Karnataka

Active

Works

Electrical

Providing the Street light in the work of Widening and Improvement work to road of Challakere (NH-150A) to Vishwanathanahalli road (State Highway-243) from Km 76.10 to 76.485 in Challakere taluk

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹18.6 LCloses: 14 Jul 20262d left

Tender Value

₹18.6 L

EMD Value

₹46,500

Closing Date

14 Jul 2026, 9:30 pm2d left

Tender Inviting Organisation

Name

Public Works Department

Work Description

Providing the Street light in the work of Widening and Improvement work to road of Challakere (NH-150A) to Vishwanathanahalli road (State Highway-243) from Km 76.10 to 76.485 in Challakere taluk

Tender Information

Tender ID

PWD/2026-27/EL/WORK_INDENT35581

Reference Number

PWD/2026-27/EL/WORK_INDENT35581

Tender Type

Open

Product Category

Electrical

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredClass-1 and Above Electrical Inspectorate Registration Certificates

RequiredAnnual Turn over Certificate with Balance Sheet Statement certified by a Registered Charted Account with UDIN No.

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredQuantity Executed List issued by an officer not below the rank of Executive Engineer/ Equivalent

RequiredTender Bid capacity statement.

RequiredOngoing and existing commitments details

RequiredLabour department registration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Whenever executing authority insists proof of having purchased the materials (used during executing the work) for verification, the contractor shall produce the purchase bills.

The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects for a period of one year from the date of satisfactory completion, commissioning and handing over to user department. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the risk and cost of the contractor.

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

The contractor shall not deviate/alter/execute excess quantities or additional items without prior approval before placing the order joint site inspection will be made by Executive Engineer (Elect.)/ Assistant Executive Engineer (Ele) PWD.

It is the responsibility of the contractor to pursue and obtain all necessary approvals related to work from respective departments.

During the execution of any Minor Civil works or any other minor works which are to be executed, has to be done by the bidder from his end without any charges.

The contractor should see that the existing installation and working of the same are not affected during execution. Only after satisfactorily completion, and charging of new lines, the existing installation, if any shall be dismantled by duly informing to the Department. A site order book of the work shall be maintained and the contractor shall acknowledge the order given by the officers and shall carryout accordingly.

The tenderer shall pass on to the department all the warranties, benefits etc., from the original equipment manufacturers.

The Contractor shall be solely responsible, not withstanding any stipulation by Owner or Engineer, for initiating, maintaining and supervising all safety precautions and programs in connection with the work and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician.

The Contractor shall submit to the employer, for his review and approval, all shop drawings, samples, materials lists, equipment data, instruction manuals, record documents, manufacturers equipment manuals, and other information required by the Contract Documents, before use and execution and before bringing the material at Site.

The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works. The Contractor, at no point of time, shall blame the Owner and or the Project Management Consultant, for the wrong doings of the Contractor, in any part of Works.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer Or District level Officer and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

The tenderer shall scan the original ownership document/ lease / hire commitment Agreement scanned file to the Bid. The Original Documents shall be produced at the time of opening of Technical Bid.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

Tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation.

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work.

All the items includes with all Leads and Lifts, Loading and Unloading, Cost of materials, Labour, Hiring of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and other incidental items which are necessary for the successful completion of the work.

The entire work shall be carried out under the direct supervision of Officers in charge, Executive Engineer (Elect) and Assistant Executive Engineer (Ele). In all cases of differences, disputes, etc., regarding the interpretation of specification of condition in general with any of the work, the decision of E.E (Ele) PWD Division, Bangalore shall be final and binding on the contractor.

SHOP DRAWINGS: Contractor must submit well in advance shop drawings for approvals by the Engineer-in-Charge and approvals must be obtained before proceeding for execution of the works. DIGITAL FORMAT: All the Documents and drawings shall be as a Hard copy as well as on a Digital format in requisite numbers as per the direction of the Engineer-in-Charge.

The project shall be completed well within the contract period, the Tenderer should maintain the works of his scope during the defect liability period, which is 1Year after the successful completion of the work.

Co- Ordinating / solving the right of way problems is responsibility of LEC, in co-ordination with PWD/ local authorities BESCOM.

Tree Cut/ trimming of trees, in Co- Ordination with forest Dept. etc., is the responsibility of bidder / LEC in the way of shifting lines etc.

All the electrical materials which are bind to be used, before dispatching from the manufacture end shell be inspected by Executive Engineer (Ele), PWD.

Clause 25.5 stipulates for Tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e., where quoted rates are very high as well as where the quoted rates are less than estimated rated).

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection

It is the responsibility of the Tenderer who executes the works to get services of the installations from the concerned Service Electricity Companies duly obtaining approval from the govt. electrical inspectorate as the case may be. However the department will pay the deposit/statutory fees if any after hearing the respective statutory bodies.

The contractor should arrange for the visit of The Executive Engineer (Elect.) and Assistant Executive Engineer (Ele.), PWD Electrical Division to the manufacturing premises for inspection and conducting tests as per ISI specifications on LT UG cable before dispatch of the materials at his cost, only after approval from the Executive Engineer (Elect.)/ Assistant Executive Engineer (Ele.) PWD, the materials shall be dispatched or otherwise the cable will not be accepted at site. The manufacturer shall have all testing and laboratory facilities in their premises and contractor shall be present at the premises to make arrangements for conducting tests.

After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications, then such materials will be rejected. The contractor shall remove the rejected materials at his own cost.

It is the responsibility of contractor to co-ordinate with executing authority for commissioning the Street lights satisfactory by observing all formalities up to handing over to the user department. After this only, final bill shall be prepared.

The contractor must obtain the approvals form the Electrical Inspectorate Government of Karnataka if necessary.

It is the responsibility of the tenderer to prepare the as build sketch of detail Road lighting and hand over the same to the end user as per the instructions of the Employer in charge, not below the rank of an Executive Engineer or equivalent.

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-2 K.P.W.D. and further orders there on.

The Contractor must obtain the necessary approvals as per fire norms from the concerned fire authority.

It is the responsibility of the contractor in obtaining permission from the concerned railway authority for laying Cables across Railway crossings.

The Tenderer must submit ongoing and existing commitments details separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail.

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dt. 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund.

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

Conditional Tenders will not be accepted.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five year period i.e. from 2021-22 to 2025-26. b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one single similar work, Such as Providing Street Light Works of Value not less than: Rs.9.29 Lakhs in a single electrical work. The work done certificate should be in the prescribe format K/W-2 Section 3: Qualification information clause 1.3

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-1 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Class-1 & above Electrical inspectorate License

The Tenderer must submit ongoing and existing commitments details separately.

Others -- Ongoing and existing commitments Works List.

The Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal.

Others -- Labour Department Certificate

Financial Status

The Bidders shall deposit EMD Rs. 46,500/- through any e-payment mode.

Others -- EMD

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five year period i.e. from 2021-22 to 2025-26. a) Achieved in at least two financial years a minimum financial turnover (in all classes of Electrical engineering works only) of: i.e., Rs. 18.57 Lakhs with UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected. Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover with Balance Sheet & UDIN No.

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity -(AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.50 Years (06 Months) B - Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. 0.50 Years (06 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Tender capacity statement

Others

Nil

Others -- Nil

Nil

Others -- Nil

nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹46,500

Important Dates

Last Activity

30 Jun 2026

Published

30 Jun 2026

Bid Opening

15 Jul 2026

Download Ends

6 Jul 2026

BOQ Preview

•

Providing the Street light in the work of Widening and Improvement work to road of Challakere (NH-150A) to Vishwanathanahalli road (State Highway-243) from Km 76.10 to 76.485 in Challakere taluk

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanicalmeans as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading,...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500mm Standa...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1000 mm Stand...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thick...

•

Supplying of LED Flood light luminaire with pressure die cast aluminium housing body for thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbon...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Items of work are including co...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A ---- Items of work are including cost and conveyance of all materials, ...

•

Supply and fixing of 3pole power contactor with NO/NC contacts on

•

existing wood/panel board using necessary bolts, nuts, washers

•

and wiring etc., complete with AC-3 Rating and as per IS-13947. 100 A -...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. ---- Items of work are including cost and conveyance of all materials, labour charges ...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip ---- Items of work are including cost and conveyance of all materials, labour charges for a...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per B...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

•

Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm ---- Items of work are including cost and conveya...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 7...

•

(4.064 mm Dia), Std Wt: 131 Kg/KM ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloadin...

•

Optical Fibre Cable (OFC) and its Accessories, HDPE/PLB Pipe 50/42 mm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Brass Cable Gland 25 mm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries...

•

Heavy Duty Copper Terminal Long Barrel

•

25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lea...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying, fixing and wiring 0 to 30V Direct Reading DC Voltmeter/Ammeter. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and...

•

Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead an...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- Items of work are including cost and conveyance of all materials, labo...

•

Spiral Earth Electrode ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A ---- Items of work are including cost and conveyance of all materials, ...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A ---...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-1 bid 35581.doc

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid