Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-Finance 12 1 1 PUDHUSAMPALLI RAMAN NAGAR POST METTUR DAM 636 403 | METTUR DAM | SALEM | TAMIL NADU | 636403 | ₹6.7 L | L1 | Accepted-Finance L1 |
| 2 | L2₹7.1 LAccepted-Finance 2 206 C PONNAGAR METTUR DAM 636 401 SALEM DISTRICT | SALEM | TAMIL NADU | 636401 | ₹7.1 L | L2 | Accepted-Finance L2 |
| Rank | Bidder | Total Amount |
|---|---|---|
| L1 | V PALANIVELU CONTRACTOR Bid ID 1591419 | ₹6,68,668 |
| L2 | SARVESWARASAMY AND CO Bid ID 1590694 | ₹7,11,597 |
| Sl No | Description | Qty | Unit | V PALANIVELU CONTRACTOR L1 | SARVESWARASAMY AND CO L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for removal of local pressure gauges / temperature gauges and refixing them after calibration in Turbine & Generator areas. | 125 | Nos | 470 ₹58,750 | 480 ₹60,000 |
| 2.00 | Charges for Removal of pressure/ Vacuum/flow switches and refixing them after calibration in Boiler Turbine and Generator areas. | 60 | Nos | 470 ₹28,200 | 480 ₹28,800 |
| 3.00 | Charges for removal of existing transmitters incl. disconnecting the control cables, removal of clamps & manifold and refixing them after calibration in Boiler, Turbine & Generator areas. | 50 | Nos | 470 ₹23,500 | 480 ₹24,000 |
| 4.00 | Charges for dismantling, cleaning & replacement of gaskets and re-fitting of level switches. | 32 | Nos | 2,250 ₹72,000 | 2,300 ₹73,600 |
| 5.00 | Charges for cutting of existing flange from stand pipe (12 inch, 4200 mm) of De-aerator level transmitter stand pipe, grinding the surface in stand pipe, Welding of new flange in the stand pipe, providing new metallic gasket for new flange, fixing of new Guided wave radar transmitters. ( Data sheet – I) | 1 | Nos | 5,000 ₹5,000 | 5,500 ₹5,500 |
| 6.00 | Charges for dismantling, cleaning & replacement of gaskets and re-fitting of displacement type level transmitter. | 4 | Nos | 4,000 ₹16,000 | 4,500 ₹18,000 |
| 7.00 | Charges for removing and refitting of accessories in pneumatic control valves & dampers such as E/P converters, air lock relay, air regulators, positioners and position feedback transmitters sending to lab for testing and receiving the tested instruments from lab. | 54 | Nos | 2,100 ₹1,13,400 | 2,200 ₹1,18,800 |
| 8.00 | Charges for Replacement of HAD/CAD cylinder (8" Bore and 8 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to store.ii) Loading, transporting andunloading of new/serviced pneumatic cylinder from store to field location.iii) Fixing the new/serviced pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings. | 4 | Nos | 5,700 ₹22,800 | 5,800 ₹23,200 |
| 9.00 | Charges for Replacement of burner tilt cylinder(10" Boreand 16 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to store.ii) Loading, transporting and unloading of new/serviced pneumatic cylinder from store to field location.iii) Fixing the new/serviced pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings. | 2 | Nos | 7,000 ₹14,000 | 7,200 ₹14,400 |
| 10.00 | Charges for releasing of Turbine casing Thermocouple. | 25 | Nos | 400 ₹10,000 | 500 ₹12,500 |
Tender Value
Refer Docs
EMD Value
₹6,100
Closing Date
12 Feb 2026, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPSI ES Circle CI UnitIV Removal and refixing of pressure temp gauges,turbine casing Thermocoules,RTDs, transmitters,and switches after calibration ,Replacement of gaskets for displacement type transmitters and level swiches,cleaning of all impu
2026_EB_647625_1
CE-MTPSI-SE-ES-CI-OT117-25-26
Open Tender
Electrical Works
45 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹6,100
Yes
23 Feb 2026
28 Jan 2026
13 Feb 2026
28 Jan 2026
12 Feb 2026
28 Jan 2026
Charges for removal of local pressure gauges / temperature gauges and refixing them after calibration in Turbine & Generator areas.
Charges for Removal of pressure/ Vacuum/flow switches and refixing them after calibration in Boiler Turbine and Generator areas.
Charges for removal of existing transmitters incl. disconnecting the control cables, removal of clamps & manifold and refixing them after calibration in Boiler, Turbine & Generator areas.
Charges for dismantling, cleaning & replacement of gaskets and re-fitting of level switches.
Charges for cutting of existing flange from stand pipe (12 inch, 4200 mm) of De-aerator level transmitter stand pipe, grinding the surface in stand pipe, Welding of new flange in the stand pipe, providing new metallic gasket for new flange, fixing of new Guided wave radar transmitters. ( Data sheet – I)
Charges for dismantling, cleaning & replacement of gaskets and re-fitting of displacement type level transmitter.
Charges for removing and refitting of accessories in pneumatic control valves & dampers such as E/P converters, air lock relay, air regulators, positioners and position feedback transmitters sending to lab for testing and receiving the tested instruments from lab.
Charges for Replacement of HAD/CAD cylinder (8" Bore and 8 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to store.ii) Loading, transporting andunloading of new/serviced pneumatic cylinder from store to field location.iii) Fixing the new/serviced pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings.
Charges for Replacement of burner tilt cylinder(10" Boreand 16 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to store.ii) Loading, transporting and unloading of new/serviced pneumatic cylinder from store to field location.iii) Fixing the new/serviced pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings.
Charges for releasing of Turbine casing Thermocouple.
Charges for releasing, drilling and refixing of RTD in turbine.
Charges for tapping of existing threads and fixing of Turbine casing Thermocouple.
Charges for providing new holes in place of damaged holes and tapping the damaged threads in turbine casing for fixing of thermocouples.
Charges for termination and checking the healthiness of Thermocouples by heating.
Removing the terminal connections, Replacing the broken terminal blocks and reconnecting the terminal connections and checking in Various JBs at Boiler, turbine and mill area.
Charges for rectification and welding of broken doors in junction boxes.
Charges for painting (double coating) and lettering of FIEs (107x60x175 cm) and various sizes of JBs.( Data sheet – II)
Charges for opening and cleaning of all impulse lines and catch pots in mills, Flue gas, primary and secondary air paths.
Charges for cutting and welding of takeoff catch pots in mills, flue gas, primary and secondary air path.
Charges for single point cutting and welding of pipe size ½” impulse lines of mills, flue gas, primary and secondary air path.
Charges for replacement of defective 1” root valve in turbine area which involves the cutting and welding of 2 joints in 1” CS Impulse line .
Charges for replacement of defective drain valve (3/8”) for high-pressure transmitter.
Charges for removing existing leaky 3/8” SS impulse line and worn out connectors, cutting and bending the new line as necessary, fixing SS connectors with nut and ferrule in the line and connecting back the new line without leaks in high pressure transmitters.
Charges for replacement of defective 1/2” SS instrument valve in various locations of boiler and turbine area.
Charges for Overhauling of Servo valves for HP/LP bypass system
Copper Washer (Sl.No:1)
Teflon O-ring (Sl.No :3 )
Gasket (Champion 54 grade / Klinger 1000 grade) size 280 x 280 mm. (Work Sl.No:4)
Gasket (Champion 54 grade / Klinger 1000 grade) size 240 x 240 mm. (Work Sl.No:6)
Paint ( Grey/white) (Sl.No :17 )
Thinner (Sl.No :17 )
4” Paint Brush (Sl.No :17 )
2.5 Sq.mm Elmax Terminal Block (Work Sl.No:15)
Pad lock & Hinge (Work Sl.No:16)
2.5 mm CS welding rod electrode (90 Nos./Box)(Work Sl. Nos: 5,16,19,20,21)
Gas cutting for takeoff catch pot and 1/2” impulse line.(Work Sl.No:5,19,20,21)
High pressure drain valve. (Work Sl.No:22)
Charges for consumables such as Teflon Tape, PVC Insulation tape, Cotton Waste, Emery Sheet,Glass putty, Rustolene, bolt and nuts, Anabond, etc. (Work Sl. No.: 1 to 25)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_776431.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid