Electrical installation work

Amount

Supply & Installation of 415V., 50 Hz, floor mounted, industrial type, LT Panel Board with following accessories made out of 14 SWG (BBC) & 16 SWG (Cable end boxes) CRCA shet on MS frame structure made out of MS angle (30 x 30 x 5 mm) & MS flat (30 x 5 mm). The main connection & interconnections to switches are of suitable size & capacity of wires with colour sleeves. Paint shade should be RAL 7032 both inside and outside. Continuous Earth bus of size 40 x 6 mm to be provided at a height of 150 mm from the bottom and brought outside of the panel of 75 mm length.

INCOMER

a) 415V, 160A TPN SFU with 3 nos. DIN type 160A HRC Fuse (minimum 80kA) having blown fuse indication and with following MFM & CTs. [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set -- 1 No.

i) Digital Multifunction Meter (class 0.5) capable of display of Current, Volt, KWH, PF, MD with date & time stamp etc. - 1 no

ii) CT's for metering; CL:0.5, 160/5A, 5VA, tape wound (Make- Kappa) for all three phases

BUSBAR

S&F 415 V, 300 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 40 mm x 5 mm] mounted on non-hygroscopic porcelain insulator / hylum sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

OUTGOING:-

a) 415V 125A TPN SFU with 3 nos. 125A HRC Fuse (minimum 80kA) having blown fuse indication. [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set --- 2 Nos.

b) 415V 63A TPN SFU with 3 nos. 63A HRC Fuse (minimum 80kA) having blown fuse indication. [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set --- 5 Nos.

c) 415V 32A TPN SFU with 3 nos. 63A HRC Fuse (minimum 80kA) having blown fuse indication. [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set --- 1 No.

INDICATORS: 3 nos LED R, Y, B indicators (Siemens) with 3 nos 6A SPMCB

SAFETY: EI Danger board.

S & Installation outdoor type both sided door feeder piller box [size 2300(H) x 1800(W) x 500(D) mm] fabricated from 5 mm thick sheet steel with Double Locking arrangement and S/F 3 keys padlock (7 lever godrej, navatal lock) with door handle & comprising with the following electrical accesories & duly Painted by synthetic enamelled paint after 2 coats of red led primer . Pillar box should be grouted with 4 nos. angle iron leg on bricks foundation with cement, plastering and neat cement finish having 450mm height from Gr. Level.

INCOMER: 1 no 415V, 160A, SFU with 3 nos. 160A HRC Fuse (minimum 80kA) having blown fuse indication [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set --- 1 No.

BUSBAR: 200 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 30 mm x 4 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

OUTGOING: 415V 63A TPN SFU with 3 nos. 63A HRC Fuse (minimum 80kA) having blown fuse indication. [Make :- L&T/ ABB/ Schneider/ Legrand] Complete Set --- 4 Nos.

METERING: Digital Multifunction Meter (class 0.5) capable of display of Current, Volt, KWH, PF, MD with date & time stamp etc. - 1 no (Approved brand)

INDICATORS: 3 nos LED R, Y, B indicators (Siemens) with 3 nos 6A SPMCB

OTHER: Two numbers lighting arrangement with control switch to be made inside the box as working light and 1 no. 250V., 5/15 combined plug socket & switch.

SAFETY: EI Danger board 1 no.

Supply & Laying 1.1KV gr. 4 Core 70 mm² XLPE Ar./Al. Cable incl. making connections as per direction of E.I.C. as follows :- (From Existing Feeder pillar to Main Panel) (Make: Havells / Polycab / RR Kabel)

On wall surface by MS saddle with 2 nos. 10 SWG G.I. Wire as to G.S.

On prelaid cable tray with 2 nos. 10 SWG G.I. Wire

In underground trench with brick protection as to GS

In GI protection pipe as to GS

Supply & Laying 1.1KV gr. 4 Core 50 mm² XLPE Ar./Al. Cable incl. making connections as per direction of E.I.C. as follows :- (from Panel to Feeder Pillar Box ) (Make: Havells / Polycab / RR Kabel)

On wall surface by MS saddle with 2 nos. 10 SWG G.I. Wire as to G.S.

On prelaid cable tray with 2 nos. 10 SWG G.I. Wire

In underground trench with brick protection as to GS

In GI protection pipe as to GS

Supply & Laying 1.1KV gr. 4 Core 16 mm² XLPE Ar./Al. Cable with 2 nos. 10 SWG G.I. Wire incl. making connections as per direction of E.I.C. as follows :- (from Main Panel to Control panels of Mortuary cooler) (Make: Havells / Polycab / RR Kabel)

On Wall Surface incl. S&F MS saddle as to G.S.

On prelaid cable tray

S & Fixing of compression type brass cable gland including end finishing of the following size cables :-

4 Core 70 mm² XLPE Ar./Al. Cable

4 Core 50 mm² XLPE Ar./Al. Cable

4 Core 16 mm² XLPE Ar./Al. Cable

Supply and fixing perforated GI cable trays with perforation not more than 17.5% suspended from ceiling inclu. S/F GI connector 6 mm dia MS suspender, bolts & nuts & steel fastner etc. as required of following size inclu. Al. painting of MS support [200mm x 50mm x 1.25 mm (18 swg) with 25 x 25 x 3mm angle iron support.

S & Fixing of 240V, 2+10 Way Double Door Type SPN MCB BDB (IP-42/43) comprising with 1 No. 240V., 40A. DP Isolator as incoming and 10 nos. 6/16A. SP MCB (10 Ka, C-curve) as outgoing with DIN rail, N & E Bar and other accessories, embedded in wall, incl. necessary interconnection as per direction of EIC as follows:- (Make - Legrand, / ABB Elegance / Schneider)

Distribution wiring in 1.1 KV grade 3 x 1.5 sq mm S/C stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / Havells / Polycab / RR Kabel) partly in 19mm dia 3mm thick polythene pipe embeded in wall for vertical portion & in 20mm dia PVC Rigid conduit for ceiling & horizontal run on wall to light/fan points complete with 6A Piano Key type Switch (Anchor) fixed on duly painted 16 SWG M.S. Box with 3mm thick Bakelite top cover and 3 nos. suitable size cu connecting bars each on double bakelite insulation chairs duly fixed inside the switch board flushed in wall with earthing attachment & mending good damages to original finish as to GS. [Avg. Run 8 Mtrs]

S & Fixing of 240V., 6A. 5 Pin Plug socket without Top and Piano Key type switch (both Anchor) on Board and Necy. Interconnections as per direction of E.I.C.

Supply & Drawing following sizes S/C stranded 'FRLS' PVC insulated & unsheathed copper wire (Make Finolex / Havells / Polycab) in 19 mm bore 3 mm thick polythene pipe embedded in wall and mending good the damages incl. making connections as to G.S. :-

2 x 2.5 & 1 x 1.5 mm² for 16A power plug

2 x 6 & 1 x 4 mm² for SPN DB

Finishing the end of following sizes copper wire end / PVC cable/Al. with dowells solderless socket by crimping method as pre GS as follows :-

2 x 2.5 mm² cu. wire

2 x 6 & 1 x 4 mm² cu. wire

S & Fixing duly painted 16 SWG 175mm X 125mm X 65mm M.S. Box comprising with 1 No. 240V 6 pin 16A plug socket with 1No. 16A piano key type switch (All are Anchor Make) with 3mm thick Bakelite top cover and 3 nos. suitable size cu connecting bars each on double bakelite insulation chairs duly fixed inside the switch board flushed in wall with earthing attachment & mending good damages to original finish as to GS.

S & Fixing MS 2-piece type RC fan clamp as per GS.

S & Fixing of 240 V, 100 Watt (EME Step type) Electronic Fan Regulator (Make - Anchor, Cat. No. 65302)

S & Fixing of 240 V, 1420 RPM, 300 mm. Dia A.C. Exhaust Fan (EPC Electrical Pvt. Ltd. - Heavy Duty) with Nuts, Bolts, washers etc. on wall, Cutting hole on wall and mending good the damages to original finish .

S & Fixing of "L" shape Cowl made of G.I sheet of size 300 x 300mm having length 600mm with 4 nos 20x3mm MS flat support and S&F of wire mess at the ends of the said cowl with nuts, bolts etc as reqd. for Exhaust fan.

S & Fixing of 240 V 1200 mm (48") sweep A.C. ceiling fan without regulator incl. down rod, canopy & fan blades etc. complete set and engraving & Painting the Departmental Number upto 15 digit on Fan Body and making necessary interconnection as required. [Make: Crompton HS plus or HB plus / Orient Energy star (wood finish) / USHA Striker Plus]

S & Fixing of 240V Single LED fittings made of 22 SWG sheet and fittings cover must be fixed with two nos screws incl. 1 no 18 /20 Watt LED Tube lamp. [Philips, Cat no.TMC 501 P 1xT LED, Master LED tube, model no. 18W 865 T8 I , or Wipro, Cat no. WIO921208, LED tube LL13-181-650]

S & Fixing of 240V Twin LED fittings made of 22 SWG sheet and fittings cover must be fixed with two nos screws incl. 2 nos 18/20 Watt LED Tube lamp. [Philips, Cat no. TMC 501 P 2 x TLED, Master LED tube, model no. 18W 865 T8 I, or Wipro, Cat no. WIO92 2208, LED tube LL13-181-650]

S & Fixing Extra E.I. Conduit (14 SWG) for suspension of TL fittings exceeding 25 cm with addl. 2x20 mm dia. E.I. Conduit supports & necessary connection by 2 x 1.5 Sq. mm. S/C PVC Cu. Wire, painting etc. as per GS.

S & Fixing Extra fan down rod (14 SWG) with connecting wire for hanging the fans with S&F of Hevy type insulaters, Nuts, bolts, Washers, Split pins etc. & necessary inter-connection as per the direction of EIC.

Supply of 230 V., 18" (450mm) 4 (four) Blades Industrial type Air-Circulator Pedestal Fan complete with all accessories such as Regulator, Cord and 16 Amp. 3-pin Top (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty)

Supply & Fixing of 230V, 18" (450mm) 4 (four) Blades Industrial type Bracket Fan complete with assembling all accessories of motor shaft, blade & cage guard with S/F of 100mm long 10mm dia anchor fastners & other fixing materials and making connection. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty) for waiting area.

Supply & Laying of 1.1 KV Grade 3 Core 6 mm² XLPE Ar./ Al. Cable incl mending good damages to original finish as to G.S. as follows:-

Concealed in wall

Surface on wall by MS saddle

S & Fixing compression type gland & Finishing the end with dowells solderless socket by crimping method for 3 Core 6 sqmm XLPE Ar./Al. Cable.

S & Fixing of LED street light (IP 66) made of pressure die cast Aluminium housing with toughend glass and high power LEDs and secoundry lenses suitable for mounting on 50 mm dia (OD) arm bracket [Make: Philips, Type BRP409 LED 130 CW SLA FG PSU GR V2 / Wipro, Cat No. LR02-102-XXX-57-G2 ].

S & Fixing of LED street light (IP 66) made of pressure die cast Aluminium housing with toughend glass and high power LEDs and secoundry lenses suitable for mounting on 50 mm dia (OD) arm bracket [Make: Philips, Type BRP340 LED 150 CW HO SLCS 2P SUGR / Wipro, Cat No. LR02-132-XXX-57-G2 ].

S & Fixing 40 mm dia GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded copper wire and making connections as required for fixing outdoor street light type LED light fittings and mending good damages to wall incl. painting etc.

S & Fixing 1 mm thick 250 x 250 x 100 mm stainless steel loop box with 4 way connector/ stud, 16A porcelain kitkat fuse on porcelain chair, rubber gasket, mechanical locking arrangement fixed on wall with earthing attachment complete.

S & Drawing 1.1kV Gr. 3 core 2.5 sq. mm. stranded FRLS PVC unurmared Cu cable (Finolex/Havells/Polycab) in PVC Rigid conduit pipe and existing arm bracket from loop Box to fittings for necessary connection.

Finishing the end of 3 x 2.5 mm² copper wire with dowells solderless socket by crimping method as pre GS.

S & Fixing of 250V, 25A single timer controller in SS double door 12-way DB enclosure (L&T/ABB/Schneider) with S&F following electrical accessories & front door locking arrangement with all connections by finishing the ends of 2 x 4 & 1 x 2.5 mm² copper wire with dowells solderless socket by crimping method as to GS, earthing attachment on wall incl. necessary connections as per direction of EIC:-

i) 25A DPMCB (L&T/ABB/Schneider) -- 1no

ii) 24Hr programmable Digital dial timer (L&T,Cat no 67DDT0) -- 1no

iii) 3 pole power contactor (LT make cat no MNX22/230V) -- 2nos

iv) 2 Moduler AC motor starter (Legrand/Myrius Cat no 673031) -- 1no

v) 1 moudle 10A Moduler switch (Make Legrand /Myrius) -- 1no

vi) 3 moudle plate with cover (Make Legrand /Myrius) -- 1no

vii) 25A Auto-Off-Bipass DPDT toggle switch (approved make) - 1no

viii) LED indication lamp (approved make) -- 1 no

ix) Outgoing connector make ELMAX (approved make) -- 2 nos

S & Fixing of 50 mm dia medium duty G.I. pipe (ISI-M) to be laid in underground / vertically on wall surface for cable protection purpose.

Connecting the equipments to earth busbar incl. S & Drawing No. 6 SWG G.I. earth wire as to G.S.

S & Fixing Earth bus-bar of Galvanized MS flat 25 mm x 6 mm including nuts, bolts & washers etc. as to GS.

Earthing the installation by 50mm dia G.I. pipe (TATA/ISI-M) for soft soil including excavation of soil & ramming the soil as per G.S.

Defect Liability Period -1 (One) year

SIMPSON AND FERRIS PVT LTD

NEW INDIA ELECTRICAL AND ENGINEERING WORKS