REPAIR TO JOINERY, PLASTERING, PERIODICAL SERVICES AND MISC B/R WORK OF MH AREA UNDER GE (U) MEERUT CANTT.

Amount

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).

Taking down Chowkats or frames exc. 1.5 Sqm and n,exc 4.00 sqm each, with shutters (without taking off shutters from the frame).

S&F 15 micron aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshsing Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.

S&F aluminium window shutter side hung glazed/ gauzed shutter with frame using with aluminium extruded section of Make- Jindal, Hindalco or Nalco, box section of size 63.50 mm X 38.10 mm for frame and 47.62mm x 44.45 mm for shutter styles and rails, thickness of aluminium sheet 1.25 mm and glazing with and including 5 mm thick tinted float glass fixed with and including aluminium U channel and glazing plates at bottom including aluminium triangular glazing beading with U rubber stays etc with and including aluminium fancy grill and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with suitable size of aluminium strips fixed to aluminium frame (chowkhats) including provision of stainless steel hinges of 75mm size 02 Nos on each shutter, aluminium fancy type handle of suitable size 02 Nos for each shutter, aluminium powder coated tower bolt of extruded section 125mm long 02 Nos on each shutter complete all as specified and directed.

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to +/- 5mm made out of standard aluminium moulded section of size 6mm x 7mm

S&F aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf, aluminium anodised fancy extruded section 200mm long handle-01 No per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf, aluminium anodised aluminium body hydraulic door closer 01 No per leaf of suitable capapcity, floor door stopper of anodised aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed. Make: Jindal/Indal

S& F pressed steel frames size 125X60mm for dors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified

S& F pressed steel frames size 106X60mm for dors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified

M&L cement concrete type B0 1:2:4 9( 12.5mm graded aggregate ) as filling in door frame compltete.

S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a)

S&F 30 mm thick shutter flush shutter , solid core construction wth block board core and pywood face panels, commercial type on both sides

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down of existing unserviceable door closer and S&F Aluminium ( Extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

M&L preparation of new surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying two coat with synthetic enamel paint over of one coat of pink primer including cleaning, stopping and rubbing down and removing all dropings complete all as specified and directed.

M&L preparation of new steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one two with synthetic enamel paint over of one coat of red oxide including cleaning, stopping and rubbing down and removing all drops ,dirts etc. complete all as specified.

S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

S&F 150 mm overall length of cover plate floor dooe stopper of aluminium alloy body and tougue with hard drawn steel spring

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned track or galvanised wire staples

S&F 100 mm MS, Butt hinges,medium weight cold rolled mild steel fixed with screw complete.

Material and labour In repair 12 mm thick prelaminated particle boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards partition etc complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F 3mm pin headed thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F 5.0 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F in repair galvanized MS wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified.

Supply and fix in repair 5mm thick insulated plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Material and labour for Providing and fixing anodised aluminium partition work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom (half portion) and sides with required 12 mm thick EPDM board with rubber/ neoprene gasket and top of half portion with 5.0 mm thick glass with Aluminium snap beading for glazing/ paneling etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, , C.P. brass/ stainless steel screws, all complete as and the directed.

Taking down aluminium door/window glass with neoprene rubber and beading and S&F 5.5 mm thick figured glass in door by means of neoprene rubber ,aluminum beading or with other means with suitable fixing in opening specified and directed

Taking down aluminium door with shutters of any size , reparing of hinge block and replacement of rubber beading and hydraulic door closer as per site required and plate and fixing of door and shutters in the same opening in its position complete all as specified and directed. Note : The cost of rubber beading and hydraulic door closer including fitting are included in this item and not to be paid separetely, complete all as specified and directed .

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 05 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L for carrying out treatment in following step as given below:- Step (i) M&L for complete removal of existing treatment by scrapping with wall sandar as approved having RPM not less than 1500 sanding pad of 80 Grit having dia 17 cm to 25 cm to make the surface free from dust, loose paint etc. from existing plastered surfaces of wall. Step (ii) M&l for applying waterproof cement based putty @ 1 kg per Sqm of average thickness 1 mm of approved make over prepared surface and sanding of the putty surface with sandar machine of approved make having RPM 1500, dia 17 cm to 25 cm make the surface free from dust. Mix the putty powder by adding 40-50% water and mix it withapproved mixer Step (iii) M&L for one coat of acrylic water based exterior grade primer @ 0.9 liter per 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine. Step (iv) M&L for water based premium acrylic smooth exterior emulsion paint of approved make with low VOC less than 50, Anti Algal properties in two coats applied over priming coat with fully automatic airless spray machine of paint application.

Removing existing paint by mannual scrapping and sanding with Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall surface complete all as specified and directed

Providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare thenew or old surface even and smooth on wall surface complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Putty mixer Step 2 : Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with approved Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified.

M&L for applying one coat of acrylic waterbased interior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. by skilled labour on old or new wall surface complete all as specified. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc

M&L for applying two coats of oil bound distemper applied over priming coat on wall surface complete all as specified. Note- Allow 6-8hrs to dry the surface for painting of subsequent quotes.

Preparation of old/new decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.

M&L for Applying one coats of Oil bound distemper on wall surface complete all as specified and directed.

M&L for Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old/new decorated internal wall/ceiling surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of White wash/colour wash complete all as specified and all as directed.

M&L for preparation of old/new decorated external wall surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of cement base paint complete all as specified and all as directed.

AEGIS INTERNATIONAL (BID ID -3378700)