Repair and Maintenance of Non-residential building

Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches.as per SI No. 251

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km (5 miles) from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for p

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8 : 4 : 1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. as per SI No. 281

Class-150 brick work in 1:4 cement and fine sand of 1.25 FM mortar in super structure for one brick wall including supply of all materials, labour and T&P etc. required for porper completion of the work as per S.I. No. 305

12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. Add for extra labour to all item of plaster done in ceiling.as per SI No. 587

2cm (3/4") thick cement plaster in dado of skirting in 12 consisting of one part of cement and two parts of approved coarse sand laid in panels, finished with 3mm 1/8") flooating coat of neat cement or cement and marble dust in ratio of 5:1 including supp

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as per SI No. 13.8

Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work. as per S.I. No. 660

One priming coat and two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion.of work. As pe SI No. 649

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per SI No. 13.47.1

White washing two coat including supply of all materials, labour and tools and plants etc. required for completion of the work.

Painting or Vernishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. As pe SI No.641

Cement concrete with 2cm gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI. No. 279a

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. but for slabs. SI. No. 284

Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured.as per SI No. 504

Supply and fixing of 35mm thick commercial quality Sitapur ply or other approved plywood flush shutters including stops and including fixing and adjustment of hinges, bolts, locks handles springs and/or other fittings but excluding their supply and including painting with two coats of black japan on all Iron fittings if necessary and including fixing the glass panes with putty and brad glass to be 4mm thick fitting with necessary screw to be supplied depertmentally.as per SI No. 470a

Providing and fixing first quality Indian Type or Uropien type glazed easthen wore ISI marked WC pan size 580 mm etc. complete as per SI No. 301

Providing and fixing 500mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked (Hindustan, Neyer, Cera make) with RS or CI brackets painted white, 15 mm. dia. CP brass pillar cock with CP metal handle (weigth not less than 400 gms.) ISI marked and 32 mm. dia. CP brass chain with rubber plug, 32 mm. dia. CP brass waste standard pattern with check nut 32 mm. dia. CP brass P or S trap and unions complete with PVC connection 0.50 size including supply of all required materials, labour, T&P etc. required materials labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit, fittings used should be of superior quality. as per SI No. 307

Supply and fixing 6mm (1/4") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work.as per SI No. 628

Providng and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1 : 3 cement mortar (1 cement , 3 coarse sand) finishing with cement sturry & with pigment grouting & Polishing complete I/C S/O all material labour T & P etc. required for proper completion of work excluding base contrete. as per SI No. New Iten

Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge within a distance of 60metres.as per SI No. 706

Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance iof 60metres as per SI No. 708

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60metres.

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60metres.

Fixing panes of glass with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials labour and tools &plants, etc. required for proper completion of the work but excluding cost of glass. 4mm thick as per SI No. 812(ii)

Supply and fixing low density polythene tank sintex or equivalent.as per SI No. New Item

supply & Fixing of 110 mm Internal dia PVC down-pipes complete with rose- heads, bends abd gratings & including supply of necessary M.S. clamps 2.5cmx3mm (1"x1/8") fixed to walls, with & including supply of 15cm (6") long 6mm (1?4") dia nails & including

Disposal of unserviceable materials up-to 3 km distance from site

Supply and fixing Steel sink 600x450x200mm (Eagle Make) Without Drainage Board I/c all complte

P.V.C. low level cistem's 10 lit capacity with all internal fitting parrywere, cert, dip last etc.

Supply & fixing galvanzad mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows & including supply of C.P. Teak wood battens 8cm. x 1cm. (3"x3/8") and including supply and fixing of necessary screws, all materials, labour and tools and plants etc. required for proper completion of the work.As per SI. No. 455

Please Enable Macros to View BoQ information