Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC | L1 | Accepted-AOC First lowest | |
| 2 | L2₹46.3 L+₹29,243.95 (0.64%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC Highest Rate | |
| 3 | L3₹46.4 L+₹38,916.90 (0.85%)Rejected-AOC | L3 | Rejected-AOC Highest Rate | |
| 4 | L4₹47.8 L+₹1.8 L (3.91%)Rejected-AOC | L4 | Rejected-AOC Highest Rate | |
| 5 | L5₹48.3 L+₹2.3 L (5.00%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC Highest Rate |
Tender Value
₹45.5 L
EMD Value
₹90,900
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T54 OF 85 FRW AND CERTAIN REVENUE AND MINOR WKS AT RMS
2022_MES_572063_1
8513/C/E8
Open Tender
Civil Works
Item Wise
180 days
RANGAPAHAR
Please refer tender documents
3 documents required · 3 mandatory
₹500
Yes
GE 868 EWS
₹90,900
Yes
4 Feb 2023
30 Dec 2022
28 Jan 2023
30 Dec 2022
26 Jan 2023
14 Jan 2023
30 Dec 2022 - 6 Jan 2023
Amount
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering complete all as specified and directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for Cement concrete (unreinforced) complete all as specified and directed
Demolition of reinforced cement concrete in any position not other wise described complete all as specified and directed
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed
Taking down Chowkhat or frames but exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and directed
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and directed
Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and directed
S & F Plates(plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 W (Gde-E-250) quality B
S&F for post of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed
All as per item No 18 hereinbefore but in skirting including 10mm thick plastering for backing coat in cement mortar 1:4 complete all as specified and directed
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat complete all as specified and directed.
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps.
M&L for second class hardwood as in scantlings clean sawn timber fixed complete all as specified and directed.
S & F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW complete all as specified and directed.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
S &F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.23 (a) complete all as specified and directed
S&F 30 mm thick 2nd hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. ( with and without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. complete all as specified and directed.
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators & partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc.complete all as specified and directed
S&F for anodised aluminium powder coated any colour window/ventilator shutter fixed type without sash bar aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing etc.complete all as specified and directed
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and directed.
M & L for fixing 4mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specifed and directed by Engineer-in-Charge
S&F Sheet glass 10mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and directed.
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks or galvanised wire staples all as directed by Engineer-in-Charge
S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F Mortice lock,vertical type Brass 2 levers, size 100 mm complete all as specified and directed
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S & F 100 size stainless steel butt hinges complete all as specified and directed
S & F 75 size stainless steel butt hinges complete all as specified and directed
S & F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed
S & F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed
S & F brass, sliding door bolt with sand or die-cast hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed (300mm long) complete all as specified and directed
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S & F floor door stopper of aluminium alloy body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed
S & F floor door stopper of brass body and tonguewith hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed
M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer in any tint all as specified and directed
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and directed
M &L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as directed by Engineer-in-Charge .
Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying one coats of cement paint including complete removal of existing surfaces all as per manufacture instructions all as specified and as directed by Engineer-in-Charge .
S & F in repairs for Draperly rod/Harrison rails of CP of 20 mm dia with fixing brackets, Stops rollers and rings etc
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection, finished fair and even without using extra cement with and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed
M & L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed
Taking up or down steel tubing 15mm bore and connection including all fittings complete all as specified and directed.
S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GI fittings complete all as specified and directed.
M & L for bib cock CP with wall flange, fancy type 15 mm dia bore complete all as specified and directed.
S&F grating doom 100mm dia with waste hole of PTMT (Min wt 25 gms) complete all as specified and directed.
S&F in repair PVC (SWR) 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
M&L for chequered cement concrete tiles 200x200/300x300x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
Surfaces Dressing n exc 15 cm deep in soft and loose soil complete all as specified and directed.
M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick broken stone, water and ramed to atrue surfaces complete all as specified and directed.
M&L for Cement Concrete type D-2, 1:4:8 (40mm graded stone aggregate) 100mm thick as in sub base of floor complete all as specified and directed
M&L for PCC type C-2, 1:3:6 (40mm graded stone aggregate) 75 mm thick as in sub base floor complete all as specified and directed.
M&L cement concrete 1:2:4, type B1(20mm graded stone aggregate) as in coping, kerb etc including necessary form work complete all as specified.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 complete all as specified and directed.
M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.
M & L for shingle filling 25mm thick sand cushion layer complete all as specified and directed
M & L 25 mm thick cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in sub base etc complete all as specified and directed.
S & F light shade vitrified ceramic tiles 10mm thick n.exc 0.36 Sqm each in floors with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed
All as per Ser Item No. 82 above but on vertical surface such as skirting, dado risers to steps over and including 10mm thick bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
Supply and fixing bitumen blown any grade, applied hot two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat over polythene film, black 50 micron laid in floors all as specifed and directed
S & F only liquid water proofing compound etc complete all as specified and directed.
M & L 40mm thick PCC 1:2:4 type B-0 (12.5mm graded crushed stone aggregate ) as in Damp proof course to horizontal or vertical surfaces including necessary form work complete all as specified and directed.
M&L for RCC (nominal mix) type A1 (1:1.5:3 ) 20mm graded stone aggreagate as in, lintel beams complete all as specified.
M & L formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressumers, lintels, cantilever, shelves including supports, overhangs, etc also splys between floors and beams etc compete all as specified directed.
M&L for deformed steel bar 10 mm dia and over, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and directed.
All as per Item No. 89 above but 05mm dia and over upto and including 10mm dia T or bars as in stirrups, spacers and binders, conforming to IS-432 (Part-I) etc compete all as specified directed.
Returning, filling in trenches including shearing , leveling, watering in layers n.exc 25cm thick soft loose soil complete all as specified and directed.
Removal of excavated soil n.exc 50mtr distance and depositing where directed n.exc 1.5m above the starting point complete all as specified and directed.
E/M PORTION Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
(a) One light/Fan point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 94 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A Make : Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type Make : Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type Make : Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type Make : Havells/Legrand/Anchor
M&L for Bell push 6A Make:- Havells/Legrand/Anchor
M&L for Bell Multi Music type Make:- Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc. Make : Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Havells/Legrand/Anchor
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 0.5 watt LED lamp red, green suitable for lamp holder fittings. Make:- Havells/Legrand/Anchor
Taking down carefully LED fittings of any size removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.
Taking down S&F LED Tube light fitting 20 Watt Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton/Havells/Bajaj/ Philips.
All as per item No 107.00 above but 10 watt LED, 2' batten (Warm white), Wall mounted with polycarbonate housing/ batten. Make : Havells/Bajaj/Philips/Crompton
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge. Make : Crompton/Havells/Bajaj/ Philips
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Crompton/Havells/Bajaj/ Philips
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Crompton/Havells/Bajaj/ Philips
M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.Make : Legrand/ABB/Siemens
M&L for MCB SPN 40-63 Amps 10KA 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed
M&L for MCB SP 6-32 Amps 10KA, 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for replacement Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long of complete all as specified and asd directed.
M&L for replacement Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust Fan complete all as specifed and as directed.
Supply, installation, commissoning and testing of feeder pillar board, CPRI type tested, kiosk type outdoor type, LT (415 volts, 50 Hz, 3 Phase with neutral, 4 wire supply), floor mounted, factory assembled, weather and vermin proof ( Protection Class IP-54), made out of 3.15 mm thick MS sheet CRCA sheet of suitable size required for incomming and outgoings with front & rear opening doors duly hinged upto full door height with special steel hinges, rubber lining, bakelite sheet, locking arrangements, steel tower bolt both side of the doors, powder coated internally and externally, CRCA sheet for panel shall be mounted on 40mmx 40mm x 5mm angle iron frame and shall have channel base of appropriate size and mounted on PCC foundation built in PCC 1:3:6 type C-2 be using 40mm graded crushed stone aggregate including earthwork complete , platform height of the panel at least 2 feet from the ground level as recommended or directed by the Engineer in charge comprising of following. INCOMMING a) Bus bars chamber comprising 4 Nos copper strip bus bars PVC insulated made of copper strip of size 50x 10mm, PVC sheathed with colour coding. b) MCCB 3 Pole 63 Amp 16 KA, thremal micteck Qty 01 Nos c) 3 phase, 4 wire supply flush mounting multifunctional meter Cat Part Sl No WM30KFC3COO Nova suitable for LCD display of L&T or equivalent of make AE/C&S - 01 No d) LED indicators for three phase i.e RYB 240 volts/ 50 Hz - 01 Set of Make RASS e) CT's as recommended by mafuracturer or directed by Engineer-in-Charge of appropriate ratio.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
All as per item No 125.00 but 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed.
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
Material and labour for cutting of bituminious road/hard standing PCC path/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturded road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surfcae complete all as specified and as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
Material and labour for (concelaed Type) point wiring including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: A. Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. B. The Rate of point wiring includes the following :- (i) Copper wire (ii) PVC Conduit with accessoreis (iii) Chase cutting (iv) other accessories such as modular GI box, modular inner plate and modular Cover plate etc Make : Richa/RR Kable/Finolex Make of Casing/Capping/Conduit pipe : Richa/Finolex/Supreme
(a) One light/fan/Call bell controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 133.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module complete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L for modular switch 1 way 16A, 1 module complete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L for Modular Socket ,6A-2/3 pin combined 2 module complete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L Modular Socket ,6A/16A-2/3 pin combined 2 modulecomplete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L for modular Bell push 1 Way 6A 1 Module complete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L for bell AC 230 volts musical type complete all as specified and as directed. Make : Havells/Anchor/Legrand
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells/Crompton/Philips
M&L for sub main wiring (concelaed Type) two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.Make : Havells/RR Kabel/Finolex
Supply and fixing for Bed side light 3Watt LED light reading in bed just got easier with this colletion of adjustable LED bedside lights complete all as specified and as directed.Make :Havells/Crompton/Philips
Supply and fixing for LED 12 watt Picture light/Mirror light complete all as specified and as directed. Make : Havells/Crompton/Philips
Supply and fixing for 6 Watt LED antique copper gold Focus spot ceiling wall light warm white complete all as specified and as directed.Make : Havells/Crompton/Philips
Supply and fixing for LED 3 Watt Decorative wall Mount light Fancy type,complete all as specified and as directed.Make : Havells/Crompton/Philips
M&L for modular white cover plate with frame 1/2 module complete all as directed.
M&L for modular white cover plate with frame 3 module complete all as directed.
M&L for modular white cover plate with frame 6 module complete all as directed.
M&L for modular white cover plate with frame 8 module complete all as directed.
S&F for Power unit for 2 ton AC for module complete all as specified and as directed.Make : Legrand/ABB/Siemens
Shri Atoshe Tuccu
Ms ARENKOKLA CONTRUCTION
PERFECT BUILDERS AND SUPPLIERS
SHRI MADAN SINGH
MS SADHNA RAHUL
TOSHIKA SUMI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .