Repairing of five nos of Pig Stay, a Duck Shed, a Cow Shed etc. at IFM Rani, Kamrup under SOPDG Scheme.

Amount

15.30 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of entering and shuttering - All work up to plinthlevel : 4.1.3 1:2:4 (1 cement : 2 coarse sand zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mmnominal size derived rom natural sources)

11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick

15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 G.S. Sheet

12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer oated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete. 0.63 m thick with zinc coating not less than 275 gm/m²

9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick or windows etc. including 62 x19 mm beading ofsecond class teak wood and priming coat ith pproved steel primer allcomplete.

13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.44 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface aint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat f rimer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Labour for remove and carry out scatered materials from pig stays which are damaged by strom. {Rs. 645.00)

Refitting of main gate of RELIM office building , refitting of GI sheet roofing of Watchmen shed ( LS . R.s 25000.00)

15.38 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading ncluding stacking the serviceable material within 50metres lead.`

15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including howkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead :15.12.1 Of rea 3 sq. metres and below

15.39 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) ecorative type, core of block board construction withframe of 1st class hard wood and well atched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces fshutters.9.20.1 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary crews

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

13.50 Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with olymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet ashers or with G.I. limpetwashers filled with white lead, including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete (up to any itch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and russes nd including cuttingto size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : 11.33.1 Second class teak wood

9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick or windows etc. including 62 x19 mm beading ofsecond class teak wood and priming coat ith pproved steel primer allcomplete.

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in oundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including ressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated oil anddisposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of oil.

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 11.1.2 1:6 (1cement : 6 coarse sand)

11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

10.14 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured rom commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, ead nd if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 1.60 m,pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. ressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as pecified and applying a coatof approved steel primer after pre-treatment of the surface as irected 10.14.1 Profile B10.14.1.1 Fixing with adjustable lugs with split end tail toeach jamb

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) ecorative type, core of block board construction withframe of 1st class hard wood and well atched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces fshutters.9.20.1 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary crews

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding

12.50 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of orrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness ith inc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy rimer n both side of the sheet and polyester top coat 15-18microns. Sheet should have protective uard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall e fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete pto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters nd russes and including cutting to size and shape wherever required.

12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+.05 %) total coated thickness, Zinc coating120 grams per sqm as per IS: 277, in 240 mpa teel rade, 5-7microns epoxy primer on both side of the sheet and polyester topcoat 15-18 icrons sing self drilling/ self tapping screws complete :12.51.1 Ridges plain (500 - 600mm)

2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

1.1.1 Wiring for light/Fan/call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch phenolic laminated sheet, suitable size M/s box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A

1.1.2 Wiring for light/Fan/call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch phenolic laminated sheet, suitable size M/s box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B

1.1.3 Wiring for light/Fan/call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch phenolic laminated sheet, suitable size M/s box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

1.3.2 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B

1.6 Wiring for light/power plug with 4x4 sq. mm. FRLS PVC insulated copper conductor single core cable in surface recessed steel conduit alongwith 2 nos. 4 sq. mm. FRLS PVC insulated copper conductor single core cable for loop earthing

1.7.1 Wiring for circuit wiring alongwith earth wire with the following size of LRLS PVC insulated copper conductor single core cable in surface/ Recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.7.4 Wiring for circuit wiring alongwith earth wire with the following size of LRLS PVC insulated copper conductor single core cable in surface/ Recessed steel conduit as required 2x6 sq.mm. + 1x6 sq. mm. earth wire

1.23.3 Supplying and fixing following piano type switch/socket and the existing switch box/cover including connection etc. as required. 15/16A switch

MONSOON ENTERPRISE (BID ID -245664)