Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC CHENNAI | CHENNAI | TAMIL NADU | 600001 | L1 | Accepted-AOC Admitted | |
| 2 | L2₹37.7 L+₹39,742.81 (1.07%)Rejected-Finance | L2 | Rejected-Finance Being not the lowest tenderer | |
| 3 | L3₹38.4 L+₹1.1 L (2.89%)Rejected-Finance DOOR NO 40 MYSORE LODGE ANNEXE ROAD MOORSE GARDEN COONOOR THE NILGIRIS 643102 | COONOOR | THE NILGIRIS | TAMIL NADU | 643102 | L3 | Rejected-Finance Being not the lowest tenderer | |
| 4 | L4₹39.3 L+₹2.1 L (5.50%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L4 | Rejected-Finance Being not the lowest tenderer |
Tender Value
₹39.8 L
EMD Value
₹79,500
Closing Date
15 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Wellintgon
Garrison Engineer Wellington Barrack Post Nilgiris Pin code-643231
REPAIRS REPLACEMENT OF SEWAGE LINE DRAIN AT OTM MD ACCN AT VARIOUS PLACES OF WELLINGTON STATION UNDER GE WELLINGTON
2023_MES_627974_2
8852/E8
Open Tender
Civil Works
Item Rate
180 days
Wellington
As per Tender Documents
4 documents required · 4 mandatory
₹500
GE Wellington
₹79,500
Yes
2 Mar 2024
24 Nov 2023
22 Dec 2023
24 Nov 2023
15 Dec 2023
2 Dec 2023
Amount
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of cement concrete (Unreiforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil, complete all as specified and as directed.
Excavation over areas exceeding 1.5m but not exceeding 3.0m deep and getting out in hard/dense soil, complete all as specified and as directed.
Excavation over areas exceeding 3.0m but not exceeding 4.5m deep and getting out in hard/dense soil, complete all as specified and as directed.
Excavating in trenches, not exc1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exc1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
All as per Item No. 06 hereinbefore but exceeding 1.5m and not exceeding 3.0 M deep complete all as specified and directed.
Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.
PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
RCC (Nominal mix) type - B1 1:2:4 using 20mm graded stone agg for walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings including attached pillasters and buttresses complete all as specified and as directed.
Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed
RCC type - B1, 1:2:4 (using 20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves like etc., complete all as specified and as directed.
Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar works with plain faces including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick column, beam etc (Horizontal or sloping) rough finished flat surface complete all as specified and directed.
Reinforced cement concrete (nominal mix)1:2:4 type - B0 (using 12.5mm graded stone aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.
Use and waste of form work to sides and bottom of floor or roof beams, cantilevers, shelves including supports, overhangs etc., also splays between floors and beams with rough finished flat surface of concrete complete all as specified and directed.
Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillaster, buttresses etc, vertical or batter rough finished flat surfaces of concrete all as specified and directed.
Mild steel framed work such as grilsl, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Mild steel deformed TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Mild steel deformed TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders etc., cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.
Removing excavated soil/material to a distance exc 250m and not exceeding 500m and depositing where directed at a level not exc1.5m above the starting point complete all as specified and directed.
Brickwork with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm internal dia of pipe complete all as specified and directed.
Cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded aggregate for 200mm bore pipe all as specified and directed.
Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded aggregate for 300mm bore pipe all as specified and directed.
Salt Glazed stoneware drain pipes of 150mm internal dia, grade 'A' laid in trenches and jointed in cement mortar 1:1 mixed with spun yarn and testing complete all as specified and directed
Salt Glazed stoneware drain pipes of 200mm internal dia, grade 'A' laid in trenches and jointed in cement mortar 1:1 mixed with spun yarn and testing complete all as specified and directed
Reinforced concrete pipes 200mm dia, class NP2, laid in trenches & jointed with collars complete all as specified and as directed.
Reinforced concrete pipes 300mm dia, class NP2, laid in trenches & jointed with collars complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces mixed with liquid water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement all as specified and directed. Note: Water proofing compound will be measured and paid separately.
Supply only Integral liquid water proofing compound all as specified and as directed.
PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed blocks, lintel band, plinth courses etc., and similar work including necessary formwork complete all as specified and directed.
Plain cement concrete in 1:4:8 type - d2 (using 40mm graded stone aggregate) as in surface channels and drains finished even and smooth with using extra cement including necessary formwork complete all as specified and as directed.
Demolition of cement concrete reinforced in ground floors not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Mechanically pumping out sewage liquid from septic tanks / soakage well /manholes of any size and depth (The distance from the Pumping veh and septic tank/ soakage well not exceeding 1000mtrs) and removal of the same to a distance exceeding 4000 m out side of the building perimeter and disposed off at a place as directed by local municipal / contonment authorities including any type of T&P required etc dewatering of water complete all as directed. Note: 1.Approximate capacity of each load is 4000 ltrs. Contractor shall employ mechanical cleaning vehicle/ Hired contonment board vehicle at his own cost. 2. The septic tank cleaning vehicle shall have pumping, loading and hose pipe etc. 3. The cost of deploying mechanical cleaning vehicle / hiring from contonment board shall be paid by contractor be included in rates quoted.
Cleaning of all blockages in sewage line of any type and any dia, of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manually / mechanically including desludging where required and ordered by Engineer-in-charge and keeping sewer line functional from floor traps, water closet, soil waste / vent pipe, gully trap upto final drop / outlet into septic tank / central sewage system terminating in other joining zone / area or into sewage wells complete all as specified and directed. Note: Required labour / person with T&P / mechanical equipments shall be provided by contractor and the blockage shall be cleaned / cleared as and when reported by Engineer-in-charge.
Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.
Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.
Site clearing by removal of bushes, shurbs by cutting/surface dressing of vegetation and making the surface clean by removing the waste to a distance exceeding 50 mtr and not exceeding 250mtr and deposited where directed.
75mm thick plain cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair without using extra cement complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for such as fencing posts, gates, etc complete all as specified and directed.
Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed
Mild steel works posts and struts as in fencing including cuttings tops to shape as directed, drilling holes, notching for wire, etc.,flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and sililar work conforming to Fe - 290 gde E-165 complete all as specified and directed.
Dismantling fencing wire mesh, any type/size etc complete all as directed.
Supply only PVC coated chain link galvanised mild steel fencing, wire mesh any size (or) type of 3mm to 4mm dia wire complete all as specified and directed.
Supply only chain link galvanised mild steel fencing, wire mesh any size (or) type of 3mm to 4mm dia wire complete all as specified and directed.
Fixing only chain link fencing including line wire, any mesh, size and type to any type of strandard rails, straining bolts etc including provision of binding wire, all as specified and directed.
Mild steel screw bolts (machine made) with hexagonal or square head at one ends and screwed the other ends, or screwed both ends, each screwed ends, to be fitted with washers and one hexagonal or square nut not exceeding 5cm long, diameter of shank 5 to 10mm, complete all as specified and directed.
10mm dia mild steel round bar for fixing of chain link fencing with post all as specified and directed.
Preparing new surfaces of steel and iron work, small articles such bolts, etc treated with two coats of tar or coal tar black paint complete all as specified and directed.
Stone Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and pointing the dressed surface with same mortar as the work proceeds all as specified and directed.
Extra over stone walling for Granite or Trap stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm all as specified and directed.
Keyed pointing to random or polygonal rubble masonry uncoursed or brought upto courses in cement mortar (1:4) all as specified and as directed.
Taking down PVC/ CI pipe jointed in cement mortar, taking out of wall/floor and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) all as specified and as directed
M&L for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.
M&L for PVC (SWR) 110mm dia bore pipe single socketed in any length, with rubber ring joint fixed to walls with PVC/ MS clamps complete all as specified and directed.
M&L for PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.
M&L for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with PVC MS clamps complete all as specified and as directed.
M&L for PVC (SWR) bends ISI marked of any radius 110 mm dia with access door complete all as specified and as directed.
M&L for PVC (SWR) bends ISI marked of any radius 75 mm dia with access door complete all as specified and as directed.
M&L for PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe ISI marked complete all as specified and directed
M&L for PVC (SWR) vent cowl ISI marked 110mm dia bore of pipe complete all as specified and directed.
M&L for PVC (SWR) vent cowl ISI marked 75mm dia bore of pipe complete all as specified and directed.
M&L for PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe ISI marked complete all as specified and directed
Cleaning of bloackage of IWC or WC any type including blockage of Nahani trap or floor trap or gully trap of any size upto the Ist manhole (blockages of any type took place at IWC or EWC, blockage of kitchen trap, bathroom, wash hand basin trap due to stuck of any substance or material due to any other reasons to the entire satisfaction of users/ occupants manually or with using pumping device or any other suitable method or mechanically complete all as specified and directed by engineer-in-charge. Note: 1. Contractor has to depute 02 numbers of safaiwala's to carry day to day blockage complaints which shall be collected from the complaint cell of AGE B/R-I as directed those days required. 2. Contractor has to make sure that the blockage complaints so recieved shall be completed within 24 hours from the time of receipt and for any delay in completion of the particular complaint penalty of Rupees One Hundred Fifty (Rs 150/-) shall be recovered from the dues of contractor for delay in each complaint per day.
ACCITE
AR Mohamed Yakub and Co
Sree Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .