PROVN OF CERTAIN REVENUE WORKS AND SPECIAL REPAIR TO ROOF TREATMENT OF BLDG NO CMH-40 AT MIL STN MT ABU UNDER AGE I UDAIPUR

Amount

Taking down cement plaster of any description and Material and labour for 10mm rendering in cement mortar (1:3) on concrete surfaces of ceiling,finished even and smooth without using extra cement.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash.

Taking down cement mortar plaster/ terrazzo plaster of any description on wall including racking out joints,hacking for key,scrubbing down with water etc complete as directed

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement.

Material and labour for 15 mm rendering in cement mortar (1:4) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete. Note:- water proofing compound shall be measured and paid separately.

Supply only water proofing compound,ISI marked.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement paint paint over a coat of priming paint etc all as specified & directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of white wash on wall surface etc all as specified & directed.

Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of white washon wall surfaces etc all as specified & directed.

Material and labour for completely removal of existing treatment on surfaces of wall completely and applying two coats of cement paint over a coat of primer/putty etc all as specified & directed.

Material and labour for preparation of old surfaces of ceiling and applying two coats of white wash.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of any tint over a coat of red oxide zinc chrome primer complete.

Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified.

Removal of old water proofing treament any nos of layers and of any description, incl.demolition and or taking off PCC padding/plaster on RCC slab,also including removing of bitument coating to show the concrete surface to its true colour and roughening etc complete.

Material and labour for Providing, cement concrete(1:2:4) B0 12.5mm graded aggregaded in roof kerbs,roof slab or mud stops, rounded or chamfered on edges all as specified.

Material and labour for rendering 10mm thick in 1:3 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement.

Material and labour APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfacesprimed surface by forced application complete all as specified

Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil.

Material and labour for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation and getting out hard/dense soil including removing surplus soil from site as per directed.

Material and labour Hardcore of gauge n exc. 63 mm of stone/boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

Material and labour for 75mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base

Material and labour for 25mm thick PCC(1:2:4) type B-1 using 12.5mm graded stone aggregate below flooring as a levelling course in floor.

Material and labour for virtified Ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade, ,over and including 15mm thick screed bed in cement mortar(1:6) complete.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weather coat paint over a coat of priming paint etc all as specified & directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emultion distember over a coat of wall putty as priming coat & smooth surface etc all as specified & directed.

Material and labour for brick work with sub class ‘ B’ Bricks straight or curved on plan exec 6 mtr mean radius with CM 1: 6

Supply and fixing of M.S angle Iron door frame conforming to Fe.290.Gde-E-165

Supply and fixing of plain factory made flush shutter shutter(any number of panels) 35mm thick of 2nd class hard wood (Hollock) (botonical name terminalia myrio carpa) for rails and styles kiln seasoned(as per IS-1141) & chemically treated as per IS- 401 and panels of 9mm thick BWP marine grade plywood bounded with high quality liquid phenol,formaldehyde commercial both face,(the over all door shutter shall conform to IS--1003)(Part-I) and complete all as specified.

Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified.

Supply and fixing of MS butt hinges, medium weight,cold rolled of size 100 mm.

Supply & Fixing aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

Supply & Fixing Aluminum anodized barrel tower bolt of extruded section 200mm long

Supply & Fixing 150mm size aluminum handles, cast type anodised.

Supply and fixing of Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with L- typeL or J-type hook bolts including cup washer in roofs,walls etc.with grade of zinc coating 275 complete all as directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete.

Material and labour for 50mm thick PCC(1:3:6) type C-1(using 20mm graded stone aggregate) laid in alternative bays as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 & 3 parts of sand by weight.

Material and labour for RCC(1:2:4) type B1 20mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

Material and labour for RCC(1:2:4) type B1 using 20 mm graded stone aggregate Columns, pillars, piers, posts and struts

Material and labour Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Material and labour for mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete.

Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Supply & Fixing powder coated aluminium window sliding with two track sliding, frame & two track of powder coated aluminium section 61.85X31.75 X 1.20mm thick and shutter of powder coated aluminium sec 18mmX40mmX1.20mm incl necessary joining cleats, glazing clips,rubber packing anodised snap beading,screws etc and locking arrangement etc,making good the disturbed surface in CM(1:3) complete all as specified and directed including glass pane 3mm thick.

Supply & Fixing aluminium anodised grill of 7mmx3mm squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent

Material and labour point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (F.R.L.S) insulated unsheathed 1100 Volt grade cable in and incl concealed PVC Conduit as required (ISI Marked) with accessories including new pressed steel terminal boxes (sunk in wall) including, 3.00 mm thick plastic laminated sheet top cover with 1.50 sq mm insulated unsheathed PVC multistranded covered copper conductor for common earth and connecting to earth dolly making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling all as specified and directed for :-

One light point controlled by one switch one way

One fan point controlled by one switch one way but on casing capping.

One socket out let 5 Amps 5 Pin on same board with other switch

One socket out let 5 Amps 5 pin on independent board

All as per item No 44 here in before but cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistranded insulated copper earth continuity conductor of size 1.5 Sq mm all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano flush type 5 Amps single pole one way.

Supply and fixing socket out let 2 in 1 multi pin 5 Amps flush type universal.

Supply and fixing switch piano flush type 15 Amps single pole one way.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply and fixing Ceiling rose on PVC board size 65 X 50 mm three terminal Complete.

Supply and fixing angle lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet or replace Phenolic laminated sheet all as per directed.

Supply & fixing LED Tube light fitting 20 Watt including tube rod , flexible copper cable of required length from ceiling rose to light fitting complete all as specified. Make: Phillips/Crompton/Bajaj approved by Engr-in-charge.

Supply & fixing of MCB single pole 240 volts 6 to 32 Amps. Make : Same As DBs

Supply & fixing of MCB SPN 240 volts 10 to 25 Amps. Make : Same As DBs

Supply & fixing MCB DB SPN 4 way sheet steel (double door) phospetised powder painted with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door make:- HAVELLS/eq of LEGRAND/ABB/HPL/STANDARD.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm 2core multistranded nominal cross section in service connections

Material & Labour for Providing precast cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) louvres and jallies, 25mm thick (mea sured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid.) including set CM 1:4.

Material & Labour for Providing precast cement concrete type 1:2:4, B-1 (20mm graded aggregate) set CM1:4 in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match all as specified and directed.

Material & Labour for cement concrete (1:2:4) type B0(12.5mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point

Supply and LayTubes Medium Grade,galvanlised with all fitting laid in trenches of dia 80 mm. Note:-i) Rates to be deemed including joint of GI tubing with screwed socket joints,together with all fittings (such as bends,elbows,tees,short pieces,connectors,back nuts,diminishing pieces,caps,plugs and unions,etc)and fixing complete with clips etc.

Supply and fixing in position Cast Iron sluice valve with flanged ends any pattern of size 80 mm ISI marked.

Supply and fix fully automatic star delta starter with sheet steel enclosure suitable for - 5 HP submersible motor in existing location including making connection with PVC insulated 1100 volts grade ,single core , multistranded copper conductor 4 of size 10.0 sq mm ,all as directed and specified .

Supply and fixing in position cast iron non return valve of size 80 mm internally screwed ISI marked.

Material and Labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core.

Material and Labour for Sand Cushioning for PVC cable screened and washed sand and punning to provide a required covers all as specified and directed.

Supply, installation and testing of Submersible pump, electric driven 415 V, TP suitable for 150 mm dia bore well ( Casing pipe size 150 mm) 5 WHP all as specified and directed.

Material and Labour for Stone slab roughly hammerd dressed stone 25 to 40 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over underground cable for protection

Taking down unserviceable street light fitting and supply & fixing of 2 days autonomy Solar LED street light 30 Watt (alluminium die castt) including solar panel polycrystaline 160 Wp, tubular lead acid battery 1x100AH cap with metalic battery box and accessories, external charge control (PWM or MPPT), GI tubing pole length 7 Mtr, metalic panel mounting frame & accessories. Make : Crompton or equivalentt of Philips/Bajaj

Haritwal traders

boon construction company

M/S Balkishan Panwar Construction