed aluminium conducton of size 10 Sq mm 2 core all as per specified and as directed by Engr-in-Charge.
Earthing complete with galvanised steel earth plate electrode of size (600x600x6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below notmal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternale layers of 150 mm thick charcoal and common salt, connected to falvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts washer, check nuts of galvanised iron or steel all as shown in Electrical plate No 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering piep of bore 20 mm dia GI light frade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade using 20 mm grade stone aggreate including from work cement morter including CI Pit cover with frace necessary excavtion and earth in any type of soil including testing on completion for desired result all as specified.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 18,503.00 and any other reduction if any from quoted amount.
M/S MOHD MUSSA
M/S MUNEER HASSAN AKHON
M/S SONAM RIGZIN
THINLES OTZER
MS SHOWKAT ALIJOO
M/S MOHD KARIM
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .