Construction of Damaged cross drainage structure including allied works near RD 1310M of D 16 of Main Ravi Canal

Amount

Dismantling of existing damaged cross drainage work including dismantling of RCC Slab, abutments etc. All Complete including disposal of unserviceable material within 50m lead

Clearance of Mulba slush from cross Drainage structure and near inlet and outlet of structure

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) : Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) : Crushed

Dumping stone excluding cost of stones.: In Horizontal on level

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level 1:2:4(1 cement:2coarse sand:4graded stone aggregate 20mm nominal size i:Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering, finishing and reinforcement-All work upto plinth level.: 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straighteing, cutting, bending, placing in position and binding all complete. Cold twisted bars

Demolishing cement concrete maFJually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix

Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates: 20mm nominal) @ 6.00cum per 100 sq m on horizontal/side slopes: complete including curing. Crushed

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 em in depth, breaking clods, ,- watering, rolling each layer with half tonne roller or wooden Lor steel rammers, and rolling every third and top -most layer with power roller of minimun 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or tilling up ground depressions lead upto 50 mtr and lift upto 1. 5 mtr. in All kinds of soil:

Centring and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centring and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls above 20cm wide

Supply of Nallah stones

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Carriage of Materials from Source to site of work Carriage of Sand, stone agg. Below 40mm nominal size av. 12 Kms by Mechanical Transport

Carriage of Materials from Source to site of work Carriage of stone agg. Below 40mm nominal size and above av. 12 Kms by Mechanical Transport

Carriage of Materials from Source to site of work Carriage of stone aggregate av. 15 Km by Mechanical Transport

Carriage of Materials from Source to site of work Carriage of earth aggregate av. 100MT by Head Load

Carriage of Materials from Source to site of work Carriage of Cement and steel from Division store to site of work av. 30 Km by Mechanical Transport

Sanjay Kumar

VIKRAM SINGH