SPL REPAIRS/REPLACEMENT OF AMR METER, LT PANEL AND CONNECTED ACCESSORIES AT IAM IAF UNDER GE (AF) MARATHAHALLI BANGALORE

Amount

Taking down old existing energymeter any type any capacity by disconnecting electrical connection carefully and deposited to MES store complete all as specified and as directed.

Repair/replacement of existing DB with compartmentalized factory made meter box 4 qtrs ( 1+4) with incoming MCCB 63 A, 4 Pole 16 KA and out going MCB SPN 40 Amp 4 Nos and 6 Amp MCB SP 1 No fixed on wall with MS angle section 40mm x40mmx 5mm base frame complete all as specified and as directed. (Note : KWH meter , MCCB and MCB shall be measure and paid seperately under relevent item of this scheduled )

Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 6 Sqmm along with one run 6 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit complete all as specified and as directed.

Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC Complete all as specified and as directed including taking out the existing.

Supply and Fixing in repairs MCB SPN 40 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC Complete all as specified and as directed including taking out the existing.

Supply and fixing MCCB 4 pole 63 Amp ,16 KA including taking out the existing

Polycarbonate meter box for 1 phase smart meter

Polycarbonate meter box for 3 phase smart meter

Supply and Installation of Smart RF Single Phase Meter with the following specifications: (a) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh network or any other latest technology as per govt norms approved with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. (b) Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software (c) Meter should have connect / disconnect functionality operable from billing software (d) The meter should support open communication protocol DLMS with the software ( Note :- Smart meters shall have 5 years warranty) MAKE : L&T/ Secure / Schneider /HPL/ ABB/ Havells /Anchor Panasonic /Elmeasure.

Supply and Installation of Smart RF Three Phase Meter with the following specifications: (a) AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh network or any other latest technology as per govt norms approved with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. (b) Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software (c) Meter should have connect / disconnect functionality operable from billing software (d) The meter should support open communication protocol DLMS with the software (Note :- Meters shall have 5 years OEM Warranty) MAKE:L&T/ Secure / Schneider /HPL/ ABB/ Havells /Anchor Panasonic /Elmeasure.

Supply and Installation of IP-67 protection Data Concentrator Units (DCU) compatible for remote Automatic Metering Infrastructure (AMI) solution and capable of communicating with the smart energy Meter in the corresponding frequency band and with the data server through GPRS/Ethernet. It would have internal memory to store data of at least 200 modules. It would have inbuilt battery back-up. It would have IP-67 protection. It would support auto discovery of the meters and self healing mechanism for the breaks in the RF network. Note: operating cost / sim recharge / maint of (DCU) deemed to be included in the quoted rates for defect liability period of 2 years from certified date of completion of work. Make: Authorised by meter vendor

Supply and Configuration of the Web based Software per meter with hosting and configuration of smart meter data at NIC cloud for up to 24 monthswith following modules: (i) Meter Data Management Module The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The meter data management system would capture and provide the following data: (a) 15 min instantaneous data from all the meters for seven parameters – Cumulative Energy, Cumulative Apparent Energy (as applicable), Power, Current, Voltage, Power Factor and Frequency. (b) Monthly billing survey data for cum energy and max demand

(ii) Billing Module The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data / billing data available to admin and end users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing. The system would be setup as postpaid billing system. It would allow postpaid and prepaid functionality as required. (iii) Occupation and Vacation Module The system would support occupation / vacation and billing reports. The software would be collecting data from DCU. The software would provide access to staff as well as the occupant for the data. (iv) Web site: There would be a dedicated website for the AGE and BSO team to view all the data and information. The designated users in MES would have the admin access to the application. The MES staff would also have the access of the key information on an android mobiles app (for admin use). (v) Customer Portal The system would include a customer portal for the resident /occupant to log in and view their own energy / billing data. There would be android and iOS mobile apps for the user to monitor its own data and balance on regular basis.

(vi) Energy Accounting Module The system would include features of energy accounting. The system would be able to account for total energy block wise, facility wise and would also allow calculations of unaccounted energy in case total energy meter is also available. (vii) Communication Module The system would provide communication of energy data and bills via print, email and sms methods. (viii) Meter Master Data The system would support meter master data repository. The system would support meter replacement process. (ix) Excel Export The system would support export of metering and billing data in excel format. (x) Customer Care Module - The software would include a customer care module where the user would be log in any complaints. The service provider would monitor the complaints and carry out the necessary activities for the complaints resolution. (xi) Meter Installation Module - The software would include an app based meter installation module where the meter installation or changes can be captured on the app itself and the readings may be demonstrated to the user if required on the app itself.

(xii) Activities Communication - The software support communication of the various activities such as occupation, vacation, meter change. personal detail change etc. with the user as well as the department on email. Make : Authorised by meter vendor Note :- (a) The software would be hosted on MEITY (Ministry of Information Technology) approved GCC (Government Community Cloud) or on MES server as provided. (b) One payment gateway would be installed provided a bank account is opened at GE level. (c) The software ans system would contain two year defect liability including all operating expenses such as GPRS charges, hosting charges etc. (d) The configuration of smart meters will be through software and such software will be compatiable with all makes of smart meters. (e) Software for smart meters shall be the same OEM and developed in India only. Third party software is not acceptable.

Comprehensive maintenance including operating costs for period of one year after two years of defect liability period. The comprehensive maintenence shall include the following. (a) Monthly sim charges for the DCU. The contractor would ensure supply of appropriate SIMs to ensure necessary signal availability. The contractor would change the sim or sim provider as required. In case of network issues, the contractor would liaison with the telecom service providers for necessary resolution. (b) Recurring SMS charges. The SMS would be issued for the payments alerts, low balance alerts and disconnection / connection alerts. (c) Software AMC. This would include necessary upgradations in the software such as support to the chrome browser changes, android version changes , iOS version changes. These changes happen on frequent basis and the software would support all the changes. (d) Changes in the government tariff structure. The government tariff structure changes may require software upgrade. The same would be included in the AMC scope of work. (e) Remote server admin support - Ensuring adequate database back up, upgradations in the operating system, anti virus updates, database upgrade etc.

(f) Reports Development - The additional reports as needed for the success of the project would be developed (g) Software installation on any alternate / backup server if required. (h) The communication network monitoring and support (j) Configuration of the repaired / replaced hardware in the system (k) Trouble shooting and necessary actions to run the system as required. (l) Software bug fixing as and when required Note:During defect liability period operating costs such as recharge of sim / DCU and system / software update deemed to be included in the quoted rates against respective item i.e.(item No.11 & 12 of BOQ).

Provision of infrastructure for Vending system like computer PC capacitive touch desktop with processor i-5, 9 Generation, 8-GB RAM, hard disk 1TB, 4-USB Port including 18.5" monitor of same make, keyboard mouse, Make-HP/DELL/IBM with licensed Operating system (Windows 10), along with 650 VA capacity UPS all as specified.

Provision of print, copy, scan, capacitive touch wireless Report Printer with 12 pages per minute capacity, 600 x 600 dpi with HP, REt, 1200 dpi effective output quality (600 x 600 x 2 dpi with REt, with duty cycle 3,000 single-sided pages per month for report printing complete as required, Make: HP LaserJet or equivalent in canon, Epson and Samsung printer all as specified.

ARUNOTHAYA TRADERS

Aavani BUILDERS AND CONTRACTORS

ACE PROMOTERS

Chandana Enterprises

ANAND REFRIGERATION