ADDITION/ ALTERATION AND SPECIAL REPAIRS TO AC STORE (BLDG NO. P-16) AND INDUSTRIAL CANTEEN (BLDG NO. P-21) AT MO (KAR), NAVAL BASE KARWAR

Amount

Demolition of cement concrete in any position and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish complete all as specified and as directed by Engineer-in-charge.

Demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Dismantling/ taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200 m and not exc 250 m complete all as specified and directed.

Taking down of cement plaster from wall surfaces of any description etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down wooden/ PVC/ FRP chowkhats or frames with shutters (without taking off shutter from the frame) exc 1.5 sqm but not exc 4 sqm each including making good disturbed portion to match with adjoining surfaces complete all as specified and directed.

M & L for vitrified ceramic tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for vitrified ceramic tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 using 20 mm graded aggregate as in lintel, beams complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc. complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia & above cut to length, bent to shape required including cranking, bending etc complete all as specified and directed.

Description all as per item No 11.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for providing precast cement concrete solid building blocks masonry exc 10 cm width, type C1, 1:3:6 (20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick using WPC in two coats (10 mm thick backing coat + 5 mm thick finishing coat) on block masonry surfaces or concrete surfaces of walls or on roof top in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound complete all as specified and directed.

M & L for water proofing treatment by applying oil bound bitumen primer having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 4 Kg/Sqm of approved make including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1 Kg/Sqm complete all as specified and directed.

M & L for repair of cracks by cutting out cracks to V-section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M & L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/ Rain coat 601 of DR fixit/ Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturer's instructions complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls of any description including and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls of any description and applying two coats of acrylic washable distemper over a coat of primer all as specified and directed.

M & L for cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in coping etc. including necessary formwork including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dado and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm and not exc 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M & L for machine cut cudappah stone slab 20 - 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including cement screed base in CM 1:6 complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S & F in repairs vitreous china wash basin coloured oval shape 560 x 410 mm complete but excluding pillar taps mounted on granite platform all as specified and directed. MAKE: Hindware Cat No 10017 starwhite or equivalent in parryware or Nycer.

S & F in repairs vitreous china urinals, full stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe all as specified and directed.

S & F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rest water closet etc complete all as specified and directed.

S & F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.

S & F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm including bends elbows, tees etc & fixing materials i.e HDPE/PVC gum laid in trenches complete all as specified and directed.

S & F brass chromium plated health faucet with spring pipe complete all as speified and directed. MAKE: Jaquar Cat No ALD-CHR-585 or equivalent in Czar/ Mark.

S & F in repairs towel rail 600 mm chromium plated all as specified and directed. MAKE: Jaquar, Czar, Mark

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated, screwed for iron pipe15 mm bore all as specified and directed.

S & F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S & F in repairs MS chromium plated grating 125 mm dia suitable for Nahani trap all as directed.

S & F PVC connection 15 mm size, 450 mm long with two Nos PTMT nuts all as specified and directed.

S & F push cock with sprinkler flush for urinal pot complete all as specified and directed.

S & F in repairs stop valves cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15 m bore all as specified and directed.

S & F in repairs brass CP shower rose 125 mm size with swivel joints any size including to steel pipe or union complete all as specified and directed.

Taking up or down GI tubing 15 mm bore and connections all as directed.

Description all as per item No. 46.00 above before but 20 mm bore.

S & F CPVC pipes of dia 16 mm SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Description all as per item No. 48.00 above but 20 mm bore.

S & F 75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single sockted in any length with rubber ring joints laid in floor complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification complete all as specified and directed by Engr-in-Charge.

S & F in factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction complete all as specified and directed by Engr-in-Charge.

S & F 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium of Size 600 x 600 mm complete all as specified and directed.

S & F anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling Tee of size 24 x 28.5 mm made out of PGI sheet 0.3 mm thick double at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x 0.45 mm powder coated for ceiling complete all as specified and directed.

S & F hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed.

S & F powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F in repairs powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

S & F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S & F aluminium powder coated window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading screws, hinges and handles (2 Nos) etc complete all as specified and directed.

M & L for 4 mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

M & L 4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S & F aluminium body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M & L for prelaminated particle board 12 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws in aluminium frame work all as specified & directed.

S & F in repairs mortice locks brass vertical type size 100 mm, 4 levers brass chromium plated with keys in duplicate all as specified and directed.

S & F aluminium powder coated barrel tower bolts of extruded section 200 mm long all as specified and directed.

S & F butt hinges 125 mm size, medium weight, extruded powder coated aluminium alloy with galvanised mild steel hinge pin anodised type C-21 complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250 mm long complete all as specified and directed.

S & F extruded powder coated aluminium handle, fabricated type 150 mm long all as specified and directed.

M & L for preparation of old decorated surfaces of walls any description and applying one coat of acrylic washable distemper all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling any description and applying one coat of acrylic washable distemper all as specified and directed.

M & L for preparation of old painted plastered surfaces of walls/ceilings of any description over 10 cm girth or width including cornices and applying one coat of acrylic weather proof exterior emulsion paint all as specified and directed

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good surfaces of walls/floors etc complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm two single core PVC (FRLS) insulated, unsheathed 1100 Volts grade cable with stranded copper conductor FR grade conforming to IS-694 Part-II, 1990 with ISI mark drawn through and including suitable size rigid non metallic PVC conduit concealed with all accessories, including suitable size sunk pressed steel or cast iron terminal box with 3 mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of swithce, sockets, fan regulators etc inlcuding providing 1.5 Sqmm PVC insulated unsheathed solid copper conductor cable as earth wire connected to metallic bodies of luminaries/ fan etc at one end and to common earth dolly at other end complete all as specified and directed by Engr-in-Charge for fan/ light point.

Description all as per Item No. 74.00 here-in-above but for one 5 Amps socket point on independent board complete all as specified and directed by Engr-in-Charge.

Description all as per Item No. 74.00 here-in-above but using 2.5 Sqmm copper conductor multistranded for powerpoints on independent board complete all as specified and directed by Engr-in-Charge.

S & F in repairs decorative ultra slim aluminium square profile LED lighting fixture with high lumen output, environment friendly, energy efficient, ready to use for upto 1 x 24 W LED tube light all as specified & directed. MAKE: Havells, Cat No LHEXACP7IN1S024 UPTO 1X24 or equivalent in Bajaj/ CG/ Shakti.

S & F aesthetically designed recessed mounted panel in a light weight plastic body available in 22 W for upto 1 x 22 W LED tube light all as specified & directed. MAKE: Havells Cat No LHEBGAP7IZ1W022 UPTO 1X22 or equivalent in Bajaj/ CG/ Shakti.

S & F in repairs ceiling fan 1200 mm sweep including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/ 0.0076 and testing including taking down old defective ceiling fan and depositing the same to MES store yard complete all as specified and directed. MAKE: Crompton Greaves Model No. Briz Air or equivalent in Orient/Bajaj/Usha/Khaitan

S & F in repairs exhaust fan of 300 mm sweep after assembling at site including electric connection from ceiling rose to connector wiith flexible cord twin core twisted copper of size 23/ 0.0076 and testing including taking down old defective exhaust fan and depositing the same to MES store yard complete all as specified and directed.

Supply and fix in repairs switch Piano 5 Amps one way flush type, matching with existing make ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 2 in 1, 5 pin, 5 Amps flush type, matching with existing make ISI marked, all as specified and directed.

Supply and fix in repairs switch socket combination 5/16 Amps, 5 in 1, flush type, multi purpose matching with existing make ISI marked, all as specified and directed.

M & L in repairs for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 V grade 4.0 Sqmm through and including suitable size PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc. including one run of 4.0 Sqmm PVC insulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs sheet metal enclosure MCB DB SPN 8 ways double door type suitable bus bar complete all as specified and directed.

Supply and fix in repairs MCB SP 'C' series 5 to 40 Amps 230 V with 10 KA rupturing capacity complete all as specified and directed. MAKE: Havells Cat No. DHMGCSPF006-032 or equivalent in Bajaj, Philips, CG

Supply and fix in repairs MCB SPN 'C' series 5 to 40 Amps 230 V with 10 KA rupturing capacity complete all as specified and directed. MAKE: Havells Cat No. DHMGCSNF006-032 or equivalent in Bajaj, Philips, CG

M/S KAMALKANTH NAIK

Bidder Name

K.G.SHANKER

M/S KAMALKANTH NAIK