AME of Head work of Malllabad Lift irrigation Scheme under Lift-2 for the year 2025-26 & 2026-27(Maintenance Charges)

Name of Work: AME of Head work of Malllabad Lift irrigation Scheme under Lift-2 for the year 2025-26 & 2026-27(Maintenance Charges) (Indent No:2713)

SI QTY ITEM OF DESCRIPTION UNIT Rate TOTAL

1 9 Engineer- Grade-II DIPLOMA Mechanical for over all supervision Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stations as per directions of Engineer-in-Charge. Per Month 29033.9016 261305.11

2 9 Engineer- Grade-II DIPLOMA Electrical for for over all supervision Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stations as per directions of Engineer-in-Charge. Per Month 29033.9016 261305.11

3 40 Pump Operators- ITI/ITC/JOC/WIREMAN for over all supervision, Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stationas as per directions of Engineer-in-Charge. Per Month 17004.1058 680164.23

4 40 HEAVY Mazdoors for cleaning of Pump Houses and 33/6.6 KV Sub-Station at Mallabad Lift Irrigation Scheme under Lift-2 as per directions of Engineer-in-Charge. Per Month 15619.7327 624789.31

5 72 Watchmen for security of Mallabad Lift Irrigation Scheme under Lift-2 for security and surveilance of Pump Houses and 33/6.6 KV Sub-Stations as per directions of Engineer-in-Charge. Per Month 15619.7327 1124620.75

6 0.50 EHV Grade Transformer Oil - New KL 110822.25 55411.13

7 1.00 OLTC of Power Transformers : Repair and overhauling of OLTC each Divertor switch including hange of oil, lubrication and replacement of gaskets and other parts which are locally available Per Transformer 20625.15 20625.15

8 1.00 Testing the Transformer for routine tests as per IS 2026-1983 if repairs are carried out at Repairer's work. Per Transformer 19936.35 19936.35

9 1.00 Testing of C&R panels:Testing for insulation level, testing of relays, control operations for closing tripping etc., interlock. Alarm annunciation & indicationchecks (without SAS) Per panel 36186.15 36186.15

10 210.00 Filling of oil to the main tank and OLTC tank, filtering the oil including filtering till attainment of prescribed BDV valves including labour, filtering equipment along with accessories. Litre 5.59 1173.90

11 1.00 Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in sheet metal enclosure with operating console complete for use along with Power factor Capacitor Bank as per specifications, terms and conditions of contract. Per set 489951 489951.00

12 6.00 Work of overhauling and servicing and repairing of southern switch gear make breakers of motor as specified below: Lowering the breaker from the panel after isolating the supply, draw out the breaker truck from the panel, checking the fixed and moving contacts. Removing the burnt out parts from the breaker. Supply and fixing of new closing assembly, rose contact, copper poker, banana link, lifting awwembly. Checking the mechanical parts such as moving cam, lifting bar assembly, tripping mechanism and closing mechanism of the breaker and servicing the entire breaker. Check the trip and closing coil of the breaker replace the same if required.Replace the oil (Supply by departmentally). The breaker has to be checked in test position after complete servicing for proper operation and satisfaction Job 80004.93 480029.58

13 3.00 Lightning Arrester 30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2 for 33/6.6kv Nos 14816.0 44448.00

14 50.00 Grease GEM-RR3 kg 317.0 15850.00

15 2.00 Master Trip Relay suitable for C&R panels at 110 kV and 66 kV Stations for 33/6.6kv NOS 17750.25 35500.50

16 3.00 Trip Circuit Supervision Relay suitable for C&R panels NOS 8466.15 25398.45

17 50.00 Cotton Waste kg 51.0 2550.00

18 6.00 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 9315.00 55890.00

19 5.00 Supply and fixing of Auxiliary contactor relay with 2 NO and 2 NC contact and operating coil voltage of 220V to 260V. fixed on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., Each 1330.00 6650.00

20 4.00 Supply and delivery at site of brand new Reputed make pressure gaugebourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 100 mm Each 696.51 2786.04

21 175.00 Lubricant oil for Motors Litres 307.65 53838.75

22 1.00 Work of repair and servicing of LOCB breakers of motor feeders and spare breakers as specified below: MECHANICAL PORTION: Removing the complete unit breaker mechanism from the breaker without damaging the arc chamber, wiring to be recorded before removing the breaker mechanism. Dismantling the tension spring latching unit etc., inspecting the alignment and rectify the fault in breakers for proper closing and opening cleaning all moving contact finger contact and fixed contact by C.T.C replace the oil by new oil (Oil will be supplied by the departments). ELECTRICAL PORTION: Checking of entire electrical operation of the breaker panel checking ON & OFF circuit, change over scheme replacement of closing coil, tripping coil, closing contactor wiring should be checked as per drawing, damaged wire should be replaced by new one, all the required spare will be supplied by departmentally. The work should be carried out without disturbing other running equipment Job 19241.25 19241.25

23 5.00 Fixing of HT fuse units & wiring per set 1991.85 9959.25

24 3.00 Replacement of Butterfly valves, bolts, nuts and rubber liner-1000 mm dia No 2992.5 8977.50

25 3.00 Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of grade GGG-40/50, seals are made of approved EPDM, SS 304 float, guide and internals. Flange drilling according to IS-1538 with appurtenances.complete. Body and bonnet shall be coated with electrostatically applied epoxy powder coating with a coating thickness of 250 micron both inside and outside etc. complete for Air valve of 150 mm dia No 41170.5 123511.50

26 3.00 Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of grade GGG-40/50, seals are made of approved EPDM, SS 304 float, guide and internals. Flange drilling according to IS-1538 with appurtenances.complete. Body and bonnet shall be coated with electrostatically applied epoxy powder coating with a coating thickness of 250 micron both inside and outside etc. complete for Air valve of 200 mm dia No 53004.0 159012.00

27 1.00 Battery Set Plante/Grid Plate type 48 V, 200 AH KPTCL Set 354469.5 354469.50

28 1.00 Supply erection testing and commssioning of New circuit breaker MAKE ABB Suitable for Existing motor feeder Panel TYPE VD4 12kv ,630 Amps IN.28KV/75 KV PK ,26.3KA rms 1 sec, Clsing and openng coil volts.110 V DC ,Spring charging Motor 230V AC, Includng all necessary accessories as per IEC 62271-100 Standred . Nos 685608 685608.00

29 1.00 Complete Motor Rewinding ,Overhauling and servicing of 1300KW, 1743 HP, 6600V ,50 HZ, RPM .742 3Phase HT Motor Jyothi Make including Transportation dismentling Rerection Testng and COMMIIONING ,ALL SCOPE INCLUDING for capacity 1650HP Nos 2300000 2300000.00

Total 7959189.00

Add GST 18% 1432655

Grand Total 9391844.00

EXECUTIVE ENGINEER,

KBJNL, MBC O&M DIVISION ,