Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹50.0 L+₹5.0 L (11.1%)Rejected-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹54.7 L+₹9.7 L (21.6%)Rejected-AOC MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹55.2 L+₹10.2 L (22.7%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹55.8 L+₹10.9 L (24.2%)Rejected-AOC H NO 767 NEAR OLD POST OFFICE NEW VADDEM VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L5 | Rejected-AOC Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Oct 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANTAK
GARRISON ENGINEER GOMANTAK
Repair to distress concrete and misc repairs to certain building under AGE BR II GE Gomantak Vasco
2023_MES_618467_1
8580/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹90,000
Yes
21 Nov 2023
12 Sept 2023
12 Oct 2023
12 Sept 2023
11 Oct 2023
27 Sept 2023
Amount
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.
M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:4.
M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep hole in structural members at the interval of 500mm center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element. Work shall b e carried out as under :- (i) Cleaning of holes - Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles - Insert 12mm dia Rohibb Teflon nozzles in cleaned holes. External end of nozzlesto be machine to receive outlet of grouting gun. Fix it inside the hole by applying thixotropic epoxy putty to ensure complete sealing . Cure the system for min 12 hrs. (iii) Cutting of nozzles - Cut the nozzles by chiser after completion of grouting without damaging structural elements.
M&L cutting out cracks to 'V'section not exceeding 5mm in existing roofs walls by using machine cleaning the groove to remove all loose laitance & washing with water applying crack fillet Dr. Fixit crack-X Paste/Dr. Fixit crack X powder with the aid of a putty blade compete all as specified and directed.
Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. including mixed with water proofing compound (as per manufacturers instructions) on concrete surfaces all as directed by Engineer-n-Charge. Note : Water proofing compund measured and paid separately
Suppy only liquid water proofing (Compound) all as specified and directed.
M&L for laying water proofing treatment using 4mm thick APP modified membrane consisting fiver layers membrances with features as specified weighing not less than 3.5 kg per sqm reinforced with non woven polyester fiber @ 160gm/Sqm laid over a coat of cold applied bituminous primer @ 0.40 kg/sqm by torching the membrance and sealing the over lap by 100mm length side and 150mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement curved wel before laying membrance, all as per manufacturer instructions and to the satisfaction of Engr-in-Charge. Note: (i) Irrespective of lap the net covered area will only be measured for payment. (ii). Note: rate is inclusive of APP membrane, SBR Latex (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD OR EQUAVALENT.
M&L Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down Chowkhats or frames exc. 1.5 sq. m but m. exc 4 sqm each with shutters (without taking off shutters from the frames).
Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
S&F aluminium powder coated frame and shutters for windows/ventilators sliding/fixed/openable type complete with necessary fittings such as two concealed lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge. Note : (a) The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass will be measuerd and paid separatelly. (b) The rate quoted by the contractor shall also include necessary wheels for sliding shutters and hinges for side hung/top hung shutter as required at sight and concealed locks for windows. (c) The colour of powder coating shall be as approved by GE.
S&F glazing with 4 mm thick sheet glass ordinary type including rubber beddings/gasket around glass panes all as specified.
S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.
S & F framed work such as grills gratings etc. with ends of bars shouldered and/or revited to forged into spikes, framed guard bars etc conforming to FE-290 Gde E-165 fixed with fasteners all as specified.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent as approved by GE.
M&L for PCC type C1 1:3:6 (using 20 mm graded aggregate) for filling the holes of the hold fasts.
S &F 2nd class H/W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at junctions all as specified.
S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats.
S&F Plain, framed, panelled shutters (any number of panels), 35mm with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S&F second class Hard wood, 30 mm thick, glazed skelton shutter, open rivetted & prepared, with sash bar, divided into square with plane chamfered or rounded, mitred and rivetted sash bars any numbers.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.
M & L for two coat of synthetic enamel painting over new preperation of wooden surface over 10 cm width or girth
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S&F alumiunium allloy, anodized, sliding door bolt, 300 mm, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed (isi marked).
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
Dismantling of floor hearth or wall tiling including cement bedding (not backing) removal serviceable filed to store and rubbish off premises.
Material &Labour for 25 mm thick PCC type B1, (1:2:4), 20 mm graded aggregate as in floor.
M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.
M&L Coloured non skid ceramic tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. completed all as specified and as directed.
M&L for Vitrified Ceramic tiles 8-10 mm thick Colour (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.
S&F Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding,rubbing and polishing complete
M&L 20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms,WHB plaforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite CM 1:4 complete all as specified.
Demolition of cement concrete (unreinforced) nexc 15 cm in thickness above ground level.
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M & L for kota stone slab 20-25mm thick in skirting ,dado,riser, steps and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for chequrred cement concrete tiles 30cm x30cm x25mm thick glosy finished set,jointed and pointed in neat cement slurry in floors .
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)
Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shafts all as directed by Engr-in-Charge.
Providing and applying 15mm thick ready mix external sand faced cement plaster with neat cement rendering at all locations in two coats of masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, inclunding racking out joints, hacking of concrete surface, finishing, curing, and neccesary scaffolding etc complete.
M & L fpr Apply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr iclunding removing all durt and filling cruck surface with water proofing chemical mixed with CM 1:3 on wall complete as per Manufacturere specifications
M & L for applying two coats of Advanced Anti-algal Weather Proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane (Anti fungal paint) on new plastered surface wall/ ceiling and corniers incl preparation of surfaces by brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory wall care putty of birla wall care or equivalent wherever reuired complete all as manufacture instruction (Manufactured by : Asian Paints Damp Proof + Ultima Suprema or equavalent make). Note : The application of paint to be done by the authorised application of Asian paints or equavalent make and contractor shall submit a written gurantee with the authorised dealer of 8 years for any type of colour fading, peeling, flaking, growth of fungus, seepage of water through the paint applied area of any other damaged to the paint. Also the dealer shall appoint a person to inspect and validate the application of the system in stage wise manner.
Chipping off existing loose, damaged concrete from RCC members of all affected RCC Columns, beams, slabs and chajjas on external and internal facades etc beyond main r/f.(if required in the opinion of the consultant), carefully with chisel and hammer including relieving structural members such as column, beam and slabs of their superimposed load partially or fully by provision of adjustable steel props, frames etc. Providing and applying "Rusticide SS' Rust passivator or equivalent as specified in the Brand names to existing r/f bars including wire brushing of r/f, cleaning, washing of concrete etc complete as directed. Providing and applying two coats of rust preventor slurry made out of "Polyalk Fixoprime" or equivalent as specified in the brand names and cement in proportion 1:1.5 to exising r/f bars as directed complete. Providing and applying bonding coat of slurry made out of "Polyalk EP" or equivalent as specified in the brand names and cement in proportion 1:1 to concrete and r/f substrates complete as directed. Providing and applying 'Polyalk EP' or equivalent as specified in the brand names. Polymer modified cement mortar in required porportion (1:5:15) to RCC members including hand packing, curing and making the surface rough for plastering.
M & L for preparation of old surface wall/ceiling by scrapping/rubbing and applying two coats of Advanced Anti-algal Weather Proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian Paint damp proof + ultima suprema, exterior anti fungal paint) on old plastered surface wall/ ceiling and corniers brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory wall care putty of birla wall care or equivalent wherever reuired complete all as manufacture instruction (Manufactured by : Asian Paints Damp Proof + Ultima Suprema or equavalent make). Note : The application of paint to be done by the authorised application of Asian paints or equavalent make and contractor shall submit a written gurantee with the authorised dealer of 8 years for any type of colour fading, peeling, flaking, growth of fungus, seepage of water through the paint applied area of any other damaged to the paint. Also the dealer shall appoint a person to inspect and validate the application of the system in stage wise manner.
M&L two coats of exterior emulsion paint ( Apex or weather coat) or water proof , white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, water based primer and applying SmartCare PU Magnum or approved equivalent in two to three coats to achieve a min. thickness of 1.2mm, etc. complete as per Manufacturere specifications
Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement complete all as specified and directed
M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed
M&L for one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed
M&L for 3mm thick putty on ceilling surfaces and applying two coat of oil bond distemper and preparation the surfaces complete incl washing floors, cleaning glass, joinery,electrical fittings, wiring etc all as specified and directed
Material & Labour for applying two coat of oil emulsion distemper on old surfaces of wall over a coat of primer over wall care putty including perparation of surface by complete removal of distempered and painted surfaces complete.
M/LReplacement of steel reinforcement with TMT CSR bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engr-in-Charge.
Providing and laying Super fluid microconcrete-Roffe crete repairs (or equivalent as specified in the list of brand names) in beam bottoms, columns, slabs etc. including mixing with 5mm to 10mm size aggregates, water proof plywood/steel plate shuttering, pouring, tamping, consolidating, curing etc complete as per manufacturer's specification and consultant's instructions. The item shall be paid on actual consumption of microconcrete.
M/L Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, column ,cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
Material &Labour for Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.
Material and Labour for cleaning of bushes/plants/vegetations on walls/roof/chajjas/ceilings and removing/digging out the roots filling the hole and including applying antigrowth chemical and making good surfaces with cement concrete type, B1, 1:3:6, using 20 mm graded stone aggregate all as directed by Engr-in-Charge.
S&F in repair,CP Glass shelf (22x6"),Cat part no- ES01A,,make-Nixo/Hilife/Cera/Prayag
S&F in repair, CP corner shelf(12"x12") Cat no-ES03A,Make-Nixo/Hilife/Cera/Prayag
Dismantling water tanks exc 250 n exc 500 ltr. capacity and removing to store
Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing to store
S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 500 Ltrs.
S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 1000 Ltrs.
S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store
Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store
Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 25 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE
S&F in repair CP basin mixture, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE
S&F Chromium Plated Toilet paper holder with Paper roll as Approved, fixed including Taking down unserviceable Toilet paper holder of any description complete all as specified and directed by Engineer in charge.
S&F 2 in one Bib Taps 15mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
S & F 15 mm stop valves, fancy type chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed.
S & F 15mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S & F 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F PVC connections 15mm size with PTMT nuts of length 450mm.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) fixed with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms.
S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding.
S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding ditto but including brackets including cutting for and pinning in ends of brackets or erecting stand including Supply and fixing of waste pipe.
S&F in repair 10 Ltr capacity PVC low level cistern “white” with inlet float valve including bracket with 32 mm dia PVC pipe 600 mm long, complete all as specified and directed.
S & F in repair brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.
M & L 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 110mm bore PVC (SWR) bends With acces door any radius.
S & F 75mm bore PVC (SWR) bends with access door any radius.
S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.
S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.
M & L 75 mm thick PCC (1 : 3 : 6) type C2 (40mm graded aggregate) Cement concrete as in plinth protection.
S & F 150mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
S & F Curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc.
Removing building materials etc.to a distance of 1.00 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination as directed.( each load of meterial not less than 2.5 cum )
Demolition of cement concrete (reinforced) nexc 15 cm thick below and above ground floors
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe-410-W(Gde-E-250) quality-B).
M&L two coats of syenthtic enemel paint paint over a coat of red oxide including preparation of untreated New steel surfaces.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chajja( Prepressed to form half circle shape in end portion) ,in multy colour or plain fixed with self tapping screws as specified .
S & F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections
M/S jvsr constructions
Super Construction
M/S Kartik Enterprises
M/S DUBAL CONSTRUCTION
industrial suppliers
K M SUBHANAIAH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .