TENDER FOR ITEM RATE CONTRACT FOR MAINTENANCE OF FILTRATION PLANT LOCATED AT VARIOUS SWIMMING POOLS INCLUDING MONTHLY CLEANING OF POOL FLOORS USING NON TOXIC CHEMICALS AND REPAIR OF INSTALLED MOTORS AND PREVENTIVE MAINTENANCE OF INDUSTRIAL BOILER AND

Amount

Opening of the pressure filter of any capacity , taking out filter media from the tank, cleaning and washing the filter media, sieving and stacking serviceable media in different grading , removing unserviceable filter media to a distance exceeding 100m and not exceeding 150m complete all as specified and directed..

Taking out GM/Brass/PVC nozzles from the filter of any size and type all as specified and directed.

Fixing only serviceable GM/Brass/PVC nozzels retreived under Srl item 2 above after cleaning with air pressure and sulphuric acid complete all as specified and directed by Engr-in-Charge.

PVC nozzles of filter of same size, make and type as replaced complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for ( support of nozzles) and Supplying,fixing and welding mild steel angle iron/ flat/ round bars of required shape and size for base plate of nozzles in pressure fileter , including all necessary drilling , bolting or rivetting , and welding etc., complete and similar work conforming to Fe-290-Gde E-165

M & L preparation of old painted steel and iron surfaces of pressure filter (inside)any description, not otherwise description, over 10 cm width or girth and painting one coat with anticorrosive paint with spay machine including cleaning, stopping and rubbing down and removing all drops etc. complete all as specified.

M & L preparation of old painted steel and iron surfaces of pressure filter (outside)any description, not otherwise description, over 10 cm width or girth and painting one coat with synthetic enamel paint with spray machine including cleaning, stopping and rubbing down and removing all drops etc. complete all as specified.

M & L preparation of old painted steel and iron surfaces piping systems, sluice valves pumps set, motor blower unit, LT panel board etc of filtration plant of filtration plant and painting one coat with synthetic enamel paint with spray machine including cleaning, stopping and rubbing down and removing all drops etc. of swimming pool plant room complete all as specified.

Supplying, laying, packing in 1st layer filter media from bottom 100mm thick, natural river shingle obatined from Haridwar/ Kota/Nazibabad,Bijnor of size 40mm to 25mm duly sieved, disintered and washed with diluted sulphuric acid complete all as specified and directed.

Supplying, laying, packing in 2nd layer filter media from 1st layer 100mm thick, natural river shingle obatined from Haridwar/ Kota/Nazibabad,Bijnor of size 25mm to 15mm duly sieved, disintered and washed with diluted sulphuric acid complete all as specified and directed.

Supplying, laying, packing in 3rd layer filter media from 2nd layer 100mm thick, natural river shingle obatined from Haridwar/ Kota/Nazibabad,Bijnor of size 10mm to 6mm duly sieved, disintered and washed with diluted sulphuric acid complete all as specified and directed.

Supplying, laying, packing in 4th layer filter media from 3rd layer 100mm thick, natural river shingle obatined from Haridwar/ Kota/Nazibabad,Bijnor of size 6mm to 2.5mm duly sieved, disintered and washed with diluted sulphuric acid complete all as specified and directed.

Supplying, laying, packing in 5th layer filter media from 4th layer to top, 600 to 700mm thick, natural river shingle /quartz sand layer from Haridwar/ Kota/Nazibabad,Bijnor of size1.5mm to 0.6mm duly sieved, disintered and washed with diluted sulphuric acid complete all as specified and directed.

Closing of top/Bottom cover of steel dome with by providing suitable size rubber packing including replacement of old MS nut and bolt as required as specified and directed..

Taking out old unserviceable CI sluice valves/non return valve and butterfly valve etc, double flanged, 150/100mm dia of any type and make

S&F Cast iron sluice valve, class PN-1, flanged type, heavy duty, horizontal type, conforming to IS-12846 - 2000, with stainless steel spindle and iron wheel having galvanised and drilled ends, including joints and jointing material such as nuts, bolts, washer, rubber gaskets etc, of size 100 mm bore complete all as directed (Mild steel nuts, washers, gaskets shall be deemed including in unit rate)

S&F butterfly valve conforming to IS13095 of size of 100mm dia,including joints and jointing meterial such as nuts,bolts,washers,rubber gaskets etc,complete all as directed by Engr-in-chagre. (Mild steel nuts, washers, gaskets shall be deemed including in unit rate)

S&F Cast iron non return valve, heavy duty, ISI marked with flanged ends, having cast iron flap and GM ring incl joints and jointing material such as nuts, bolts, washers, rubber gasket etc, of 100 mm bore complete all as specified.(Mild steel nuts, washers, gaskets shall be deemed including in unit rate)

Disconnecting electrically operated monoblock pump set, 3 phase, of 7.5 to 10 HP and taking out from foundation for repair, transporting to workshop for repair and assembling the same after repair, transporting back to site, refixing recommissioning and testing of complete pump set to the entire satisfaction of EIC as directed Note:- Spare parts will be measured and paid for separately as supply only. Cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item. All the repair work should be completed within 72 hours, failing to do so would be subjected to penalty deduction of Rs 1000 per day till repair of works.

Disconnecting electrically operated monoblock pump set, 3 phase, of 5 HP for blower and taking out from foundation for repair, transporting to workshop for repair and assembling the same after repair, transporting back to site, refixing recommissioning and testing of complete pump set to the entire satisfaction of EIC as directed Note:- Spare parts will be measured and paid for separately as supply only. Cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item. All the repair work should be completed within 72 hours, failing to do so would be subjected to penalty deduction of Rs 1000 per day till repair of works.

Disconnecting electrically operated monoblock pump set, 3 phase, of 3 HP and taking out from foundation for repair, transporting to workshop for repair and assembling the same after repair, transporting back to site, refixing recommissioning and testing of complete pump set to the entire satisfaction of EIC as directed Note:- Spare parts will be measured and paid for separately as supply only. Cost of labour for replacement of parts shall be deemed to include in the rate quoted for this item. All the repair work should be completed within 72 hours, failing to do so would be subjected to penalty deduction of Rs 1000 per day till repair of works.

Opening the 3 phase, 7.5 to 10 HP, 415 Volt electric motor carefully removing all burnt /wornout coils by cutting, cleaning the slots and rewinding the supper enamelled copper wire of existng size including varnishing two coats, drying and reassembling the electric motor and testing the smooth running of the motor on full load for 8 hours continuouslly complete all as specified.All the repair work should be completed within 72 hours, failing to do so would be subjected to penalty deduction of Rs 1000 per day till repair of works.

All as per Srl item No. 22 here-in-before but 5 HP capacity

All as per Srl item No. 22 here-in-before but 3 HP capacity

Taking down of existing unserviceable ball bearing for 7.5 to 10 HP electic motor and Supply and fix ball bearing suitable for electric motor of 7.5 to 10 HP capacity

All as per Srl item No. 25 here-in-before but 5 HP capacity

All as per Srl item No. 25 here-in-before but 3 HP capacity

Supply only rubber packing suitable for electric motor of 7.5 to 10 HP capacity all as directed

All as per Srl item No. 28 here-in-before but 3 to 5 HP capacity

Supply only GM bush of pump of 7.5 to 10 HP capacity all as specified and directed

All as per Srl item No. 30 here-in-before but 3 to5 HP capacity

Supply and fix Water seal of pump of 7.5 to 10 HP capacity all as specified and directed

All as per Srl item No. 32 here-in-before but 3 to 5 HP capacity

Supply and fix GM Impeller for pump of 7.5 to 10 HP capacity all as specified and directed

All as per Srl item No. 34 here-in-before but 3 to 5 HP capacity

Supply only Gland of pump set of 3 to 10 HP capacity

Taking out suction sweeper from swimming pool, dismantling for inspection and replacement/ renewal of part, reassembling the suction sweeper of 2-3 feet complete all as specified.Note:-Parts renewed shall be made separately at supply only rates. Note :- Parts will be measured and paid for separately as supply only. Cost of labour for replacement of parts shall be deemed to include in the rate quoted in this item.

Swimming pool wall/floor wooden strip brushes of length of 3 feet, btistle length 1 to 2 inch, medium stiffness, made of polypropylene with polyester bristle of make of suction sweeper

Swimming pool wall/floor wooden strip brushes of length of 2 feet, btistle length 1 to 2 inch, medium stiffness, made of polypropylene with polyester bristle of make of suction sweeper

Vacuum hose pipe 50mm dia made of PVC heavy duty, floating green ribbed colour complete all as specified.

Vacuum hose pipe 80mm dia made of PVC heavy duty, floating green ribbed colour complete all as specified.

Supply rubber packing for section sweeper as per existing size including MS nut bolts washers, studs etc as required at site

Taking dwon UNSV DOL/Star Delta starter and S&F star delta starter push button type, air break with enclosure suitable for 440 V, 50 Hz, 3 Phase motor of 7.5 to 10 HP capacity fixed in repairs all as directed Make L&T/ Havells /Shalabh India Ltd

Taking dwon UNSV DOL/Star Delta starter and S&F Single phase preventor suitable for 440 V, 50 Hz, 3 Phase motor upto 7.5 to 10 HP capacity fixed in repairs all as directed Make L&T , Havells /Shalabh India Ltd

Taking down old unserviceable cable and S&F, 4 core , multistranded copper conductor cable 4 sqmm, PVC insulated and PVC sheathed, 1100 Volts grade for making connections complete all as specified and directed.

Taking down of old unserviceable earth plug enclosure complete and S&F TPN Sheet metal enlosures (factory made) with 10KA, 'B' curve Tripple pole MCB rated 32 Amps capacity with socket plug top 3 pin and earth plug complete all as specified including making niche in wall,mounted flush including making good distured surfaces to match with the existing complete all as specified.

Taking out/ down wornout UNSV rubber wheel of section sweeper pump and S&F Rubber Wheel of size 50 to 75mm dia for suction sweeper pump as per sample complete all as directed by Engr-In-Charge

Taking out/ down wornout UNSV rubber wheel of section sweeper pump and S&F Rubber Wheel of size 150mm dia for suction sweeper pump as per sample complete all as directed by Engr-In-Charge

Taking out/ down wornout UNSV rope of section sweeper and S&F new PVC fibre rope standed type,25mm dia complete all as specified.

Disconnecting and taking up old existing GI pipe and connection of any description / grade and in any position of trenches / under floors/ on walls etc including connected fitting/ accessories and fixtures such as bend, Union, elbow socket etc. all as directed and specified for

Supply and Fixing by renewal of GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on wall with and providing clamps etc complete all as specified & directed, of 100mm size

M & L special fitting class ‘B’ as per IS for Spigot and socket/pipes Bend(any temerarious and angle ) taper any type (Straight, bend, increasing, decreasing or double socket etc ) Tee piece single branch. "Y" junction, double branches cross, (all socket or sockets and spigot) collar, caps and plug upto 150mm bore complete all as specified and directed

Disconneting and taking down air blower with 5HP electric motor carefully from foundation manually or mechanically and transporting to workshop for repair and back, installation, refixing, reconnecting to electric and piping work the repaired compressor complete all as specified and directed by Engr-in-Charge. Note:- The quoted rate shall be deemed to include the cost of transportation, fixing of spare parts complete. Spare parts will be measured and paid for as supply only separately.

Supply only CI non return valve of size 50mm suitable for 5 HP compressor/ blower

Supply only inlet valve suitable for 5 HP compressor/ blower

Supply only outlet valve suitable for 5 HP compressor/ blower

Supply only gasket set suitable for 5 HP compressor/ blower

Supply only safety valve suitable for 5 HP compressor/ blower

Supply only pressure gauge suitable for 5 HP compressor/ blower

Repair and refixing of non return valve including incl joints and jointing material such as nuts, bolts, washers, rubber gasket etc, of 100 mm bore complete including dewatering of UG sump for repair/replacement of non return valve as specified and directed. all as specified.

Taking out of stored water from sump and cleaning entire sump incl removal of algae fomation on sump surface, removal of dirt/mud/unwanted material and checking / refixing NRV (rubber) plates) inside the same complete all as specified.

Labor for lifting of submersible pump along with flanged column pipe, ,cable, safty rope etc from the existing bore well by using suitable T & P etc after disconnecting submersible cable from starter making necessary repair by opening including transporting to wokshope and back and renewal of worn out parts as required complete all as specified for up to 25 HP capasity pumpset. Note:-Part renewed shall be measured and paid separately.

Supply only GM Impellars suitable for 10 to 25 HO submersible pump.

Supply only GM Bush suitable for 10 to 25 HO submersible pump.

Supply only stainless steel sleeve suitable for 10 to 25 HO submersible pump.

Supply only stainless steel shaft of standard size complete suitable for 10 to 25 HO submersible pump.

Repairing/Rewinding for submersible motor 10 to 25 HP, electric driven, AC supply, removing old burn winding, cleaning slots and rewinding the motor using existing gauge of supper enamelled copper wire incl insulation varnishing, greasing, reassembling trsting and fixing in position all as specified by EIC.All the repair work should be completed within 72 hours,

Supply only GM bush for submersible motor suitable for 10 to 25 HP all as specified.

Supply only thrust bearing for submersible motor suitable for 10 to 25 HP all as specified.

Taking down old unserviceable submersible cable and S&F in repair submersible cable flat, water proof, PVC insulated PVC sheathed, 3 core, 16 Sqmm, 1100volt grade multistranded copper conductore incl making water proof joint with submersible motor and normal connection through lugs/ thimbles in to starter panel complete all as specified., 3 core , multistranded copper conductor cable 4 sqmm, PVC insulated and PVC sheathed, 1100 Volts grade for making connections complete all as specified and directed.

M & L for testing alkaline and chlorine concentration of swimming pool at regulat intervals as and when directed by Enginner in charge

Supply only chlorine gas fluid in 100 Kg EMPTY cylinder incl transportation cylinder received from swimming pool to gas filing station elaboral as reqd and directed by Engr-in-charge.

Taking out/ down UNSV chlorine cylinder valve and S&F valve for 100 Kg capacity chlorine cylender complete all as specified.

Taking out/ down UNSV cylinder valve nut and S&F valve nut for 100 Kg capacity chlorine cylender complete all as specified.

Taking out/ down UNSV valve protection hood and S&F valve protection hood for 100 Kg capacity chlorine cylender complete all as specified.

Taking out/ down UNSV gas pipe and S&F chlorine gas pipe of size 6mm Inner dia and 10 mm outer dia complete all as specified.

Supply only copper sulphate for swimming pool

Supply only Potassium peramanganate (KMNO4) for swimming pool

Sample for non chlorination water from various pump houses under AOR of AGE E/M W/S Meerut as and when directed by Engineer-in-charge and testing the water for bacteriogogical/NABL approved labotatories and submission of test report to Engineer-in-Charge within 10 days of direction fortesting complete all as direction by Engineer-in-Charge. Note:- Sample shall be done by the authorised reo of the approved laboratory from whom the testing of water is to be carried out in presence of JE/EIC)

S & F energy hollow shaft motor 75 HP/55KW, 1460 RPM, 3 phase, 50Hzs with non reversible rechet assembly suitable for motar coupling shaft dia 30.1mm dia complete against BER (Stand by) all as specified and directed. Make Jyoti, Chandra pumps,Kirloskar

S & F VT pump set Capacity 60000GPH, 65 mtr head, 200mm outlet diameter including VT pump Discharge head against BER (Stand by) complete all as specified and directed. Make Jyoti, Chandra pumps,Kirloskar

Supply only safety glass for preparation of SCS-10K solution

Supply only hand gloves for preparation of SCS_10K solution

Supply only vapoar/acid gas mask for preparation of SCS-10K solution

AARYANS GLOBAL INDIA

NITHYA INFRATECH

Panwar Construction Co.